Help with strange scraping sound
10-09-2006, 06:50 PM
#11
Guest
Posts: n/a
Re: Help with strange scraping sound
If that is the problem consider chaining the replacement.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
10-09-2006, 06:50 PM
#12
Guest
Posts: n/a
Re: Help with strange scraping sound
If that is the problem consider chaining the replacement.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
10-09-2006, 06:50 PM
#13
Guest
Posts: n/a
Re: Help with strange scraping sound
If that is the problem consider chaining the replacement.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:452A79EC.F823A42E@sympatico.ca...
>I would be checking out the drivers side engine mount. When it breaks
> the exhaust can hit the front axle when decelerating.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> nrs wrote:
>>
>> While off-roading this weekend the '95 Wrangler developed a slow
>> scraping sound that sounds like sheetmetal edges rubbing past each
>> other (low pitch). It happens only while going downhill and braking
>> with the engine. It happens in and out of 4WD and on paved and unpaved
>> roads. Nothing seems to be hanging on the driveshaft. It sounds like
>> it comes from the center of the Jeep but it is hard to pinpoint. I'm
>> suspecting something related to the clutch or transmission (can these
>> things make such a sound?). All shifting seems to be fine. Also the
>> noise does not happen when braking with the engine on the flat. Any
>> ideas are apreciated.
>>
>> Thanks
10-10-2006, 12:07 AM
#14
Guest
Posts: n/a
Re: Help with strange scraping sound
Not really a problem like with the pre seventies cars would fail:
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
10-10-2006, 12:07 AM
#15
Guest
Posts: n/a
Re: Help with strange scraping sound
Not really a problem like with the pre seventies cars would fail:
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
10-10-2006, 12:07 AM
#16
Guest
Posts: n/a
Re: Help with strange scraping sound
Not really a problem like with the pre seventies cars would fail:
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
reason drag strips require engine straps. The Jeep is held within a
ring, so it may only fall enough to start to hit on exhaust/driveshaft:
http://members.***.net/douglas.wilson/motormount/
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
billy ray wrote:
>
> If that is the problem consider chaining the replacement.
10-16-2006, 10:28 AM
#17
Guest
Posts: n/a
Re: Help with strange scraping sound
You all must be psychic! The driver's side mount looks bad. The
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
10-16-2006, 10:28 AM
#18
Guest
Posts: n/a
Re: Help with strange scraping sound
You all must be psychic! The driver's side mount looks bad. The
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
10-16-2006, 10:28 AM
#19
Guest
Posts: n/a
Re: Help with strange scraping sound
You all must be psychic! The driver's side mount looks bad. The
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
rubber that goes over the top of the center bolt is mostly gone. I
recently put in a torque reaction bolt in the transmission mount that
had been broken before I bought the jeep. Looks like this mount had
been taking on that role and wore out.
Thanks to all who replied.
L.W.(Bill) ------ III wrote:
> Not really a problem like with the pre seventies cars would fail:
> http://users.adelphia.net/~csudman/4...nt%20Broke.jpg and the
> reason drag strips require engine straps. The Jeep is held within a
> ring, so it may only fall enough to start to hit on exhaust/driveshaft:
> http://members.***.net/douglas.wilson/motormount/
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> billy ray wrote:
> >
> > If that is the problem consider chaining the replacement.
10-16-2006, 05:54 PM
#20
Guest
Posts: n/a
Re: Help with strange scraping sound
nrs wrote:
> You all must be psychic! The driver's side mount looks bad. The
> rubber that goes over the top of the center bolt is mostly gone. I
> recently put in a torque reaction bolt in the transmission mount that
> had been broken before I bought the jeep. Looks like this mount had
> been taking on that role and wore out.
Replace all three mounts at the same time, motor left/right and transmission. If you don't the motor will not sit correctly and
your drive angles will be off.
http://revbeergoggles.com/motormount/
The place I got my parts from is on that page.
I couldn't find aftermarket.
--
DougW
> You all must be psychic! The driver's side mount looks bad. The
> rubber that goes over the top of the center bolt is mostly gone. I
> recently put in a torque reaction bolt in the transmission mount that
> had been broken before I bought the jeep. Looks like this mount had
> been taking on that role and wore out.
Replace all three mounts at the same time, motor left/right and transmission. If you don't the motor will not sit correctly and
your drive angles will be off.
http://revbeergoggles.com/motormount/
The place I got my parts from is on that page.
I couldn't find aftermarket.
--
DougW
