Harbor Freight Tools: got the 3 ton floor jack
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Where are you jacking at Mike? I use the stock jack point (or close to it)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Where are you jacking at Mike? I use the stock jack point (or close to it)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Where are you jacking at Mike? I use the stock jack point (or close to it)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
and need all the lift my 3 ton jack gives (depending on "summer'' or winter
tires) of 19''.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41475AA2.4BABED40@sympatico.ca...
> LOL!
>
> Man oh man, just how fat and soft are the tires? Do you have those
> arctic tires on that are 3' wide and 2' deep when soft or something?
>
> I only need to jack my Cherokee up about 2" to take off an inflated tire
> and about 6" maybe to change a flat....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Wblane wrote:
> >
> > It's only got 19" of lift though, I just hope that's enough for my stone
stock
> > Cherokee. I thought someone here said I'd need 23" of lift!
> > -Bill (remove "botizer" to reply via email)
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
You must jack on the axle... not the frame.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
You must jack on the axle... not the frame.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
You must jack on the axle... not the frame.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
Stock 3.08 Gears
33" BFG AT on 15x10 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Snow" <snowball_2004@msn.com> wrote in message
news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
> Where are you jacking at Mike? I use the stock jack point (or close to
it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or
winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my
stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Unless you're installing a suspension lift. ;)
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Unless you're installing a suspension lift. ;)
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
Unless you're installing a suspension lift. ;)
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Jerry
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
"JimG" <jimg@2muchspam.com> wrote in message
news:chM1d.3987$4i2.3297@news01.roc.ny...
> You must jack on the axle... not the frame.
>
> --
> JimG
> 80' CJ-7 258 CID, HEI
> 4.56 Gears, Lock-Right F&R
> 35" BFG MT on 15x10 Centerlines
> D44 Rear, D30 Front. SOA
> Dana 300 w/4:1 & Currie twin sticks
> Warn X8000i w/ dual batteries
>
> 00' TJ Sport 4.0L, 5sp
> Stock 3.08 Gears
> 33" BFG AT on 15x10 Eagle Alloys
> D35 Rear, D30 Front. 3" Suspension Lift
>
> "Snow" <snowball_2004@msn.com> wrote in message
> news:ixK1d.11364$0h7.890607@news20.bellglobal.com. ..
>> Where are you jacking at Mike? I use the stock jack point (or close to
> it)
>> and need all the lift my 3 ton jack gives (depending on "summer'' or
> winter
>> tires) of 19''.
>>
>> Snow...
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:41475AA2.4BABED40@sympatico.ca...
>> > LOL!
>> >
>> > Man oh man, just how fat and soft are the tires? Do you have those
>> > arctic tires on that are 3' wide and 2' deep when soft or something?
>> >
>> > I only need to jack my Cherokee up about 2" to take off an inflated
>> > tire
>> > and about 6" maybe to change a flat....
>> >
>> > Mike
>> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > 88 Cherokee 235 BFG AT's
>> >
>> > Wblane wrote:
>> > >
>> > > It's only got 19" of lift though, I just hope that's enough for my
> stone
>> stock
>> > > Cherokee. I thought someone here said I'd need 23" of lift!
>> > > -Bill (remove "botizer" to reply via email)
>>
>>
>
>
Guest
Posts: n/a
Re: Harbor Freight Tools: got the 3 ton floor jack
I use the axle tubes or the shock/spring mount and just jack up the axle
end when working on tires or brakes.
Jacking up the side of the vehicle so you have an unstable wobbly jack
fully extended is not my idea of fun.
If I do need to get the whole vehicle up, then I use a plate under the
jack so it doesn't dig into my 'paved' driveway and I get jack stands
under fast.
Mike
Snow wrote:
>
> Where are you jacking at Mike? I use the stock jack point (or close to it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
end when working on tires or brakes.
Jacking up the side of the vehicle so you have an unstable wobbly jack
fully extended is not my idea of fun.
If I do need to get the whole vehicle up, then I use a plate under the
jack so it doesn't dig into my 'paved' driveway and I get jack stands
under fast.
Mike
Snow wrote:
>
> Where are you jacking at Mike? I use the stock jack point (or close to it)
> and need all the lift my 3 ton jack gives (depending on "summer'' or winter
> tires) of 19''.
>
> Snow...
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:41475AA2.4BABED40@sympatico.ca...
> > LOL!
> >
> > Man oh man, just how fat and soft are the tires? Do you have those
> > arctic tires on that are 3' wide and 2' deep when soft or something?
> >
> > I only need to jack my Cherokee up about 2" to take off an inflated tire
> > and about 6" maybe to change a flat....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > Wblane wrote:
> > >
> > > It's only got 19" of lift though, I just hope that's enough for my stone
> stock
> > > Cherokee. I thought someone here said I'd need 23" of lift!
> > > -Bill (remove "botizer" to reply via email)
