Get the Yoke off
#2
Guest
Posts: n/a
Re: Get the Yoke off
Got it off. Used the harmonic balancer puller and it came right off.
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
#3
Guest
Posts: n/a
Re: Get the Yoke off
Got it off. Used the harmonic balancer puller and it came right off.
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
#4
Guest
Posts: n/a
Re: Get the Yoke off
Got it off. Used the harmonic balancer puller and it came right off.
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
bill
"William Oliveri" <wuji@bigvalley.net> wrote in message
news:2uin92F2batl7U1@uni-berlin.de...
> I'm putting in my CV shaft on my 83 CJ7, D300. Is there a trick to
getting
> the yoke off or just PB Blaster and something to pound with ?
>
> I got the nut off fine, just the yoke off the shaft is giving me trouble.
>
>
> Thanks,
> Bill
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Bob
Jeep Mailing List
75
10-08-2003 12:14 AM
Michael Vincenty
Jeep Mailing List
0
08-16-2003 10:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)