Heat shield necessary?
#41
Guest
Posts: n/a
Re: Heat shield necessary?
L.W. (ßill) ------ III did pass the time by typing:
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
And the value of a good pair of jeans cause you only do that
_once_ wearing shorts.
--
DougW
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
And the value of a good pair of jeans cause you only do that
_once_ wearing shorts.
--
DougW
#42
Guest
Posts: n/a
Re: Heat shield necessary?
Have you ever bought an aftermarket muffler that didn't have a welded on
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
#43
Guest
Posts: n/a
Re: Heat shield necessary?
Have you ever bought an aftermarket muffler that didn't have a welded on
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
#44
Guest
Posts: n/a
Re: Heat shield necessary?
Have you ever bought an aftermarket muffler that didn't have a welded on
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
#45
Guest
Posts: n/a
Re: Heat shield necessary?
Have you ever bought an aftermarket muffler that didn't have a welded on
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
shield like the stock one does? I'm looking at a few options (Dynomax,
Pacesetter, etc), but none have built in shields. In theory, they would
have the same problems as my muffler with the shield removed...
Eric
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40B93F1F.FC8A7B8C@***.net...
> All you have to do step out of this Vette once and you'll know
> exact the worth of those muffler shields are:
> http://www.cardomain.com/memberpage/578942
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Eric wrote:
> >
> > That was my thought exactly. Aftermarket mufflers don't have heat
> > shields...
> >
> > The cat is perfectly intact. Just got a brand new one installed by the
> > dealer for FREE. :-)
> >
> > Eric
> > 99 TJ SE
#46
Guest
Posts: n/a
Re: Heat shield necessary?
Ok, that's for hot foot, no worries.
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
#47
Guest
Posts: n/a
Re: Heat shield necessary?
Ok, that's for hot foot, no worries.
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
#48
Guest
Posts: n/a
Re: Heat shield necessary?
Ok, that's for hot foot, no worries.
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
#49
Guest
Posts: n/a
Re: Heat shield necessary?
Ok, that's for hot foot, no worries.
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
The aftermarket parts are likely better quality so don't throw so much
heat off. Just a guess.
if it was structurally or safety wise needed, they all would have the
shield.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> Have you ever bought an aftermarket muffler that didn't have a welded on
> shield like the stock one does? I'm looking at a few options (Dynomax,
> Pacesetter, etc), but none have built in shields. In theory, they would
> have the same problems as my muffler with the shield removed...
>
> Eric
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40B93F1F.FC8A7B8C@***.net...
> > All you have to do step out of this Vette once and you'll know
> > exact the worth of those muffler shields are:
> > http://www.cardomain.com/memberpage/578942
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Eric wrote:
> > >
> > > That was my thought exactly. Aftermarket mufflers don't have heat
> > > shields...
> > >
> > > The cat is perfectly intact. Just got a brand new one installed by the
> > > dealer for FREE. :-)
> > >
> > > Eric
> > > 99 TJ SE
#50
Guest
Posts: n/a
Re: Heat shield necessary?
Mike Romain did pass the time by typing:
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW
> Ok, that's for hot foot, no worries.
>
> The aftermarket parts are likely better quality so don't throw so much
> heat off. Just a guess.
That is my impression. The stock ZJ muffler was made of some thin metal
but the Gibson you could probably run over without creating a dent.
> if it was structurally or safety wise needed, they all would have the
> shield.
One would hope so. :)
--
DougW