Help: 97 TJ Wrangler A/C / Heater Blower Problem
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
epetrill wrote:
> Good Morning,
>
> I am trying to narrow down what may be wrong with my A/C /Heater
> Blower.
> The problem first started with just the high setting not working. All
> other settings were fine but when on the highest setting it would stop
> blowing. IT's like it would just cut off. I could still feel the warm
> or cold air trickling out but no blowing, back to the first 3 settings
> and all was well.
>
> Now all of a sudden none of the settings are working. The compressor
> kicks on and cool air trickles out but the blower won't kick on.
>
> I tried the relay behind the glove box that did not work. I just order
> the resistor that is by the pass. floorboard but it won't be here for
> a few days.
>
> Is there anything I can check to see if the motor itself is bad or
> could it be something else that I need to change / check.
> Thanks for any advice / help!
http://jeephorizons.com/phpbb/viewtopic.php?t=3144
Common problem it seems.
Checked the fuses?
Easiest way to check the motor is hook it up to 12V or drop it out
and see how easily the cage moves. Sometimes bits of the rubber
seals gets into the fan and causes so much of a pull it blows the
resistor pack.
--
DougW
> Good Morning,
>
> I am trying to narrow down what may be wrong with my A/C /Heater
> Blower.
> The problem first started with just the high setting not working. All
> other settings were fine but when on the highest setting it would stop
> blowing. IT's like it would just cut off. I could still feel the warm
> or cold air trickling out but no blowing, back to the first 3 settings
> and all was well.
>
> Now all of a sudden none of the settings are working. The compressor
> kicks on and cool air trickles out but the blower won't kick on.
>
> I tried the relay behind the glove box that did not work. I just order
> the resistor that is by the pass. floorboard but it won't be here for
> a few days.
>
> Is there anything I can check to see if the motor itself is bad or
> could it be something else that I need to change / check.
> Thanks for any advice / help!
http://jeephorizons.com/phpbb/viewtopic.php?t=3144
Common problem it seems.
Checked the fuses?
Easiest way to check the motor is hook it up to 12V or drop it out
and see how easily the cage moves. Sometimes bits of the rubber
seals gets into the fan and causes so much of a pull it blows the
resistor pack.
--
DougW
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
On Jul 9, 5:59 pm, "DougW" <post.repl...@invalid.address> wrote:
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
On Jul 9, 5:59 pm, "DougW" <post.repl...@invalid.address> wrote:
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
On Jul 9, 5:59 pm, "DougW" <post.repl...@invalid.address> wrote:
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
On Jul 9, 5:59 pm, "DougW" <post.repl...@invalid.address> wrote:
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
> epetrill wrote:
> > Good Morning,
>
> > I am trying to narrow down what may be wrong with my A/C /Heater
> > Blower.
> > The problem first started with just the high setting not working. All
> > other settings were fine but when on the highest setting it would stop
> > blowing. IT's like it would just cut off. I could still feel the warm
> > or cold air trickling out but no blowing, back to the first 3 settings
> > and all was well.
>
> > Now all of a sudden none of the settings are working. The compressor
> > kicks on and cool air trickles out but the blower won't kick on.
>
> > I tried the relay behind the glove box that did not work. I just order
> > the resistor that is by the pass. floorboard but it won't be here for
> > a few days.
>
> > Is there anything I can check to see if the motor itself is bad or
> > could it be something else that I need to change / check.
> > Thanks for any advice / help!
>
> http://jeephorizons.com/phpbb/viewtopic.php?t=3144
> Common problem it seems.
>
> Checked the fuses?
>
> Easiest way to check the motor is hook it up to 12V or drop it out
> and see how easily the cage moves. Sometimes bits of the rubber
> seals gets into the fan and causes so much of a pull it blows the
> resistor pack.
>
> --
> DougW
Thanks for all the help!! The new resistor I bought off ebay fixed
part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
Which is great..!!!!!!
But 4 the highest level still does not work.? Strange ....
When I turn the level **** up to 4 everything just cuts off? Does
anyone know what I might need to do to resolve this?
Thanks Again!
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
That is the direct connect relay in the Power Distribution Center box by
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
That is the direct connect relay in the Power Distribution Center box by
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
That is the direct connect relay in the Power Distribution Center box by
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
That is the direct connect relay in the Power Distribution Center box by
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
your battery, under the hood: http://www.----------.com/resistor.htm
God Bless America, Bill O|||||||O
mailto:--------------------
<spetrill@gmail.com> wrote in message
news:1184295108.731382.199720@n2g2000hse.googlegro ups.com...
>
> Thanks for all the help!! The new resistor I bought off ebay fixed
> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
> Which is great..!!!!!!
>
> But 4 the highest level still does not work.? Strange ....
> When I turn the level **** up to 4 everything just cuts off? Does
> anyone know what I might need to do to resolve this?
>
> Thanks Again!
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Guest
Posts: n/a
Re: 97 TJ Wrangler A/C / Heater Blower Problem
On Thu, 12 Jul 2007 20:28:30 -0700, "L.W. \(Bill\) ------ III"
<LWBill------@------.net> wrote:
> That is the direct connect relay in the Power Distribution Center box by
>your battery, under the hood: http://www.----------.com/resistor.htm
> God Bless America, Bill O|||||||O
>mailto:--------------------
>
>
><spetrill@gmail.com> wrote in message
>news:1184295108.731382.199720@n2g2000hse.googlegr oups.com...
>>
>> Thanks for all the help!! The new resistor I bought off ebay fixed
>> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
>> Which is great..!!!!!!
>>
>> But 4 the highest level still does not work.? Strange ....
>> When I turn the level **** up to 4 everything just cuts off? Does
>> anyone know what I might need to do to resolve this?
>>
>> Thanks Again!
>>
>>
<LWBill------@------.net> wrote:
> That is the direct connect relay in the Power Distribution Center box by
>your battery, under the hood: http://www.----------.com/resistor.htm
> God Bless America, Bill O|||||||O
>mailto:--------------------
>
>
><spetrill@gmail.com> wrote in message
>news:1184295108.731382.199720@n2g2000hse.googlegr oups.com...
>>
>> Thanks for all the help!! The new resistor I bought off ebay fixed
>> part of it!!!!! Now I have A/C on 1 2 and 3 on the ****/dial ....
>> Which is great..!!!!!!
>>
>> But 4 the highest level still does not work.? Strange ....
>> When I turn the level **** up to 4 everything just cuts off? Does
>> anyone know what I might need to do to resolve this?
>>
>> Thanks Again!
>>
>>
