Great Experience - Sheet Metal Guy
01-03-2006, 02:07 PM
#11
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
01-03-2006, 02:07 PM
#12
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
01-03-2006, 02:07 PM
#13
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
Mike's ebay store is at
http://stores.ebay.com/Custom-Jeep-Diamond-Plating
01-04-2006, 02:10 AM
#14
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
those F'ing keys will get you every time!
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
01-04-2006, 02:10 AM
#15
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
those F'ing keys will get you every time!
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
01-04-2006, 02:10 AM
#16
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
those F'ing keys will get you every time!
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
On Tue, 3 Jan 2006 19:07:40 UTC "fairtide@gmail.com"
<fairtide@gmail.com> wrote:
> Lol, Shifter. Shift - Er. My 'F' key must be sticky :(
>
> Mike's ebay store is at
> http://stores.ebay.com/Custom-Jeep-Diamond-Plating
>
--
Will Honea
01-04-2006, 12:26 PM
#17
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
I was gonna let it go, but I really needed the laugh!
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
01-04-2006, 12:26 PM
#18
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
I was gonna let it go, but I really needed the laugh!
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
01-04-2006, 12:26 PM
#19
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
I was gonna let it go, but I really needed the laugh!
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
Seahag
"Dave Milne" <jeep@_nospam_milne.info> wrote:
> LAMO !
>
>
> "Earle Horton" <NurseBustersNoSpam@msn.com> wrote:
>> "The shiter openings lined up perfectly..."
>>
>> Sounds like a plumbing job I did recently.
>>
>> Earle
>>
>> <fairtide@gmail.com> wrote in message
>> news:1136304365.145146.169890@g44g2000cwa.googlegr oups.com...
>> > I hope this doesn't tick anyone here off but in the
>> > greater scheme of
>> > things it's recommendations like these that makes a
>> > board like this
>> > beneficial to all.
>> >
>> > I needed a panel for the shifter opening in the floor,
>> > and found
>> > Grimjeeper Diamond Plating on the 'net. My project
>> > jeep is a '91 YJ
>> > tub on a '85 CJ frame and the first floor plate I
>> > bought used on Ebay
>> > didn't fit right. I emailed a picture to Mike at
>> > Grimmjeeper, and he
>> > set me up with a smooth aluminum (vs. diamond plate)
>> > panel that fit
>> > right straight out of the box, curved to fit the hump.
>> > The shiter
>> > openings lined up perfectly and the mounting holes
>> > around the perimiter
>> > as well as the boot mount holes were dead-nuts on, too.
>> > The price was
>> > very very reasonable and I got the piece here in New
>> > England in about 4
>> > days.
>> >
>> > I don't want to go putting his phone number here
>> > unsolicited, but the
>> > email is grimjeeper1 at hotmail dot com. Very
>> > Jeep-friendly and a
>> > pleasure to do business with. And no, I have nothing
>> > to gain from this
>> > recommendation.
>> >
>> > - Mike
>> >
>>
>>
>
>
08-10-2006, 01:28 AM
#20
Guest
Posts: n/a
Re: Great Experience - Sheet Metal Guy
Wow!! I just found this by doing a search .
Talk about Word of Mouth, and the compliments.
I Started making jeep products about 5-6 yrs ago , as I was looking fo
parts for mine. Everybody wantd way too much for their goods. So I mad
my own. Someone asked where I got my parts from..... and then the res
is history. I try to keep the costs down but the price of aluminum ha
shot way up since I started.
All I can say is ...
Thank you!
Yeah you better take care of that "F" key too!
Any way here is link to some photos that he may not have known about
'Jeep Diamond Plate
(http://groups.msn.com/GrimjeepersPage/welcome.msnw)
Thank you again...
Mike
fairtide@gmail.com Wrote:
> I hope this doesn't tick anyone here off but in the greater scheme of
> things it's recommendations like these that makes a board like this
> beneficial to all.
>
> I needed a panel for the shifter opening in the floor, and found
> Grimjeeper Diamond Plating on the 'net. My project jeep is a '91 YJ
> tub on a '85 CJ frame and the first floor plate I bought used on Ebay
> didn't fit right. I emailed a picture to Mike at Grimmjeeper, and he
> set me up with a smooth aluminum (vs. diamond plate) panel that fit
> right straight out of the box, curved to fit the hump. The ****er
> openings lined up perfectly and the mounting holes around th
> perimiter
> as well as the boot mount holes were dead-nuts on, too. The price was
> very very reasonable and I got the piece here in New England in abou
> 4
> days.
>
> I don't want to go putting his phone number here unsolicited, but the
> email is grimjeeper1 at hotmail dot com. Very Jeep-friendly and a
> pleasure to do business with. And no, I have nothing to gain fro
> this
> recommendation.
>
> - Mik
--
GrimJeeper
