Highlift jack
#31
Guest
Posts: n/a
Re: Highlift jack
Mount it on the bumper. If bumper is not suitable, replace bumper with
one having a 'roo (brush, bull) bar and mount it on that. Or add a bar
that mounts to the frame.
I use a bike lock to secure it (in addition to wing nuts and bolts).
Charles.
somebody wrote:
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
one having a 'roo (brush, bull) bar and mount it on that. Or add a bar
that mounts to the frame.
I use a bike lock to secure it (in addition to wing nuts and bolts).
Charles.
somebody wrote:
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
#32
Guest
Posts: n/a
Re: Highlift jack
As all have said: it is not a jack for changing tires or doing any other
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
#33
Guest
Posts: n/a
Re: Highlift jack
As all have said: it is not a jack for changing tires or doing any other
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
#34
Guest
Posts: n/a
Re: Highlift jack
As all have said: it is not a jack for changing tires or doing any other
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
kind of work on your jeep, but this past weekend I had a chance to teach my
son some tricks for getting un-stuck. He and a friend went out wheeling in
the Wrangler and misjudged some ruts. He managed to high center the axles.
After a mile and a half walk back to the house he wanted me to start the
tractor. Instead I told him to go get the jack and we walked back out. I had
him jack the front end up as high as it would go and then pushed it over so
that the front wheels were out of the ruts. Repeated the same for the rear.
Unstuck. Lesson 1: watch your center height. Lesson 2: you don't always need
heavy equipment to get unstuck. Lesson 3: plan for the worst and carry what
you need.
At least I was having fun.
jeff
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:10pkgo1bhmocjd7@corp.supernews.com...
> I agree with Mike in that there is probably not a more dangerous tool that
> can be owned and carried in a Jeep.
>
> Having said that, it is a very useful tool in many different situations. A
> HiLift is NOT, that's N-O-T, to be used for simple lifting like is needed
to
> fix a flat. A HiLift is very useful as an alternative to a winch, it is
most
> useful to lift your Jeep so you can put large stuff under a tire so you
can
> get going again.
>
> If a HiLift is used to lift a Jeep so one can perform service, always,
> that's A-L-W-A-Y-S put something under the frame and lower the vehicle
onto
> it so the vehicle will not be in danger of falling off of the jack. There
> are two safety issues relative to HiLift Jacks, one is that the vehicle
can
> fall off or the jack will tip over and drop the vehicle, and the other is
> that when attempting to lower the vehicle, the jack can run away and the
> jack handle will flail about violently and seriously injure somebody. I
have
> never seen a jack handle kill anybody, but this is obviously a possibility
> because the nick name for a HiLift is exactly as Mike suggests, widow
maker.
> Your wife can become a widow because the inherently unstable jack will
drop
> the vehicle on somebody, or the handle will beat the life out of you.
#35
Guest
Posts: n/a
Re: Highlift jack
Hey,
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
#36
Guest
Posts: n/a
Re: Highlift jack
Hey,
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
#37
Guest
Posts: n/a
Re: Highlift jack
Hey,
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
I have seen a site where the guy put the jack under the hood mounting it on
the two cross bars just above the engine, but I can't seem to find the site
now. Sorry.
Tom
"somebody" <scope_addict@verizon.net> wrote in message
news:gKjmd.4864$N_5.4218@trnddc03...
> buying one of these tommorrow,
> any good mounting tips?
> are there any mounting brackets one can buy??
>
> johnp
>
>
>
>
#38
Guest
Posts: n/a
Re: Highlift jack
and welding the gas tank !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>
#39
Guest
Posts: n/a
Re: Highlift jack
and welding the gas tank !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>
#40
Guest
Posts: n/a
Re: Highlift jack
and welding the gas tank !
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:ia-dnQXLtNPVvgfcRVn-uA@magma.ca...
> LOL that's the one
> Thanks
>
> Steve wrote:
>
> >
> > http://www.tractorbynet.com/forumfil...811-repair.jpg
> >
> > --
> >
> > Steve
> > http://xjeep.dyndns.org
> >
> >
> > FrankW wrote:
> >
> >> Hehe I got this picture that a freind sent me
> >> with a subject header "Why women live longer"
> >> Maybe if Bill will let me send it to him.
> >> He'll post a link to it for all to see.
> >> Or anyone else for that matter
> >>
> >>
> >> Mike Romain wrote:
> >>
> >>> The best place is to hang it on a big assed nail in the back of the
barn
> >>> where it belongs.
> >>>
> >>> In my opinion those 'widow makers' have no business anywhere near a
> >>> Jeep. They are a farm tool made for pulling fence posts and raising
> >>> barns for new footings.
> >>>
> >>> If you need a jack, buy a jack. If you need a winch, they make nice
> >>> hand cable winches. My hydraulic floor jack fits behind my passenger
> >>> seat tight and the winch tucks in under the seat.
> >>>
> >>> Mike
> >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> 88 Cherokee 235 BFG AT's
> >>>
> >>> somebody wrote:
> >>>
> >>>> buying one of these tommorrow,
> >>>> any good mounting tips?
> >>>> are there any mounting brackets one can buy??
> >>>>
> >>>> johnp
> >>
> >>
> >>
>