Hey Mike
Guest
Posts: n/a
Re: Hey Mike
You all need to get a life, my bitch was with mike and his abortion
comment. I understand the confusion with the thread and was even
appologetic to mike. At one point in a earlier thread I called bill a jeep
knowledge god and mike a close second. His knowledge and helpfulness was
not my complaint to him, and if you all can read, I addressed this to him
and not to you. My bitch was him calling my project an abortion. He also
came across at times as having an uppity attitude, guessing he's french
canadian. Aside from that, I decided to call him out. If he wants to call
my project an abortion, he can meet me on the street corner where I'll kick
his ***. I can tell the difference from good advice, bad advice and can
even take sarcasm. But I took extreme offense to his abortion comment.
Too bad he has to have others come out and fight his battles. I admit I
gave some incorrect details when I was asking questions through the thread,
but isn't that what this forum is about??? Learning??? Like I said in
previous quotes, the only "time a question is stupid is when you ask it a
third time to the same person". Too many people were answering my
questions after assuming details.. RE stands for Rubicon Extreme by the
way. Part of the problem was they were closed saturday afternoon and
sunday for tech support. The other problem was posting my thread on
saturday when all the drunks would be answering, and third... I confused
issues with some incorrect information on the steering, suspention
component labeling....and that was in part because I was stressed and
confused myself. I admitted that and even appologized to the group and
mike for that...
But I stand by my principle that I am EXTREMELY OFFENDED by mikes calling
my project an abortion. My response wasn't the most adult like, but I was
pissed off when I wrote it.
Probably should have followed my own advice, and allowed myself to cool
down before I slandered his mother and canada, and for that I will
applogize, but he still had a sarcastic uppity (french) attitude I was and
still am in no mood to tolerate. I have no idea if he is french canadian
or not, just slandering the french for the moment for no other reason than
they are french, and pussied out in iraq, and back stabbed the USA prior to
the war.
Mike still owes me an appology.....
and yes,,,I am a licensed elctrician, and do know HVAC. I'm also a
licensed plumber and hold certificates in boiler service and pressure
vessel manufacturing and pipefitting. I was in charge of all of the start
up of building equipment of the new/remodeled state capitol building in
washington state-USA. I do know and have many skills in many areas. I am
not an engineer, and don't know much about jeeps, but do know much about
4x4ing. Mike has been great with information. I wasn't pissed that he
didn't know my answers. He tried his best and so did everyone else to
understand my question. But he insulted me tremendously with his abortion
comment, and thats why I called him out. So, everyone, go back in your
house, and if he wants to meet me at the corner and duke it out, fine. If
not, I've said my peace and he's gotten the message that I'm pissed about
the comment and we can all go on our merry way.....
Ciao'
VIVA ITALIA'
GOD BLESS AMERICAN AND OUR TROOPS IN IRAQ/AFGHANISTAN AND ALL OVER THE
WORLD PROTECTING THE WORLD FROM TERRORISTS. GOD BLESS THE PUSSIES WHO PUT
DOWN AMERICA FOR DOING SO!!!
ROBB S
--
Message posted via http://www.carkb.com
comment. I understand the confusion with the thread and was even
appologetic to mike. At one point in a earlier thread I called bill a jeep
knowledge god and mike a close second. His knowledge and helpfulness was
not my complaint to him, and if you all can read, I addressed this to him
and not to you. My bitch was him calling my project an abortion. He also
came across at times as having an uppity attitude, guessing he's french
canadian. Aside from that, I decided to call him out. If he wants to call
my project an abortion, he can meet me on the street corner where I'll kick
his ***. I can tell the difference from good advice, bad advice and can
even take sarcasm. But I took extreme offense to his abortion comment.
Too bad he has to have others come out and fight his battles. I admit I
gave some incorrect details when I was asking questions through the thread,
but isn't that what this forum is about??? Learning??? Like I said in
previous quotes, the only "time a question is stupid is when you ask it a
third time to the same person". Too many people were answering my
questions after assuming details.. RE stands for Rubicon Extreme by the
way. Part of the problem was they were closed saturday afternoon and
sunday for tech support. The other problem was posting my thread on
saturday when all the drunks would be answering, and third... I confused
issues with some incorrect information on the steering, suspention
component labeling....and that was in part because I was stressed and
confused myself. I admitted that and even appologized to the group and
mike for that...
But I stand by my principle that I am EXTREMELY OFFENDED by mikes calling
my project an abortion. My response wasn't the most adult like, but I was
pissed off when I wrote it.
Probably should have followed my own advice, and allowed myself to cool
down before I slandered his mother and canada, and for that I will
applogize, but he still had a sarcastic uppity (french) attitude I was and
still am in no mood to tolerate. I have no idea if he is french canadian
or not, just slandering the french for the moment for no other reason than
they are french, and pussied out in iraq, and back stabbed the USA prior to
the war.
Mike still owes me an appology.....
and yes,,,I am a licensed elctrician, and do know HVAC. I'm also a
licensed plumber and hold certificates in boiler service and pressure
vessel manufacturing and pipefitting. I was in charge of all of the start
up of building equipment of the new/remodeled state capitol building in
washington state-USA. I do know and have many skills in many areas. I am
not an engineer, and don't know much about jeeps, but do know much about
4x4ing. Mike has been great with information. I wasn't pissed that he
didn't know my answers. He tried his best and so did everyone else to
understand my question. But he insulted me tremendously with his abortion
comment, and thats why I called him out. So, everyone, go back in your
house, and if he wants to meet me at the corner and duke it out, fine. If
not, I've said my peace and he's gotten the message that I'm pissed about
the comment and we can all go on our merry way.....
Ciao'
VIVA ITALIA'
GOD BLESS AMERICAN AND OUR TROOPS IN IRAQ/AFGHANISTAN AND ALL OVER THE
WORLD PROTECTING THE WORLD FROM TERRORISTS. GOD BLESS THE PUSSIES WHO PUT
DOWN AMERICA FOR DOING SO!!!
ROBB S
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
I didn't know I was on a debate team, defining the finer points of my cut.
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
I didn't know I was on a debate team, defining the finer points of my cut.
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
I didn't know I was on a debate team, defining the finer points of my cut.
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
I didn't know I was on a debate team, defining the finer points of my cut.
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Bottom line, I'm upset at his abortion comment. How's this?
"I don't know if abortion was legal or not in canada at the time you were
born, but I'm you should have been the result of one" I don't even know if
it was legal in the USA at the time he was born you J@ckass!
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
Hey Mike, F@ck You. You were wrong and a ----- to boot because you don't
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
Hey Mike, F@ck You. You were wrong and a ----- to boot because you don't
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
Hey Mike, F@ck You. You were wrong and a ----- to boot because you don't
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
Hey Mike, F@ck You. You were wrong and a ----- to boot because you don't
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
even have the backbone to apologize when your wrong, you must be French
canadian, can tell by the yellow stripe down your back
--
Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Hey Mike
Forwarded to: abuse@advenet.com
From:
"Robb S via CarKB.com" <forum@CarKB.com>
Subject:
Re: Hey Mike
Newsgroups:
rec.autos.makers.jeep+******
Date:
Fri, 06 May 2005 05:44:53 GMT
References:
<616d313e918f4bd0ade2de4773ba1f71@CarKB.com>
<uAoee.6116$VL3.608398@news20.bellglobal.com>
<f2113494d4c0487cb36715e40dfed0db@CarKB.com>
<3499bf44487f4f3390c681f488a27572@CarKB.com>
<427ABD51.44B7D998@sympatico.ca>
Organization:
http://www.CarKB.com
Message-ID:
<5c5a21e5d85248959fd5d19d1faeff43@CarKB.com>
X-Abuse-Report:
http://www.CarKB.com/Uwe/NB/Abuse.aspx
NNTP-Posting-Host:
216.32.72.34
X-Trace:
advenet.com 1115358293 216.32.72.34 (6 May 2005
01:44:53 -0400)
Lines:
6
Path:
news1.central.***.net!central.***.net!east.***.net !filt02.***.net!peer01.***.net!***.net!newsfeed.st ueberl.de!feed.news.tiscali.de!news.belwue.de!LF.n et!news.jgaa.com!advenet.com!not-for-mail
Xref:
***.net rec.autos.makers.jeep+******:545911
X-Received-Date:
Fri, 06 May 2005 01:44:55 EDT (news1.central.***.net)
From:
"Robb S via CarKB.com" <forum@CarKB.com>
Subject:
Re: Hey Mike
Newsgroups:
rec.autos.makers.jeep+******
Date:
Fri, 06 May 2005 05:44:53 GMT
References:
<616d313e918f4bd0ade2de4773ba1f71@CarKB.com>
<uAoee.6116$VL3.608398@news20.bellglobal.com>
<f2113494d4c0487cb36715e40dfed0db@CarKB.com>
<3499bf44487f4f3390c681f488a27572@CarKB.com>
<427ABD51.44B7D998@sympatico.ca>
Organization:
http://www.CarKB.com
Message-ID:
<5c5a21e5d85248959fd5d19d1faeff43@CarKB.com>
X-Abuse-Report:
http://www.CarKB.com/Uwe/NB/Abuse.aspx
NNTP-Posting-Host:
216.32.72.34
X-Trace:
advenet.com 1115358293 216.32.72.34 (6 May 2005
01:44:53 -0400)
Lines:
6
Path:
news1.central.***.net!central.***.net!east.***.net !filt02.***.net!peer01.***.net!***.net!newsfeed.st ueberl.de!feed.news.tiscali.de!news.belwue.de!LF.n et!news.jgaa.com!advenet.com!not-for-mail
Xref:
***.net rec.autos.makers.jeep+******:545911
X-Received-Date:
Fri, 06 May 2005 01:44:55 EDT (news1.central.***.net)
