gear ration
10-15-2003, 10:19 AM
#11
Guest
Posts: n/a
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
10-15-2003, 10:19 AM
#12
Guest
Posts: n/a
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
10-15-2003, 10:19 AM
#13
Guest
Posts: n/a
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
that makes any difference.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
MUDLUVR wrote:
>
> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
> an 86 CJ7?
10-15-2003, 10:49 AM
#14
Guest
Posts: n/a
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-15-2003, 10:49 AM
#15
Guest
Posts: n/a
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-15-2003, 10:49 AM
#16
Guest
Posts: n/a
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
>that makes any difference.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>MUDLUVR wrote:
>>
>> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of
>> an 86 CJ7?
http://www.jeeptech.com/axle/amc20.html
If you have the Dana 30 front differential, then:
Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
from '80-'86 were 2.73
So it sounds like chances are you have 2.73 in your Dana 30 front end,
so 2.73 in your amc20 rear end. I think you can look on the front end
if it's a Dana 30 and try to find the tag that gives the axle ratio,
but if all else fails then do this:
http://www.jeeptech.com/AxleGeneral.html#ratio
That jeeptech.com seems to be a GREAT reference!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
10-15-2003, 03:04 PM
#17
Guest
Posts: n/a
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-15-2003, 03:04 PM
#18
Guest
Posts: n/a
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-15-2003, 03:04 PM
#19
Guest
Posts: n/a
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply
to Mike as your post is under.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
travis wrote:
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
10-15-2003, 06:06 PM
#20
Guest
Posts: n/a
Re: gear ration
Yes I do have the dana 30 in the front, it did have the 258 motor, currently
it has a 350 in it. I was trying to avoid having to remove the diff cover
and do the math, but that seems to be the safest. Thanks for the help.
"travis" <travist34removethis@hotmail.com> wrote in message
news:0anqov82ubm4h02iqkisbis6atja8rop2h@4ax.com...
> On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
> >that makes any difference.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >MUDLUVR wrote:
> >>
> >> Does anyone have an idea of what the gear ratio is for a stock amc 20
out of
> >> an 86 CJ7?
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
it has a 350 in it. I was trying to avoid having to remove the diff cover
and do the math, but that seems to be the safest. Thanks for the help.
"travis" <travist34removethis@hotmail.com> wrote in message
news:0anqov82ubm4h02iqkisbis6atja8rop2h@4ax.com...
> On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
> >that makes any difference.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
> >MUDLUVR wrote:
> >>
> >> Does anyone have an idea of what the gear ratio is for a stock amc 20
out of
> >> an 86 CJ7?
>
> http://www.jeeptech.com/axle/amc20.html
>
> If you have the Dana 30 front differential, then:
> Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and
> from '80-'86 were 2.73
>
> So it sounds like chances are you have 2.73 in your Dana 30 front end,
> so 2.73 in your amc20 rear end. I think you can look on the front end
> if it's a Dana 30 and try to find the tag that gives the axle ratio,
> but if all else fails then do this:
>
> http://www.jeeptech.com/AxleGeneral.html#ratio
>
> That jeeptech.com seems to be a GREAT reference!
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!