Help Changing Starter
Guest
Posts: n/a
Re: Help Changing Starter
On or about Thu, 28 Aug 2003, Kyonn Gowans of kyonn@yahoo.com wrote:
> I recently tried to change the starter in my 1989 Cherokee 4.0L but I got
> stuck when it came to removing the rear mounting bolt, the bolt is in a
> really tight spot and I found it really hard to get a ratchet up in there or
> even see what I was doing. Anybody know what size bolt it is or what tool
> would be best for the job or just have any general information/advice about
> removing the starter. Thanks in advance.
I changed my `89 Cherokee's starter out just this past Saturday. Yes, the
rear bolt is in a tight spot. Break it loose with a box wrench and get a
3/8" "wobble" extension for your ratchet wrench to put the ratchet head in
a place that you can swing it. One bolt is English/American, the other is
metric. Gotta love it.
There's only two wires, a control lead and the battery cable. When you
put the new starter in, pay particular attention to which bolt the battery
cable went to. Laying on your back in the driveway it will be easy to
confuse the two and attach it to the wrong bolt. This will be Very Bad.
You'll know by the huge spark when you try to put the battery cable back
on the battery post if you've got it wrong.
> I recently tried to change the starter in my 1989 Cherokee 4.0L but I got
> stuck when it came to removing the rear mounting bolt, the bolt is in a
> really tight spot and I found it really hard to get a ratchet up in there or
> even see what I was doing. Anybody know what size bolt it is or what tool
> would be best for the job or just have any general information/advice about
> removing the starter. Thanks in advance.
I changed my `89 Cherokee's starter out just this past Saturday. Yes, the
rear bolt is in a tight spot. Break it loose with a box wrench and get a
3/8" "wobble" extension for your ratchet wrench to put the ratchet head in
a place that you can swing it. One bolt is English/American, the other is
metric. Gotta love it.
There's only two wires, a control lead and the battery cable. When you
put the new starter in, pay particular attention to which bolt the battery
cable went to. Laying on your back in the driveway it will be easy to
confuse the two and attach it to the wrong bolt. This will be Very Bad.
You'll know by the huge spark when you try to put the battery cable back
on the battery post if you've got it wrong.
Guest
Posts: n/a
Re: Help Changing Starter
In article <1062132236.334862@prawn>, Kyonn Gowans <kyonn@yahoo.com> wrote:
>> Every bolt on my 88 is metric (so far) but something is screwy there.
>
>Funny 'cause every bolt in my '89 is standard. I finally got it off (it was
>a 5/8). Thanks for all your help.
I bought a 94 YJ a month ago and I noticed it has SAE and Metric hardware.
If you work on say the Japanese equipment like the AX15 for example, you
get metric. Besides Torx, it sure is strange have both SAE and Metric on
one vehicle.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
>> Every bolt on my 88 is metric (so far) but something is screwy there.
>
>Funny 'cause every bolt in my '89 is standard. I finally got it off (it was
>a 5/8). Thanks for all your help.
I bought a 94 YJ a month ago and I noticed it has SAE and Metric hardware.
If you work on say the Japanese equipment like the AX15 for example, you
get metric. Besides Torx, it sure is strange have both SAE and Metric on
one vehicle.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
Guest
Posts: n/a
Re: Help Changing Starter
In article <1062132236.334862@prawn>, Kyonn Gowans <kyonn@yahoo.com> wrote:
>> Every bolt on my 88 is metric (so far) but something is screwy there.
>
>Funny 'cause every bolt in my '89 is standard. I finally got it off (it was
>a 5/8). Thanks for all your help.
I bought a 94 YJ a month ago and I noticed it has SAE and Metric hardware.
If you work on say the Japanese equipment like the AX15 for example, you
get metric. Besides Torx, it sure is strange have both SAE and Metric on
one vehicle.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
>> Every bolt on my 88 is metric (so far) but something is screwy there.
>
>Funny 'cause every bolt in my '89 is standard. I finally got it off (it was
>a 5/8). Thanks for all your help.
I bought a 94 YJ a month ago and I noticed it has SAE and Metric hardware.
If you work on say the Japanese equipment like the AX15 for example, you
get metric. Besides Torx, it sure is strange have both SAE and Metric on
one vehicle.
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
39
Jan 26, 2004 11:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
