help '87 cherokee brakes
Guest
Posts: n/a
Re: help '87 cherokee brakes
Thanks for the follow up.
That is an unusual one for sure.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
RANDALL HAMILTON wrote:
>
> Problem found, a piece of the old master cylinder found it's way into the
> proportioning valve and was blocking the line. Of course I started
> disassembling from the calipers and worked my way almost to the new master
> before I found it. It's funny this didn't happen when I flushed the system
> before I decided to replace the master. Any chance that the problem was with
> the new unit even after bench bleeding it? In any case a big THANK YOU to
> everyone for the help.RLH
> "RANDALL HAMILTON" <RLHAMILTON@PRODIGY.NET> wrote in message
> news:XlGJe.240$Zh2.68@newssvr17.news.prodigy.com.. .
> >I did a front break job on my 1987 jeep Cherokee and now I can't get any
> >fluid to my passenger side caliper. What the heck is happening?
> >
> >
That is an unusual one for sure.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
RANDALL HAMILTON wrote:
>
> Problem found, a piece of the old master cylinder found it's way into the
> proportioning valve and was blocking the line. Of course I started
> disassembling from the calipers and worked my way almost to the new master
> before I found it. It's funny this didn't happen when I flushed the system
> before I decided to replace the master. Any chance that the problem was with
> the new unit even after bench bleeding it? In any case a big THANK YOU to
> everyone for the help.RLH
> "RANDALL HAMILTON" <RLHAMILTON@PRODIGY.NET> wrote in message
> news:XlGJe.240$Zh2.68@newssvr17.news.prodigy.com.. .
> >I did a front break job on my 1987 jeep Cherokee and now I can't get any
> >fluid to my passenger side caliper. What the heck is happening?
> >
> >
Thread
Thread Starter
Forum
Replies
Last Post
snowboardripper@hotmail.com
Jeep Mailing List
33
Jan 5, 2005 09:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)