Help! Can't unscrew 2001 JGC 4.0L oil filler plug!
Guest
Posts: n/a
Thanks, XJ! nt
--
---AVG Certified Virus-Free---
<98XJ> wrote in message news:kr0l93lea384f2obf3pojuhi3j82nj1gqe@4ax.com...
> On Sun, 15 Jul 2007 11:55:04 -0700, "tom" <tom@hotmail.com> wrote:
>
>>
>>It just "ratchets" in both directions. It won't "catch" when un-screwing
>>(counterclockwise). Any help appreciated! Thanks all.
>
>
> My 4.0's filler cap did that when I first got the Jeep (used). I
> found that the cap is made from two pieces of plastic that are snapped
> together.
>
> The first few times that I changed the oil, I had the same problem as
> you. Expecting to have to buy a new cap, I twisted the cap so much
> that the top piece popped off (you could pry it off without much
> effort). Then, using a wide-bladed screwdriver, I pushed against the
> "ratchet fins" to back-off the actual (inner/lower) cap. Afterwards,
> I snapped the two pieces back together. As I said ths happened for
> the first few oil changes - then it just healed itself.
>
> Jim
> '98 XJ
Guest
Posts: n/a
Thanks, XJ! nt
--
---AVG Certified Virus-Free---
<98XJ> wrote in message news:kr0l93lea384f2obf3pojuhi3j82nj1gqe@4ax.com...
> On Sun, 15 Jul 2007 11:55:04 -0700, "tom" <tom@hotmail.com> wrote:
>
>>
>>It just "ratchets" in both directions. It won't "catch" when un-screwing
>>(counterclockwise). Any help appreciated! Thanks all.
>
>
> My 4.0's filler cap did that when I first got the Jeep (used). I
> found that the cap is made from two pieces of plastic that are snapped
> together.
>
> The first few times that I changed the oil, I had the same problem as
> you. Expecting to have to buy a new cap, I twisted the cap so much
> that the top piece popped off (you could pry it off without much
> effort). Then, using a wide-bladed screwdriver, I pushed against the
> "ratchet fins" to back-off the actual (inner/lower) cap. Afterwards,
> I snapped the two pieces back together. As I said ths happened for
> the first few oil changes - then it just healed itself.
>
> Jim
> '98 XJ
Guest
Posts: n/a
Thanks, XJ! nt
--
---AVG Certified Virus-Free---
<98XJ> wrote in message news:kr0l93lea384f2obf3pojuhi3j82nj1gqe@4ax.com...
> On Sun, 15 Jul 2007 11:55:04 -0700, "tom" <tom@hotmail.com> wrote:
>
>>
>>It just "ratchets" in both directions. It won't "catch" when un-screwing
>>(counterclockwise). Any help appreciated! Thanks all.
>
>
> My 4.0's filler cap did that when I first got the Jeep (used). I
> found that the cap is made from two pieces of plastic that are snapped
> together.
>
> The first few times that I changed the oil, I had the same problem as
> you. Expecting to have to buy a new cap, I twisted the cap so much
> that the top piece popped off (you could pry it off without much
> effort). Then, using a wide-bladed screwdriver, I pushed against the
> "ratchet fins" to back-off the actual (inner/lower) cap. Afterwards,
> I snapped the two pieces back together. As I said ths happened for
> the first few oil changes - then it just healed itself.
>
> Jim
> '98 XJ
Thread
Thread Starter
Forum
Replies
Last Post
Jeepers
Jeep Mailing List
2
Aug 22, 2003 12:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)