Harmonic balancer tool
#11
Guest
Posts: n/a
Re: Harmonic balancer tool
i just use the bolt and some washers with a impact gun
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
#12
Guest
Posts: n/a
Re: Harmonic balancer tool
i just use the bolt and some washers with a impact gun
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
#13
Guest
Posts: n/a
Re: Harmonic balancer tool
i just use the bolt and some washers with a impact gun
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
Jeffrey DeWitt wrote:
> According to Bills website you should use a harmonic balancer
> installation tool to put the balancer back on. None of the local stores
> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> all had pullers.
>
> Where do you get this tool? Would any local place be likely to carry
> one or is this something only available through mail order? I see
> Moroso has one but it's kind of pricey for something I'll rarely use.
>
> Thanks!
>
> Jeff DeWitt
#14
Guest
Posts: n/a
Re: Harmonic balancer tool
The thinking is that the threads on the special tool save wear and tear on
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
#15
Guest
Posts: n/a
Re: Harmonic balancer tool
The thinking is that the threads on the special tool save wear and tear on
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
#16
Guest
Posts: n/a
Re: Harmonic balancer tool
The thinking is that the threads on the special tool save wear and tear on
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
the crank threads.
Earle
"philthy" <dbrider@cac.net> wrote in message
news:460FC74E.8E096D22@cac.net...
> i just use the bolt and some washers with a impact gun
>
> Jeffrey DeWitt wrote:
>
> > According to Bills website you should use a harmonic balancer
> > installation tool to put the balancer back on. None of the local stores
> > I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
> > all had pullers.
> >
> > Where do you get this tool? Would any local place be likely to carry
> > one or is this something only available through mail order? I see
> > Moroso has one but it's kind of pricey for something I'll rarely use.
> >
> > Thanks!
> >
> > Jeff DeWitt
>
#17
Guest
Posts: n/a
Re: Harmonic balancer tool
I'm thinking the bolt is not quite long enough to pull it from the
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
#18
Guest
Posts: n/a
Re: Harmonic balancer tool
I'm thinking the bolt is not quite long enough to pull it from the
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
#19
Guest
Posts: n/a
Re: Harmonic balancer tool
I'm thinking the bolt is not quite long enough to pull it from the
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
start. So what is a mallet going to hurt?
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Earle Horton" <gracioso@usa.com> wrote in message
news:460fdfb7$0$31826$a82e2bb9@reader.athenanews.c om...
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
--
Posted via a free Usenet account from http://www.teranews.com
#20
Guest
Posts: n/a
Re: Harmonic balancer tool
According to Bills website the regular bolt is too weak and short, I'm
guessing it isn't long enough to get enough bite into the threads to
pull the balancer in.
This afternoon I found a couple of longer bolts at Lowes and I'm going
to give them a try.
I'll let everyone know how it turns out.
Thanks!
Jeff DeWitt
Earle Horton wrote:
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
>
> "philthy" <dbrider@cac.net> wrote in message
> news:460FC74E.8E096D22@cac.net...
>> i just use the bolt and some washers with a impact gun
>>
>> Jeffrey DeWitt wrote:
>>
>>> According to Bills website you should use a harmonic balancer
>>> installation tool to put the balancer back on. None of the local stores
>>> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
>>> all had pullers.
>>>
>>> Where do you get this tool? Would any local place be likely to carry
>>> one or is this something only available through mail order? I see
>>> Moroso has one but it's kind of pricey for something I'll rarely use.
>>>
>>> Thanks!
>>>
>>> Jeff DeWitt
>
>
guessing it isn't long enough to get enough bite into the threads to
pull the balancer in.
This afternoon I found a couple of longer bolts at Lowes and I'm going
to give them a try.
I'll let everyone know how it turns out.
Thanks!
Jeff DeWitt
Earle Horton wrote:
> The thinking is that the threads on the special tool save wear and tear on
> the crank threads.
>
> Earle
>
> "philthy" <dbrider@cac.net> wrote in message
> news:460FC74E.8E096D22@cac.net...
>> i just use the bolt and some washers with a impact gun
>>
>> Jeffrey DeWitt wrote:
>>
>>> According to Bills website you should use a harmonic balancer
>>> installation tool to put the balancer back on. None of the local stores
>>> I checked had such a thing (Auto Zone, Advance, Northern Tool), but they
>>> all had pullers.
>>>
>>> Where do you get this tool? Would any local place be likely to carry
>>> one or is this something only available through mail order? I see
>>> Moroso has one but it's kind of pricey for something I'll rarely use.
>>>
>>> Thanks!
>>>
>>> Jeff DeWitt
>
>