Help, engine misses randomly
02-23-2006, 04:50 AM
#31
Guest
Posts: n/a
Re: Help, engine misses randomly
In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
02-23-2006, 04:50 AM
#32
Guest
Posts: n/a
Re: Help, engine misses randomly
In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
02-23-2006, 04:50 AM
#33
Guest
Posts: n/a
Re: Help, engine misses randomly
In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
RoyJ <spamless@microsoft.net> wrote:
#What Mike said. Anyone with the 4.2 knows how to change out the
#$$##@@!## valve cover seal. Sometime next week you will be asking if you
#should use the cork gasket or seal it down with RTV. :)
If you ever get your 4.2 replaced, order a engine with a head that
takes the metal valve cover instead of the plastic one that warps
and spews oil. RTV worked just fine for my metal valve cover...
/herb
02-23-2006, 09:19 AM
#34
Guest
Posts: n/a
Re: Help, engine misses randomly
Herb Leong wrote:
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
02-23-2006, 09:19 AM
#35
Guest
Posts: n/a
Re: Help, engine misses randomly
Herb Leong wrote:
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
02-23-2006, 09:19 AM
#36
Guest
Posts: n/a
Re: Help, engine misses randomly
Herb Leong wrote:
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
02-23-2006, 09:19 AM
#37
Guest
Posts: n/a
Re: Help, engine misses randomly
Herb Leong wrote:
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
>
> In article <yMaLf.4509$UN.140@newsread2.news.pas.earthlink.ne t>,
> RoyJ <spamless@microsoft.net> wrote:
> #What Mike said. Anyone with the 4.2 knows how to change out the
> #$$##@@!## valve cover seal. Sometime next week you will be asking if you
> #should use the cork gasket or seal it down with RTV. :)
>
> If you ever get your 4.2 replaced, order a engine with a head that
> takes the metal valve cover instead of the plastic one that warps
> and spews oil. RTV worked just fine for my metal valve cover...
>
> /herb
The older heads can be drilled and tapped for the bolts to hold on the
metal cover. The YJ's came that way and the later CJ's.
I am running a head with no bolt holes in it now. The cover is only
held on by two nuts on rocker bridges up top and a 'really' cleaned
surface with a skim of RTV and cork sandwich. After 5 years it is just
starting to seep oil, no drips yet.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
02-23-2006, 03:28 PM
#38
Guest
Posts: n/a
Re: Help, engine misses randomly
Yup, just the same as these 1926 Nashs:
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
02-23-2006, 03:28 PM
#39
Guest
Posts: n/a
Re: Help, engine misses randomly
Yup, just the same as these 1926 Nashs:
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
02-23-2006, 03:28 PM
#40
Guest
Posts: n/a
Re: Help, engine misses randomly
Yup, just the same as these 1926 Nashs:
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
http://www.----------.com/temp/26nash.jpg
http://www.----------.com/temp/26nash2.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
Mike Romain wrote:
>
> The older heads can be drilled and tapped for the bolts to hold on the
> metal cover. The YJ's came that way and the later CJ's.
>
> I am running a head with no bolt holes in it now. The cover is only
> held on by two nuts on rocker bridges up top and a 'really' cleaned
> surface with a skim of RTV and cork sandwich. After 5 years it is just
> starting to seep oil, no drips yet.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
