Looking at one of the pics, it appears the rollbar ends about at the end of
the top of the wheelwell. An older CJ "sportbar" (the one that also bolted
through the side of the body) would probably work. You also might want the
one that rises at 90 degrees vs. the one that leans back. -G

--
NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bri46d$3j15g$1@ID-193866.news.uni-berlin.de...
> Well, I don't want to buy the whole jeep just to get a half hard top :-).
> Looks, though, like the vertical bar on the roll bar on a cj8 allows for
the
> half hard top as it is vertical with no slope. This is different from the
> CJ7 which has a degree of slope. So in this case would the Roll bar on
the
> CJ7 need to be modified to allow the CJ8 Half Hard top to fit?
>
> Thanks,
>
> Bill
>
>
>
> "Eugene Casinias" <nospamGenoCas@ppp.kornet21.net> wrote in message
> news:brhm4o$b67$1@news1.kornet.net...
> > This one's on Ebay right now... looks like a dealer though.
> >
> >
>
http://cgi.ebay.com/ebaymotors/ws/eB...2448071247&cat
> > egory=6280
> >
> >
> > --
> > NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > > I have an 83 CJ7 and was wondering if a half hard top from a
Scrambler
> > > would fit on a CJ7. Also, are there any after market producers of
Half
> > > Hardtops for the CJ7?
> > >
> > > I want this to fit with Full Hard doors for winter time driving and I
> > don't
> > > like the full hard top as an option. Too big and bulky.
> > >
> > > Thanks for any help, comments, or suggestions.
> > >
> > > bill
> > >
> > >
> >
> >
>
>

 

Looking at one of the pics, it appears the rollbar ends about at the end of
the top of the wheelwell. An older CJ "sportbar" (the one that also bolted
through the side of the body) would probably work. You also might want the
one that rises at 90 degrees vs. the one that leans back. -G

--
NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bri46d$3j15g$1@ID-193866.news.uni-berlin.de...
> Well, I don't want to buy the whole jeep just to get a half hard top :-).
> Looks, though, like the vertical bar on the roll bar on a cj8 allows for
the
> half hard top as it is vertical with no slope. This is different from the
> CJ7 which has a degree of slope. So in this case would the Roll bar on
the
> CJ7 need to be modified to allow the CJ8 Half Hard top to fit?
>
> Thanks,
>
> Bill
>
>
>
> "Eugene Casinias" <nospamGenoCas@ppp.kornet21.net> wrote in message
> news:brhm4o$b67$1@news1.kornet.net...
> > This one's on Ebay right now... looks like a dealer though.
> >
> >
>
http://cgi.ebay.com/ebaymotors/ws/eB...2448071247&cat
> > egory=6280
> >
> >
> > --
> > NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > > I have an 83 CJ7 and was wondering if a half hard top from a
Scrambler
> > > would fit on a CJ7. Also, are there any after market producers of
Half
> > > Hardtops for the CJ7?
> > >
> > > I want this to fit with Full Hard doors for winter time driving and I
> > don't
> > > like the full hard top as an option. Too big and bulky.
> > >
> > > Thanks for any help, comments, or suggestions.
> > >
> > > bill
> > >
> > >
> >
> >
>
>

 

Looking at one of the pics, it appears the rollbar ends about at the end of
the top of the wheelwell. An older CJ "sportbar" (the one that also bolted
through the side of the body) would probably work. You also might want the
one that rises at 90 degrees vs. the one that leans back. -G

--
NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:bri46d$3j15g$1@ID-193866.news.uni-berlin.de...
> Well, I don't want to buy the whole jeep just to get a half hard top :-).
> Looks, though, like the vertical bar on the roll bar on a cj8 allows for
the
> half hard top as it is vertical with no slope. This is different from the
> CJ7 which has a degree of slope. So in this case would the Roll bar on
the
> CJ7 need to be modified to allow the CJ8 Half Hard top to fit?
>
> Thanks,
>
> Bill
>
>
>
> "Eugene Casinias" <nospamGenoCas@ppp.kornet21.net> wrote in message
> news:brhm4o$b67$1@news1.kornet.net...
> > This one's on Ebay right now... looks like a dealer though.
> >
> >
>
http://cgi.ebay.com/ebaymotors/ws/eB...2448071247&cat
> > egory=6280
> >
> >
> > --
> > NoSpamGenoCas@ppp.kornet21.net Remove "NoSpam" for reply email
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> > > Hi all,
> > > I have an 83 CJ7 and was wondering if a half hard top from a
Scrambler
> > > would fit on a CJ7. Also, are there any after market producers of
Half
> > > Hardtops for the CJ7?
> > >
> > > I want this to fit with Full Hard doors for winter time driving and I
> > don't
> > > like the full hard top as an option. Too big and bulky.
> > >
> > > Thanks for any help, comments, or suggestions.
> > >
> > > bill
> > >
> > >
> >
> >
>
>

 

CJ-8 half tops will fit a CJ-7. However, if your 7's roll bar goes to the
floor forward of the rear area step down, it will interfere with the 8 half
top. You'll need either the bars that only mount on the fenderwells, or
you'll need to make a new bar.

The biggest problem you'll have is the lower part of the half cab. There is
a metal divider that goes across the back to separate the front and back.
This IS NOT part of the half cab. It is a separate piece.

Other than that, the 7 and 8 are identical. Doors will work no problem.

Finally, if your 7 has shoulder belts, you will likely have to be creative
if you want/need to retain them. The '82 (IIRC) and up 8 half tops did
include shoulder belts (mine has them). There is a hole in the half top
that allows a bolt to pass through and screw into the roll bar.

I can send you picts of the 8 if you need details or measurements.

"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> Hi all,
> I have an 83 CJ7 and was wondering if a half hard top from a Scrambler
> would fit on a CJ7. Also, are there any after market producers of Half
> Hardtops for the CJ7?
>
> I want this to fit with Full Hard doors for winter time driving and I
don't
> like the full hard top as an option. Too big and bulky.
>
> Thanks for any help, comments, or suggestions.
>
> bill
>
>

 

CJ-8 half tops will fit a CJ-7. However, if your 7's roll bar goes to the
floor forward of the rear area step down, it will interfere with the 8 half
top. You'll need either the bars that only mount on the fenderwells, or
you'll need to make a new bar.

The biggest problem you'll have is the lower part of the half cab. There is
a metal divider that goes across the back to separate the front and back.
This IS NOT part of the half cab. It is a separate piece.

Other than that, the 7 and 8 are identical. Doors will work no problem.

Finally, if your 7 has shoulder belts, you will likely have to be creative
if you want/need to retain them. The '82 (IIRC) and up 8 half tops did
include shoulder belts (mine has them). There is a hole in the half top
that allows a bolt to pass through and screw into the roll bar.

I can send you picts of the 8 if you need details or measurements.

"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> Hi all,
> I have an 83 CJ7 and was wondering if a half hard top from a Scrambler
> would fit on a CJ7. Also, are there any after market producers of Half
> Hardtops for the CJ7?
>
> I want this to fit with Full Hard doors for winter time driving and I
don't
> like the full hard top as an option. Too big and bulky.
>
> Thanks for any help, comments, or suggestions.
>
> bill
>
>

 

CJ-8 half tops will fit a CJ-7. However, if your 7's roll bar goes to the
floor forward of the rear area step down, it will interfere with the 8 half
top. You'll need either the bars that only mount on the fenderwells, or
you'll need to make a new bar.

The biggest problem you'll have is the lower part of the half cab. There is
a metal divider that goes across the back to separate the front and back.
This IS NOT part of the half cab. It is a separate piece.

Other than that, the 7 and 8 are identical. Doors will work no problem.

Finally, if your 7 has shoulder belts, you will likely have to be creative
if you want/need to retain them. The '82 (IIRC) and up 8 half tops did
include shoulder belts (mine has them). There is a hole in the half top
that allows a bolt to pass through and screw into the roll bar.

I can send you picts of the 8 if you need details or measurements.

"William Oliveri" <wuji@bigvalley.net> wrote in message
news:brgolk$318hf$1@ID-193866.news.uni-berlin.de...
> Hi all,
> I have an 83 CJ7 and was wondering if a half hard top from a Scrambler
> would fit on a CJ7. Also, are there any after market producers of Half
> Hardtops for the CJ7?
>
> I want this to fit with Full Hard doors for winter time driving and I
don't
> like the full hard top as an option. Too big and bulky.
>
> Thanks for any help, comments, or suggestions.
>
> bill
>
>