Hard Shifting??
Guest
Posts: n/a
Re: Hard Shifting??
Red Line MT-90 is often recommended. I am using Penzoil Synchromesh in
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
Guest
Posts: n/a
Re: Hard Shifting??
Red Line MT-90 is often recommended. I am using Penzoil Synchromesh in
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
Guest
Posts: n/a
Re: Hard Shifting??
Red Line MT-90 is often recommended. I am using Penzoil Synchromesh in
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
an AX5 and it works very well.
Help-Slip-Franklin wrote:
> I replaced mine with a dino brand, wasn't sure about a change over to syn,
> but that discussion has already been had here.
> H-S-F
>
> "Lon" <lon.stowell@comcast.net> wrote in message
> news:eomdnYn6wu3qaQLYnZ2dnUVZ_oTinZ2d@comcast.com. ..
> > Either of you tried replacing your transmission oil with a good synth
> > designed for THAT model transmission?
> >
> >
> > Help-Slip-Franklin proclaimed:
> >
> >> Not that this helps solve your problem, but my '94YJ does the exact same
> >> thing from 1st to 2nd, and it has 78K. Maybe someone can enlighten us.
> >> H-S-F
> >>
> >> "Tracie" <brainart@upstate.edu> wrote in message
> >> news:1168007923.080325.58210@s80g2000cwa.googlegro ups.com...
> >>
> >>>Hi all. I have a 2006 Jeep Wrangler that has 2200 miles on her. She
> >>>has a 6 speed manual tranny. Anyone else have problems shifting first
> >>>thing when starting up your jeep? All gears shift fine EXCEPT from 1st
> >>>to 2nd. This seems to shift a little "clunky" and stiff until I have
> >>>had her running for at least 15-20 minutes. Then she shifts fine for
> >>>the rest of the trip (until I shut her off and leave her for several
> >>>hours. Then it's the same thing all over again.) I have driven
> >>>several manual trannys over the years, but have never driven one that
> >>>shifts this clunky from 1st to 2nd when you first start out for the
> >>>day. Then again, I have never owned or driven a Wrangler prior to this
> >>>either. Any ideas what this could be caused from? THANKS
> >>>
> >>
> >>
Thread
Thread Starter
Forum
Replies
Last Post
NewfieGC
Jeep Grand Cherokee Forum
0
Dec 19, 2011 06:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)