Help finding a stock radio antenna for CJ
11-10-2003, 12:06 PM
#2
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
My stock one actually has 4 holes. One for the wire and three for the
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
11-10-2003, 12:06 PM
#3
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
My stock one actually has 4 holes. One for the wire and three for the
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
11-10-2003, 12:06 PM
#4
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
My stock one actually has 4 holes. One for the wire and three for the
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
screws/bolts that hold it on.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
cspud wrote:
>
> I recently purchased an '86 CJ that has the antenna base but not the
> mast. Does anyone know who sells them? Located some aftermarkets that
> require 3 hole drilled. I would rather use the stock hole. Thanks!
11-10-2003, 08:57 PM
#5
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
there are two types used, one is the more common upsidedown triangle shaped
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
11-10-2003, 08:57 PM
#6
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
there are two types used, one is the more common upsidedown triangle shaped
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
11-10-2003, 08:57 PM
#7
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
there are two types used, one is the more common upsidedown triangle shaped
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
based (3 mounting screws) and the other is one larger hole with a ball socket
shaped mount. It has a large ring/nut that tightens from the inside (near the
air box). The first one is easy to find as an aftermarket replacement (looks
the same)
11-11-2003, 07:48 AM
#8
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
onlyinajeepcj7@aol.com (Onlyinajeepcj7) wrote in
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
11-11-2003, 07:48 AM
#9
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
onlyinajeepcj7@aol.com (Onlyinajeepcj7) wrote in
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
11-11-2003, 07:48 AM
#10
Guest
Posts: n/a
Re: Help finding a stock radio antenna for CJ
onlyinajeepcj7@aol.com (Onlyinajeepcj7) wrote in
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
news:20031110205710.26644.00000471@mb-m28.aol.com:
> there are two types used, one is the more common upsidedown triangle
> shaped based (3 mounting screws) and the other is one larger hole with
> a ball socket shaped mount. It has a large ring/nut that tightens from
> the inside (near the air box). The first one is easy to find as an
> aftermarket replacement (looks the same)
Mine is the latter. It tightens by a phillips from the outside. It
basically looks like 2 circles - one vertical (attaching through the body)
and one horizontal (with a threaded section in the center for the mast). I
am having no luck locating even just the mast. Any help would be
appreciated.
