Great Experience - Sheet Metal Guy
08-10-2006, 01:28 AM
#21
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Wow!! I just found this by doing a search .
Talk about Word of Mouth, and the compliments.
I Started making jeep products about 5-6 yrs ago , as I was looking fo
parts for mine. Everybody wantd way too much for their goods. So I mad
my own. Someone asked where I got my parts from..... and then the res
is history. I try to keep the costs down but the price of aluminum ha
shot way up since I started.
All I can say is ...
Thank you!
Yeah you better take care of that "F" key too!
Any way here is link to some photos that he may not have known about
'Jeep Diamond Plate
(http://groups.msn.com/GrimjeepersPage/welcome.msnw)
Thank you again...
Mike
fairtide@gmail.com Wrote:
> I hope this doesn't tick anyone here off but in the greater scheme of
> things it's recommendations like these that makes a board like this
> beneficial to all.
>
> I needed a panel for the shifter opening in the floor, and found
> Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ
> tub on a '85 CJ frame and the first floor plate I bought used on Ebay
> didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he
> set me up with a smooth aluminum (vs. diamond plate) panel that fit
> right straight out of the box, curved to fit the hump. The ****er
> openings lined up perfectly and the mounting holes around th
> perimiter
> as well as the boot mount holes were dead-nuts on, too. The price was
> very very reasonable and I got the piece here in New England in abou
> 4
> days.
>
> I don't want to go putting his phone number here unsolicited, but the
> email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a
> pleasure to do business with. And no, I have nothing to gain fro
> this
> recommendation.
>
> - Mik
--
GrimJeeper
08-10-2006, 01:28 AM
#22
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Wow!! I just found this by doing a search .
Talk about Word of Mouth, and the compliments.
I Started making jeep products about 5-6 yrs ago , as I was looking fo
parts for mine. Everybody wantd way too much for their goods. So I mad
my own. Someone asked where I got my parts from..... and then the res
is history. I try to keep the costs down but the price of aluminum ha
shot way up since I started.
All I can say is ...
Thank you!
Yeah you better take care of that "F" key too!
Any way here is link to some photos that he may not have known about
'Jeep Diamond Plate
(http://groups.msn.com/GrimjeepersPage/welcome.msnw)
Thank you again...
Mike
fairtide@gmail.com Wrote:
> I hope this doesn't tick anyone here off but in the greater scheme of
> things it's recommendations like these that makes a board like this
> beneficial to all.
>
> I needed a panel for the shifter opening in the floor, and found
> Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ
> tub on a '85 CJ frame and the first floor plate I bought used on Ebay
> didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he
> set me up with a smooth aluminum (vs. diamond plate) panel that fit
> right straight out of the box, curved to fit the hump. The ****er
> openings lined up perfectly and the mounting holes around th
> perimiter
> as well as the boot mount holes were dead-nuts on, too. The price was
> very very reasonable and I got the piece here in New England in abou
> 4
> days.
>
> I don't want to go putting his phone number here unsolicited, but the
> email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a
> pleasure to do business with. And no, I have nothing to gain fro
> this
> recommendation.
>
> - Mik
--
GrimJeeper
08-10-2006, 01:28 AM
#23
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Wow!! I just found this by doing a search .
Talk about Word of Mouth, and the compliments.
I Started making jeep products about 5-6 yrs ago , as I was looking fo
parts for mine. Everybody wantd way too much for their goods. So I mad
my own. Someone asked where I got my parts from..... and then the res
is history. I try to keep the costs down but the price of aluminum ha
shot way up since I started.
All I can say is ...
Thank you!
Yeah you better take care of that "F" key too!
Any way here is link to some photos that he may not have known about
'Jeep Diamond Plate
(http://groups.msn.com/GrimjeepersPage/welcome.msnw)
Thank you again...
Mike
fairtide@gmail.com Wrote:
> I hope this doesn't tick anyone here off but in the greater scheme of
> things it's recommendations like these that makes a board like this
> beneficial to all.
>
> I needed a panel for the shifter opening in the floor, and found
> Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ
> tub on a '85 CJ frame and the first floor plate I bought used on Ebay
> didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he
> set me up with a smooth aluminum (vs. diamond plate) panel that fit
> right straight out of the box, curved to fit the hump. The ****er
> openings lined up perfectly and the mounting holes around th
> perimiter
> as well as the boot mount holes were dead-nuts on, too. The price was
> very very reasonable and I got the piece here in New England in abou
> 4
> days.
>
> I don't want to go putting his phone number here unsolicited, but the
> email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a
> pleasure to do business with. And no, I have nothing to gain fro
> this
> recommendation.
>
> - Mik
--
GrimJeeper
08-10-2006, 09:41 AM
#24
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Unfortunately you have just undone the good word by SPAMMING a newsgroup
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
08-10-2006, 09:41 AM
#25
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Unfortunately you have just undone the good word by SPAMMING a newsgroup
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
08-10-2006, 09:41 AM
#26
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Unfortunately you have just undone the good word by SPAMMING a newsgroup
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
08-10-2006, 09:41 AM
#27
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Unfortunately you have just undone the good word by SPAMMING a newsgroup
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
with a formal Charter that forbids commercial posts.
I have found from experience Spammers only sell crap. Legit companies
don't need to SPAM for suckers.
The Charter for this group can be found here:
ftp://ftp.uu.net/usenet/news.announc...rs.jeep+******
You only rate a Boycott in my opinion.
Mike
GrimJeeper wrote:
>
> Wow!! I just found this by doing a search .
<spam snipped>
08-10-2006, 07:18 PM
#28
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
My appologies. You will not see me here again! Spamming was not m
intention.
TYVM
Mike
Mike Romain Wrote:
> Unfortunately you have just undone the good word by SPAMMING
> newsgroup
> with a formal Charter that forbids commercial posts.
>
> I have found from experience Spammers only sell crap. Legit companies
> don't need to SPAM for suckers.
>
> The Charter for this group can be found he
> http://tinyurl.com/jjq4v
>
> You only rate a Boycott in my opinion.
>
> Mike
>
> GrimJeeper wrote:-
>
> Wow!! I just found this by doing a search .-
> spam snippe
--
GrimJeeper
08-10-2006, 07:18 PM
#29
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
My appologies. You will not see me here again! Spamming was not m
intention.
TYVM
Mike
Mike Romain Wrote:
> Unfortunately you have just undone the good word by SPAMMING
> newsgroup
> with a formal Charter that forbids commercial posts.
>
> I have found from experience Spammers only sell crap. Legit companies
> don't need to SPAM for suckers.
>
> The Charter for this group can be found he
> http://tinyurl.com/jjq4v
>
> You only rate a Boycott in my opinion.
>
> Mike
>
> GrimJeeper wrote:-
>
> Wow!! I just found this by doing a search .-
> spam snippe
--
GrimJeeper
08-10-2006, 07:18 PM
#30
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
My appologies. You will not see me here again! Spamming was not m
intention.
TYVM
Mike
Mike Romain Wrote:
> Unfortunately you have just undone the good word by SPAMMING
> newsgroup
> with a formal Charter that forbids commercial posts.
>
> I have found from experience Spammers only sell crap. Legit companies
> don't need to SPAM for suckers.
>
> The Charter for this group can be found he
> http://tinyurl.com/jjq4v
>
> You only rate a Boycott in my opinion.
>
> Mike
>
> GrimJeeper wrote:-
>
> Wow!! I just found this by doing a search .-
> spam snippe
--
GrimJeeper
