Cherokee-LTD

"CRWLR" <beerman@yahoo.com> wrote in message
news:10a2rc93609cs86@corp.supernews.com...
: You can buy brand spanking new connectors at your local Parts Store. Go in
: and look for the Help brand section of the store. There is tons of stuff
: that Help packages up. You simply will hack the old headlamp connector off
: and put the new one on, matching the colors as you go.
:

I'm pretty sure he is talking about the connector in the harness about 8"
behind the left headlight... it allows you to disconnect the header panel
from the rest of the body. I don't think Help brands get that specific with
connectors. If it was the actual headlight connector you'd bang on with your
suggestion.

-Brian

Cherokee-LTD

"JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
: Well, looks like that's tomorrow's project then. I start work on Sunday,
: night shifts. Would kind of suck having to strap maglights to the
: mirrors for the drive.
:
That's a bitch of a place to work on... I can hardly get my hand down there
to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
-Brian

Cherokee-LTD

"JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
: Well, looks like that's tomorrow's project then. I start work on Sunday,
: night shifts. Would kind of suck having to strap maglights to the
: mirrors for the drive.
:
That's a bitch of a place to work on... I can hardly get my hand down there
to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
-Brian

Cherokee-LTD

"JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
: Well, looks like that's tomorrow's project then. I start work on Sunday,
: night shifts. Would kind of suck having to strap maglights to the
: mirrors for the drive.
:
That's a bitch of a place to work on... I can hardly get my hand down there
to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
-Brian

Cherokee-LTD

"JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
: Well, looks like that's tomorrow's project then. I start work on Sunday,
: night shifts. Would kind of suck having to strap maglights to the
: mirrors for the drive.
:
That's a bitch of a place to work on... I can hardly get my hand down there
to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
-Brian

JeffD.

In article
<lbioc.48152$n7P1.875@twister01.bloor.is.net.cable .rogers.com>,
"Cherokee-LTD" <spammenot@home.com> wrote:

> "JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
> news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
> : Well, looks like that's tomorrow's project then. I start work on Sunday,
> : night shifts. Would kind of suck having to strap maglights to the
> : mirrors for the drive.
> :
> That's a bitch of a place to work on... I can hardly get my hand down there
> to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
> -Brian
>
>
Yeah, I'm not looking forward to it. I already took most everything off
the front side and was able to get the front half out through where the
headlight sits. Looks like the only way I'm going to get to the other
half is to pull the air cleaner housing.

JeffD.

In article
<lbioc.48152$n7P1.875@twister01.bloor.is.net.cable .rogers.com>,
"Cherokee-LTD" <spammenot@home.com> wrote:

> "JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
> news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
> : Well, looks like that's tomorrow's project then. I start work on Sunday,
> : night shifts. Would kind of suck having to strap maglights to the
> : mirrors for the drive.
> :
> That's a bitch of a place to work on... I can hardly get my hand down there
> to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
> -Brian
>
>
Yeah, I'm not looking forward to it. I already took most everything off
the front side and was able to get the front half out through where the
headlight sits. Looks like the only way I'm going to get to the other
half is to pull the air cleaner housing.

JeffD.

In article
<lbioc.48152$n7P1.875@twister01.bloor.is.net.cable .rogers.com>,
"Cherokee-LTD" <spammenot@home.com> wrote:

> "JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
> news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
> : Well, looks like that's tomorrow's project then. I start work on Sunday,
> : night shifts. Would kind of suck having to strap maglights to the
> : mirrors for the drive.
> :
> That's a bitch of a place to work on... I can hardly get my hand down there
> to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
> -Brian
>
>
Yeah, I'm not looking forward to it. I already took most everything off
the front side and was able to get the front half out through where the
headlight sits. Looks like the only way I'm going to get to the other
half is to pull the air cleaner housing.

JeffD.

In article
<lbioc.48152$n7P1.875@twister01.bloor.is.net.cable .rogers.com>,
"Cherokee-LTD" <spammenot@home.com> wrote:

> "JeffD." <dumaisjpka@earthlink.net.org.com.com> wrote in message
> news:dumaisjpka-C89251.00223812052004@news03.east.earthlink.net...
> : Well, looks like that's tomorrow's project then. I start work on Sunday,
> : night shifts. Would kind of suck having to strap maglights to the
> : mirrors for the drive.
> :
> That's a bitch of a place to work on... I can hardly get my hand down there
> to disconnect it nevermind solder, shrink tube, and wire loom it. Good luck!
> -Brian
>
>
Yeah, I'm not looking forward to it. I already took most everything off
the front side and was able to get the front half out through where the
headlight sits. Looks like the only way I'm going to get to the other
half is to pull the air cleaner housing.

Joseph P

In news:40A170C8.B28CDB57@sympatico.ca,
Mike Romain from <romainm@sympatico.ca> was injured because:

| No problem, I do that all the time on old beasts.
|
| Mike

Shouldn't talk about your wife like that... ;)

--
--
Joe Pribe
NC

Pull my finger to reply by email.

jpribe 'at' nc.rr.com
jegp 'at' hotmail.com

I Love My O|||||||O