|
Grind/Click Sound - Front Axle
97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual
noise during slow speed tight turns. Parked the Jeep and used the daughters car to finish up last week of work. Now that I'm on vacation, I jacked up the jeep yesterday, and it sounded like the brake pads ( the vehicle was inspected a couple of months back, and they passed it with a note that the pads would need to be replaced soon). So, wife drives into the city and picks up new pads on her way home from work. I replace them, and I'm still getting the noise on the passenger side when I spin the tire. Does it with the vehicle lifted and when the tires are straight. This same noise was also made when the vehicle was on the ground/stationary, and turning the steering. I replaced the hub assy last fall. I looked at the u-joint, and didn't notice any play...but, I know looks can be deceiving. Any thoughts? Am I looking at replacing the u-joint, or do I have a defective hub assy? Thnks, Eric in NNY |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY I would cut the wheels hard to the side and then hand spin the wheel while feeling the u-joint... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY I would cut the wheels hard to the side and then hand spin the wheel while feeling the u-joint... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY I would cut the wheels hard to the side and then hand spin the wheel while feeling the u-joint... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY I would cut the wheels hard to the side and then hand spin the wheel while feeling the u-joint... Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Grind/Click Sound - Front Axle
On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca>
wrote: >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY > >I would cut the wheels hard to the side and then hand spin the wheel >while feeling the u-joint... > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's - Gone to the rust pile... >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) Did that...makes the same noise if the wheels are cut too the left, right...or jacked up and straight. |
Re: Grind/Click Sound - Front Axle
On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca>
wrote: >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY > >I would cut the wheels hard to the side and then hand spin the wheel >while feeling the u-joint... > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's - Gone to the rust pile... >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) Did that...makes the same noise if the wheels are cut too the left, right...or jacked up and straight. |
Re: Grind/Click Sound - Front Axle
On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca>
wrote: >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY > >I would cut the wheels hard to the side and then hand spin the wheel >while feeling the u-joint... > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's - Gone to the rust pile... >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) Did that...makes the same noise if the wheels are cut too the left, right...or jacked up and straight. |
Re: Grind/Click Sound - Front Axle
On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca>
wrote: >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY > >I would cut the wheels hard to the side and then hand spin the wheel >while feeling the u-joint... > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's - Gone to the rust pile... >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) Did that...makes the same noise if the wheels are cut too the left, right...or jacked up and straight. |
Re: Grind/Click Sound - Front Axle
A wheel weight hitting your rotor rock deflector?
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ <eric@rr.com> wrote in message news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axle
A wheel weight hitting your rotor rock deflector?
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ <eric@rr.com> wrote in message news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axle
A wheel weight hitting your rotor rock deflector?
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ <eric@rr.com> wrote in message news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axle
A wheel weight hitting your rotor rock deflector?
God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ <eric@rr.com> wrote in message news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
On this particular day of this month, in the Year Of The Golden Pig, L.W.
(Bill) ------ III did state: > A wheel weight hitting your rotor rock deflector? > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ Now how in hell would you know, Gasbag? You know /nothing/ that google doesn't whisper in your flabby ears. And yes, they are in fact flabby. And they match your blotchy alkie's complexion and bloodshot eyes, too. Now be a good little Mad Hatter and go piss up a rope. > > > <eric@rr.com> wrote in message > news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... >> >> Did that...makes the same noise if the wheels are cut too the left, >> right...or jacked up and straight. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
On this particular day of this month, in the Year Of The Golden Pig, L.W.
(Bill) ------ III did state: > A wheel weight hitting your rotor rock deflector? > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ Now how in hell would you know, Gasbag? You know /nothing/ that google doesn't whisper in your flabby ears. And yes, they are in fact flabby. And they match your blotchy alkie's complexion and bloodshot eyes, too. Now be a good little Mad Hatter and go piss up a rope. > > > <eric@rr.com> wrote in message > news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... >> >> Did that...makes the same noise if the wheels are cut too the left, >> right...or jacked up and straight. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
On this particular day of this month, in the Year Of The Golden Pig, L.W.
(Bill) ------ III did state: > A wheel weight hitting your rotor rock deflector? > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ Now how in hell would you know, Gasbag? You know /nothing/ that google doesn't whisper in your flabby ears. And yes, they are in fact flabby. And they match your blotchy alkie's complexion and bloodshot eyes, too. Now be a good little Mad Hatter and go piss up a rope. > > > <eric@rr.com> wrote in message > news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... >> >> Did that...makes the same noise if the wheels are cut too the left, >> right...or jacked up and straight. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
On this particular day of this month, in the Year Of The Golden Pig, L.W.
(Bill) ------ III did state: > A wheel weight hitting your rotor rock deflector? > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ Now how in hell would you know, Gasbag? You know /nothing/ that google doesn't whisper in your flabby ears. And yes, they are in fact flabby. And they match your blotchy alkie's complexion and bloodshot eyes, too. Now be a good little Mad Hatter and go piss up a rope. > > > <eric@rr.com> wrote in message > news:9l2v631isu3i7iln2kgrj780la4khafgqu@4ax.com... >> >> Did that...makes the same noise if the wheels are cut too the left, >> right...or jacked up and straight. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now with this cross post worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message news:ooMbi.18743$1i1.3184@pd7urf3no... > > Now how in hell would you know, Gasbag? > > You know /nothing/ that google doesn't whisper in your flabby ears. > > And yes, they are in fact flabby. And they match your blotchy alkie's > complexion and bloodshot eyes, too. > > Now be a good little Mad Hatter and go piss up a rope. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now with this cross post worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message news:ooMbi.18743$1i1.3184@pd7urf3no... > > Now how in hell would you know, Gasbag? > > You know /nothing/ that google doesn't whisper in your flabby ears. > > And yes, they are in fact flabby. And they match your blotchy alkie's > complexion and bloodshot eyes, too. > > Now be a good little Mad Hatter and go piss up a rope. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now with this cross post worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message news:ooMbi.18743$1i1.3184@pd7urf3no... > > Now how in hell would you know, Gasbag? > > You know /nothing/ that google doesn't whisper in your flabby ears. > > And yes, they are in fact flabby. And they match your blotchy alkie's > complexion and bloodshot eyes, too. > > Now be a good little Mad Hatter and go piss up a rope. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now with this cross post worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message news:ooMbi.18743$1i1.3184@pd7urf3no... > > Now how in hell would you know, Gasbag? > > You know /nothing/ that google doesn't whisper in your flabby ears. > > And yes, they are in fact flabby. And they match your blotchy alkie's > complexion and bloodshot eyes, too. > > Now be a good little Mad Hatter and go piss up a rope. -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
You misunderstood again. The OP said: > jacked up and straight. You are neither; just jacked off and gay. > "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message > news:ooMbi.18743$1i1.3184@pd7urf3no... >> >> Now how in hell would you know, Gasbag? >> >> You know /nothing/ that google doesn't whisper in your flabby ears. >> >> And yes, they are in fact flabby. And they match your blotchy alkie's >> complexion and bloodshot eyes, too. >> >> Now be a good little Mad Hatter and go piss up a rope. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
You misunderstood again. The OP said: > jacked up and straight. You are neither; just jacked off and gay. > "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message > news:ooMbi.18743$1i1.3184@pd7urf3no... >> >> Now how in hell would you know, Gasbag? >> >> You know /nothing/ that google doesn't whisper in your flabby ears. >> >> And yes, they are in fact flabby. And they match your blotchy alkie's >> complexion and bloodshot eyes, too. >> >> Now be a good little Mad Hatter and go piss up a rope. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
You misunderstood again. The OP said: > jacked up and straight. You are neither; just jacked off and gay. > "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message > news:ooMbi.18743$1i1.3184@pd7urf3no... >> >> Now how in hell would you know, Gasbag? >> >> You know /nothing/ that google doesn't whisper in your flabby ears. >> >> And yes, they are in fact flabby. And they match your blotchy alkie's >> complexion and bloodshot eyes, too. >> >> Now be a good little Mad Hatter and go piss up a rope. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
You misunderstood again. The OP said: > jacked up and straight. You are neither; just jacked off and gay. > "§qu@re Wheels" <ouzo-uzi@drunken_aim.net> wrote in message > news:ooMbi.18743$1i1.3184@pd7urf3no... >> >> Now how in hell would you know, Gasbag? >> >> You know /nothing/ that google doesn't whisper in your flabby ears. >> >> And yes, they are in fact flabby. And they match your blotchy alkie's >> complexion and bloodshot eyes, too. >> >> Now be a good little Mad Hatter and go piss up a rope. -- From: ----------@cox.net (via teranews) > > Reported to: internet.help@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca > And they are very tired of you. Message-ID: <464119a9$0$16368$88260bb3@free.teranews.com> Yes, there's a bitch that replies to me, kinda telling me the problem's with the Canadian Shaw's personnel. But prescience pays off and long as you violate the groups charter, or just Usenet's common decency, I'll be there to report you. You being a traitor is a especial incentive. |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Jesus H. Chrysler, Esq." <jc@heaven.xxx.net> wrote in message news:a%Mbi.18777$1i1.8098@pd7urf3no... ><snip queer fantasies over goats and my body, and the jealous senile babbling over my accomplishments and conquests> -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Jesus H. Chrysler, Esq." <jc@heaven.xxx.net> wrote in message news:a%Mbi.18777$1i1.8098@pd7urf3no... ><snip queer fantasies over goats and my body, and the jealous senile babbling over my accomplishments and conquests> -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Jesus H. Chrysler, Esq." <jc@heaven.xxx.net> wrote in message news:a%Mbi.18777$1i1.8098@pd7urf3no... ><snip queer fantasies over goats and my body, and the jealous senile babbling over my accomplishments and conquests> -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axhole
There you go again, from the biggest loser of them all! The jealous,
really jealous, I can't believe how jealous this little draft dodging coward schizophrenic psychopath liar hiding in Vancouver via S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca who's only way to get attention is to make a fool of it's self. With an obsession with perverts and goats, where it writes via remailers, and cross posts to other perverts to no one's surprise. With extreme jealous ranting over my documents, possessions, successes, manliness and super Southern California surfing body, beard, and loving family. Committing forgery over many of them proving I'm a responsible American man. You remind me of a little rat dog, like a Mexican Chiwawa with it's senseless barking, me too, me too. You're even more senile than I first thought. And the poor thing, you're too girlie to take responsibility for yourself again, by signing your statement like a man. That really thinks the group's members are so stupid not to know it's the same coward, you posting over and over again using schizophrenic psychopath forge up names??????? You're not worth any more time when a cut and paste this same paragraph it fits so well! But, now worth a forwarding to: internet.help@shaw.ca, security@shaw.ca, abuse@shaw.ca, internet.abuse@sjrb.ca, abuse@cox.net God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "Jesus H. Chrysler, Esq." <jc@heaven.xxx.net> wrote in message news:a%Mbi.18777$1i1.8098@pd7urf3no... ><snip queer fantasies over goats and my body, and the jealous senile babbling over my accomplishments and conquests> -- Posted via a free Usenet account from http://www.teranews.com |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > >> eric@rr.com wrote: >>> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >>> noise during slow speed tight turns. Parked the Jeep and used the >>> daughters car to finish up last week of work. Now that I'm on >>> vacation, I jacked up the jeep yesterday, and it sounded like the >>> brake pads ( the vehicle was inspected a couple of months back, and >>> they passed it with a note that the pads would need to be replaced >>> soon). So, wife drives into the city and picks up new pads on her way >>> home from work. I replace them, and I'm still getting the noise on the >>> passenger side when I spin the tire. Does it with the vehicle lifted >>> and when the tires are straight. This same noise was also made when >>> the vehicle was on the ground/stationary, and turning the steering. I >>> replaced the hub assy last fall. I looked at the u-joint, and didn't >>> notice any play...but, I know looks can be deceiving. >>> >>> Any thoughts? Am I looking at replacing the u-joint, or do I >>> have a defective hub assy? >>> >>> Thnks, >>> Eric in NNY >> I would cut the wheels hard to the side and then hand spin the wheel >> while feeling the u-joint... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. "What" is making the same noise? If you hold your hand on the u-joint and 'feel' it while slowly moving the wheel when cut to the side, you should be able to 'feel' the clicks. Are there any rust stains near the u-joint caps? Are the u-joints greasable (either a zerk on the X or little plugs on the ends of the caps) and have they been greased? Mike |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > >> eric@rr.com wrote: >>> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >>> noise during slow speed tight turns. Parked the Jeep and used the >>> daughters car to finish up last week of work. Now that I'm on >>> vacation, I jacked up the jeep yesterday, and it sounded like the >>> brake pads ( the vehicle was inspected a couple of months back, and >>> they passed it with a note that the pads would need to be replaced >>> soon). So, wife drives into the city and picks up new pads on her way >>> home from work. I replace them, and I'm still getting the noise on the >>> passenger side when I spin the tire. Does it with the vehicle lifted >>> and when the tires are straight. This same noise was also made when >>> the vehicle was on the ground/stationary, and turning the steering. I >>> replaced the hub assy last fall. I looked at the u-joint, and didn't >>> notice any play...but, I know looks can be deceiving. >>> >>> Any thoughts? Am I looking at replacing the u-joint, or do I >>> have a defective hub assy? >>> >>> Thnks, >>> Eric in NNY >> I would cut the wheels hard to the side and then hand spin the wheel >> while feeling the u-joint... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. "What" is making the same noise? If you hold your hand on the u-joint and 'feel' it while slowly moving the wheel when cut to the side, you should be able to 'feel' the clicks. Are there any rust stains near the u-joint caps? Are the u-joints greasable (either a zerk on the X or little plugs on the ends of the caps) and have they been greased? Mike |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > >> eric@rr.com wrote: >>> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >>> noise during slow speed tight turns. Parked the Jeep and used the >>> daughters car to finish up last week of work. Now that I'm on >>> vacation, I jacked up the jeep yesterday, and it sounded like the >>> brake pads ( the vehicle was inspected a couple of months back, and >>> they passed it with a note that the pads would need to be replaced >>> soon). So, wife drives into the city and picks up new pads on her way >>> home from work. I replace them, and I'm still getting the noise on the >>> passenger side when I spin the tire. Does it with the vehicle lifted >>> and when the tires are straight. This same noise was also made when >>> the vehicle was on the ground/stationary, and turning the steering. I >>> replaced the hub assy last fall. I looked at the u-joint, and didn't >>> notice any play...but, I know looks can be deceiving. >>> >>> Any thoughts? Am I looking at replacing the u-joint, or do I >>> have a defective hub assy? >>> >>> Thnks, >>> Eric in NNY >> I would cut the wheels hard to the side and then hand spin the wheel >> while feeling the u-joint... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. "What" is making the same noise? If you hold your hand on the u-joint and 'feel' it while slowly moving the wheel when cut to the side, you should be able to 'feel' the clicks. Are there any rust stains near the u-joint caps? Are the u-joints greasable (either a zerk on the X or little plugs on the ends of the caps) and have they been greased? Mike |
Re: Grind/Click Sound - Front Axle
eric@rr.com wrote:
> On Tue, 12 Jun 2007 21:02:52 -0400, Mike Romain <romainm@sympatico.ca> > wrote: > >> eric@rr.com wrote: >>> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >>> noise during slow speed tight turns. Parked the Jeep and used the >>> daughters car to finish up last week of work. Now that I'm on >>> vacation, I jacked up the jeep yesterday, and it sounded like the >>> brake pads ( the vehicle was inspected a couple of months back, and >>> they passed it with a note that the pads would need to be replaced >>> soon). So, wife drives into the city and picks up new pads on her way >>> home from work. I replace them, and I'm still getting the noise on the >>> passenger side when I spin the tire. Does it with the vehicle lifted >>> and when the tires are straight. This same noise was also made when >>> the vehicle was on the ground/stationary, and turning the steering. I >>> replaced the hub assy last fall. I looked at the u-joint, and didn't >>> notice any play...but, I know looks can be deceiving. >>> >>> Any thoughts? Am I looking at replacing the u-joint, or do I >>> have a defective hub assy? >>> >>> Thnks, >>> Eric in NNY >> I would cut the wheels hard to the side and then hand spin the wheel >> while feeling the u-joint... >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >> (More Off Road album links at bottom of the view page) > > Did that...makes the same noise if the wheels are cut too the left, > right...or jacked up and straight. "What" is making the same noise? If you hold your hand on the u-joint and 'feel' it while slowly moving the wheel when cut to the side, you should be able to 'feel' the clicks. Are there any rust stains near the u-joint caps? Are the u-joints greasable (either a zerk on the X or little plugs on the ends of the caps) and have they been greased? Mike |
Re: Grind/Click Sound - Front Axle
First thing I'd look at is the steering knuckle U-joint. Look for a
trace of rust around the rim of the rubber seal on the joint cups. Jack it up, put transfer case in 4wd, try turning the wheel back and forth see if you get ANY play in the joint. Mike mentioned cutting it hard, do that both left and right. If you recently replaced the hub, replacing the U-joint should take less than an hour. On a 10 year old vehicle, you are about due. eric@rr.com wrote: > 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY |
Re: Grind/Click Sound - Front Axle
First thing I'd look at is the steering knuckle U-joint. Look for a
trace of rust around the rim of the rubber seal on the joint cups. Jack it up, put transfer case in 4wd, try turning the wheel back and forth see if you get ANY play in the joint. Mike mentioned cutting it hard, do that both left and right. If you recently replaced the hub, replacing the U-joint should take less than an hour. On a 10 year old vehicle, you are about due. eric@rr.com wrote: > 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY |
Re: Grind/Click Sound - Front Axle
First thing I'd look at is the steering knuckle U-joint. Look for a
trace of rust around the rim of the rubber seal on the joint cups. Jack it up, put transfer case in 4wd, try turning the wheel back and forth see if you get ANY play in the joint. Mike mentioned cutting it hard, do that both left and right. If you recently replaced the hub, replacing the U-joint should take less than an hour. On a 10 year old vehicle, you are about due. eric@rr.com wrote: > 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY |
Re: Grind/Click Sound - Front Axle
First thing I'd look at is the steering knuckle U-joint. Look for a
trace of rust around the rim of the rubber seal on the joint cups. Jack it up, put transfer case in 4wd, try turning the wheel back and forth see if you get ANY play in the joint. Mike mentioned cutting it hard, do that both left and right. If you recently replaced the hub, replacing the U-joint should take less than an hour. On a 10 year old vehicle, you are about due. eric@rr.com wrote: > 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual > noise during slow speed tight turns. Parked the Jeep and used the > daughters car to finish up last week of work. Now that I'm on > vacation, I jacked up the jeep yesterday, and it sounded like the > brake pads ( the vehicle was inspected a couple of months back, and > they passed it with a note that the pads would need to be replaced > soon). So, wife drives into the city and picks up new pads on her way > home from work. I replace them, and I'm still getting the noise on the > passenger side when I spin the tire. Does it with the vehicle lifted > and when the tires are straight. This same noise was also made when > the vehicle was on the ground/stationary, and turning the steering. I > replaced the hub assy last fall. I looked at the u-joint, and didn't > notice any play...but, I know looks can be deceiving. > > Any thoughts? Am I looking at replacing the u-joint, or do I > have a defective hub assy? > > Thnks, > Eric in NNY |
Re: Grind/Click Sound - Front Axle
On Wed, 13 Jun 2007 13:09:04 GMT, RoyJ <spamless@microsoft.net> wrote:
>First thing I'd look at is the steering knuckle U-joint. Look for a >trace of rust around the rim of the rubber seal on the joint cups. Jack >it up, put transfer case in 4wd, try turning the wheel back and forth >see if you get ANY play in the joint. Mike mentioned cutting it hard, do >that both left and right. > >If you recently replaced the hub, replacing the U-joint should take >less than an hour. On a 10 year old vehicle, you are about due. > >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY Thanks all for the replies. The "knuckles" were replaced 4 years ago, but with the jeep being in 4WD 6 months out of the year, it's quite possible that they have run their course. I did see what looks to be like rust dust, but will have to pull the axle out to get a better look. If it needs a new part, might as well do it now before winter set's in! :) V/R, Eric in NNY |
Re: Grind/Click Sound - Front Axle
On Wed, 13 Jun 2007 13:09:04 GMT, RoyJ <spamless@microsoft.net> wrote:
>First thing I'd look at is the steering knuckle U-joint. Look for a >trace of rust around the rim of the rubber seal on the joint cups. Jack >it up, put transfer case in 4wd, try turning the wheel back and forth >see if you get ANY play in the joint. Mike mentioned cutting it hard, do >that both left and right. > >If you recently replaced the hub, replacing the U-joint should take >less than an hour. On a 10 year old vehicle, you are about due. > >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY Thanks all for the replies. The "knuckles" were replaced 4 years ago, but with the jeep being in 4WD 6 months out of the year, it's quite possible that they have run their course. I did see what looks to be like rust dust, but will have to pull the axle out to get a better look. If it needs a new part, might as well do it now before winter set's in! :) V/R, Eric in NNY |
Re: Grind/Click Sound - Front Axle
On Wed, 13 Jun 2007 13:09:04 GMT, RoyJ <spamless@microsoft.net> wrote:
>First thing I'd look at is the steering knuckle U-joint. Look for a >trace of rust around the rim of the rubber seal on the joint cups. Jack >it up, put transfer case in 4wd, try turning the wheel back and forth >see if you get ANY play in the joint. Mike mentioned cutting it hard, do >that both left and right. > >If you recently replaced the hub, replacing the U-joint should take >less than an hour. On a 10 year old vehicle, you are about due. > >eric@rr.com wrote: >> 97XJ Sport w/Dana 30 front axle. Noticed a few days ago an unusual >> noise during slow speed tight turns. Parked the Jeep and used the >> daughters car to finish up last week of work. Now that I'm on >> vacation, I jacked up the jeep yesterday, and it sounded like the >> brake pads ( the vehicle was inspected a couple of months back, and >> they passed it with a note that the pads would need to be replaced >> soon). So, wife drives into the city and picks up new pads on her way >> home from work. I replace them, and I'm still getting the noise on the >> passenger side when I spin the tire. Does it with the vehicle lifted >> and when the tires are straight. This same noise was also made when >> the vehicle was on the ground/stationary, and turning the steering. I >> replaced the hub assy last fall. I looked at the u-joint, and didn't >> notice any play...but, I know looks can be deceiving. >> >> Any thoughts? Am I looking at replacing the u-joint, or do I >> have a defective hub assy? >> >> Thnks, >> Eric in NNY Thanks all for the replies. The "knuckles" were replaced 4 years ago, but with the jeep being in 4WD 6 months out of the year, it's quite possible that they have run their course. I did see what looks to be like rust dust, but will have to pull the axle out to get a better look. If it needs a new part, might as well do it now before winter set's in! :) V/R, Eric in NNY |
| All times are GMT -4. The time now is 07:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands