Help me pick Gears
Guest
Posts: n/a
Help me pick Gears
Help me pick Gears
My CJ w/ 258 needs a new rear end.
I am going to take this time up upgrade, and only want to do it once. Lift is
nexst on my list But I am unsure how big. Cant decided between 33's and 35's.
What will probably happen is 33's for a cuple of years then 35's But I don't
want to have to re-gear when (and if) I go to 35's.
So if I knew all I would do is 33's I would go with 4.10, But if I ever go to
35's would need 4.56.
My questions:
Am I better off w/ 4.56's and 33's or 4.10's and 35's?
Any suggestions?
If use matters, it's a 5speed. I am doing to for deep mud and light rock
crawling, But I tend to drive this more then my Daly driver unless I am hoping
on the highway, or "need" AC. But I don't want to build this to where I can't
put it on the highway if I need it to.
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
My CJ w/ 258 needs a new rear end.
I am going to take this time up upgrade, and only want to do it once. Lift is
nexst on my list But I am unsure how big. Cant decided between 33's and 35's.
What will probably happen is 33's for a cuple of years then 35's But I don't
want to have to re-gear when (and if) I go to 35's.
So if I knew all I would do is 33's I would go with 4.10, But if I ever go to
35's would need 4.56.
My questions:
Am I better off w/ 4.56's and 33's or 4.10's and 35's?
Any suggestions?
If use matters, it's a 5speed. I am doing to for deep mud and light rock
crawling, But I tend to drive this more then my Daly driver unless I am hoping
on the highway, or "need" AC. But I don't want to build this to where I can't
put it on the highway if I need it to.
83 CJ 8, a work in progress
http://hometown.aol.com/ebmvi/MyTJindex.html
Take out the "XXX" to e-mail me
Guest
Posts: n/a
Re: Help me pick Gears
Hello Evan,
I just went through the same decision. I, too, have the 258 and a 5 speed.
I now have 33s but may one day go with 35s. I decided to go with the 4.56
and have no regrets.
Jim
--
'86 CJ-7
D30 D44 D300 T-5
ARB 4.56 Mopar MPI
Fresno, CA
http://home.comcast.net/~cj.7/ (new location)
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
I just went through the same decision. I, too, have the 258 and a 5 speed.
I now have 33s but may one day go with 35s. I decided to go with the 4.56
and have no regrets.
Jim
--
'86 CJ-7
D30 D44 D300 T-5
ARB 4.56 Mopar MPI
Fresno, CA
http://home.comcast.net/~cj.7/ (new location)
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
Guest
Posts: n/a
Re: Help me pick Gears
What rpm do you turn on the highway say at 65 mph with that setup?
I might be in need of a new rear end before too long and am curious.
I am turning about 2300 in 4th right now with 3.31's.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jim Meyer wrote:
>
> Hello Evan,
>
> I just went through the same decision. I, too, have the 258 and a 5 speed.
> I now have 33s but may one day go with 35s. I decided to go with the 4.56
> and have no regrets.
>
> Jim
>
> --
> '86 CJ-7
> D30 D44 D300 T-5
> ARB 4.56 Mopar MPI
> Fresno, CA
> http://home.comcast.net/~cj.7/ (new location)
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20030705140552.27609.00000199@mb-m25.aol.com...
> > Help me pick Gears
> >
> > My CJ w/ 258 needs a new rear end.
> >
> > I am going to take this time up upgrade, and only want to do it once.
> Lift is
> > nexst on my list But I am unsure how big. Cant decided between 33's and
> 35's.
> > What will probably happen is 33's for a cuple of years then 35's But I
> don't
> > want to have to re-gear when (and if) I go to 35's.
> >
> > So if I knew all I would do is 33's I would go with 4.10, But if I ever
> go to
> > 35's would need 4.56.
> >
> > My questions:
> >
> > Am I better off w/ 4.56's and 33's or 4.10's and 35's?
> >
> > Any suggestions?
> >
> > If use matters, it's a 5speed. I am doing to for deep mud and light rock
> > crawling, But I tend to drive this more then my Daly driver unless I am
> hoping
> > on the highway, or "need" AC. But I don't want to build this to where I
> can't
> > put it on the highway if I need it to.
I might be in need of a new rear end before too long and am curious.
I am turning about 2300 in 4th right now with 3.31's.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jim Meyer wrote:
>
> Hello Evan,
>
> I just went through the same decision. I, too, have the 258 and a 5 speed.
> I now have 33s but may one day go with 35s. I decided to go with the 4.56
> and have no regrets.
>
> Jim
>
> --
> '86 CJ-7
> D30 D44 D300 T-5
> ARB 4.56 Mopar MPI
> Fresno, CA
> http://home.comcast.net/~cj.7/ (new location)
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20030705140552.27609.00000199@mb-m25.aol.com...
> > Help me pick Gears
> >
> > My CJ w/ 258 needs a new rear end.
> >
> > I am going to take this time up upgrade, and only want to do it once.
> Lift is
> > nexst on my list But I am unsure how big. Cant decided between 33's and
> 35's.
> > What will probably happen is 33's for a cuple of years then 35's But I
> don't
> > want to have to re-gear when (and if) I go to 35's.
> >
> > So if I knew all I would do is 33's I would go with 4.10, But if I ever
> go to
> > 35's would need 4.56.
> >
> > My questions:
> >
> > Am I better off w/ 4.56's and 33's or 4.10's and 35's?
> >
> > Any suggestions?
> >
> > If use matters, it's a 5speed. I am doing to for deep mud and light rock
> > crawling, But I tend to drive this more then my Daly driver unless I am
> hoping
> > on the highway, or "need" AC. But I don't want to build this to where I
> can't
> > put it on the highway if I need it to.
Guest
Posts: n/a
Re: Help me pick Gears
Having installed 4.10 for 33" tires several years ago, I knew within a week
or two I should have installed 4.56 instead. 4.10 is ok if all you want to
do is cruise the streets but 4.56 is even better for that. For offroad,
4.10 is too high of a ratio and 4.56 is a far better ratio.
When I went to 35" tires, I jumped to 4.88 with no regrets... 35" tires and
4.88 is a superb all-around ratio for a 5-speed equipped Jeep. 4.56 would
be "ok" for 35" but it's the same deal with 4.10 with 33" tires... both are
too low of a ratio, the next lower ratio raises your engine rpms just enough
to make driving a pleasure instead of a constant 'downshifting' battle. I'd
go for 4.56 for 33" tires if I were doing it again, that is for sure.
Jerry
--
Jerry Bransford
KC6TAY, PP-ASEL
The Zen Hotdog, make me one with everything!
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
>
or two I should have installed 4.56 instead. 4.10 is ok if all you want to
do is cruise the streets but 4.56 is even better for that. For offroad,
4.10 is too high of a ratio and 4.56 is a far better ratio.
When I went to 35" tires, I jumped to 4.88 with no regrets... 35" tires and
4.88 is a superb all-around ratio for a 5-speed equipped Jeep. 4.56 would
be "ok" for 35" but it's the same deal with 4.10 with 33" tires... both are
too low of a ratio, the next lower ratio raises your engine rpms just enough
to make driving a pleasure instead of a constant 'downshifting' battle. I'd
go for 4.56 for 33" tires if I were doing it again, that is for sure.
Jerry
--
Jerry Bransford
KC6TAY, PP-ASEL
The Zen Hotdog, make me one with everything!
See the Geezer Jeep at
http://members.***.net/jerrypb/
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
>
Guest
Posts: n/a
Re: Help me pick Gears
http://www.dirtroad.com/gears.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> What rpm do you turn on the highway say at 65 mph with that setup?
>
> I might be in need of a new rear end before too long and am curious.
>
> I am turning about 2300 in 4th right now with 3.31's.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Mike Romain wrote:
>
> What rpm do you turn on the highway say at 65 mph with that setup?
>
> I might be in need of a new rear end before too long and am curious.
>
> I am turning about 2300 in 4th right now with 3.31's.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
Guest
Posts: n/a
Re: Help me pick Gears
5.38s
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Evan wrote:
>
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once. Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and 35's.
> What will probably happen is 33's for a cuple of years then 35's But I don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am hoping
> on the highway, or "need" AC. But I don't want to build this to where I can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Evan wrote:
>
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once. Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and 35's.
> What will probably happen is 33's for a cuple of years then 35's But I don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am hoping
> on the highway, or "need" AC. But I don't want to build this to where I can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
Guest
Posts: n/a
Re: Help me pick Gears
Yeah, my wife's FJ-40 has something like that, and it doesn't even have over
drive!
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F07417D.BFB5A029@***.net...
> 5.38s
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Evan wrote:
> >
> > Help me pick Gears
> >
> > My CJ w/ 258 needs a new rear end.
> >
> > I am going to take this time up upgrade, and only want to do it once.
Lift is
> > nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> > What will probably happen is 33's for a cuple of years then 35's But I
don't
> > want to have to re-gear when (and if) I go to 35's.
> >
> > So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> > 35's would need 4.56.
> >
> > My questions:
> >
> > Am I better off w/ 4.56's and 33's or 4.10's and 35's?
> >
> > Any suggestions?
> >
> > If use matters, it's a 5speed. I am doing to for deep mud and light
rock
> > crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> > on the highway, or "need" AC. But I don't want to build this to where I
can't
> > put it on the highway if I need it to.
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
drive!
Earle
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3F07417D.BFB5A029@***.net...
> 5.38s
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Evan wrote:
> >
> > Help me pick Gears
> >
> > My CJ w/ 258 needs a new rear end.
> >
> > I am going to take this time up upgrade, and only want to do it once.
Lift is
> > nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> > What will probably happen is 33's for a cuple of years then 35's But I
don't
> > want to have to re-gear when (and if) I go to 35's.
> >
> > So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> > 35's would need 4.56.
> >
> > My questions:
> >
> > Am I better off w/ 4.56's and 33's or 4.10's and 35's?
> >
> > Any suggestions?
> >
> > If use matters, it's a 5speed. I am doing to for deep mud and light
rock
> > crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> > on the highway, or "need" AC. But I don't want to build this to where I
can't
> > put it on the highway if I need it to.
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
Guest
Posts: n/a
Re: Help me pick Gears
My preference is the lower gearing - I'm running 5.13s with 35s and have no
complaints. The 4.0L (and 258) responds well with this combination. Last
time I checked, in 5th she pushes around 2500rpms @ 65-70mph. In a modified
SWB Jeep, I have no desire to go much faster than that anyway. I chose the
5.13s because it gives the flexibility of stepping up to 37s or larger (I
almost went with the 5.38s).
What most agree upon:
4.10 - 4.88 for 33s
4.56 - 5.13 for 35s
4.88 - 5.38 for 37s
Terry.
92YJ
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
>
complaints. The 4.0L (and 258) responds well with this combination. Last
time I checked, in 5th she pushes around 2500rpms @ 65-70mph. In a modified
SWB Jeep, I have no desire to go much faster than that anyway. I chose the
5.13s because it gives the flexibility of stepping up to 37s or larger (I
almost went with the 5.38s).
What most agree upon:
4.10 - 4.88 for 33s
4.56 - 5.13 for 35s
4.88 - 5.38 for 37s
Terry.
92YJ
"Evan" <ebmvi@aol.comxxx> wrote in message
news:20030705140552.27609.00000199@mb-m25.aol.com...
> Help me pick Gears
>
> My CJ w/ 258 needs a new rear end.
>
> I am going to take this time up upgrade, and only want to do it once.
Lift is
> nexst on my list But I am unsure how big. Cant decided between 33's and
35's.
> What will probably happen is 33's for a cuple of years then 35's But I
don't
> want to have to re-gear when (and if) I go to 35's.
>
> So if I knew all I would do is 33's I would go with 4.10, But if I ever
go to
> 35's would need 4.56.
>
> My questions:
>
> Am I better off w/ 4.56's and 33's or 4.10's and 35's?
>
> Any suggestions?
>
> If use matters, it's a 5speed. I am doing to for deep mud and light rock
> crawling, But I tend to drive this more then my Daly driver unless I am
hoping
> on the highway, or "need" AC. But I don't want to build this to where I
can't
> put it on the highway if I need it to.
>
> 83 CJ 8, a work in progress
> http://hometown.aol.com/ebmvi/MyTJindex.html
> Take out the "XXX" to e-mail me
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
