GC check engine trouble
04-12-2007, 05:30 PM
#11
Guest
Posts: n/a
Re: GC check engine trouble
I think I would go ahead and remove the driveshaft. Remember it's inch
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 05:30 PM
#12
Guest
Posts: n/a
Re: GC check engine trouble
I think I would go ahead and remove the driveshaft. Remember it's inch
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 05:30 PM
#13
Guest
Posts: n/a
Re: GC check engine trouble
I think I would go ahead and remove the driveshaft. Remember it's inch
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
pounds.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461E1D20.4A41275B@yahoo.com...
> Thanks Bill.
> Jeff, Im not too concerned that I got the right one because the code
reading
> says its the output sensor. When I bought the sensor, the dealer gave me
a
> copy of the manual that explained the troubleshooting procedure for the
whole
> circuit, but of course I cant find it. I guess I will crawl under it
tonight
> and change it and hope the fault is in the sensor itself.
>
> Thanks guys.
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:25 PM
#14
Guest
Posts: n/a
Re: GC check engine trouble
OK you got me here. Why would I have to remove the drive shaft?
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:25 PM
#15
Guest
Posts: n/a
Re: GC check engine trouble
OK you got me here. Why would I have to remove the drive shaft?
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:25 PM
#16
Guest
Posts: n/a
Re: GC check engine trouble
OK you got me here. Why would I have to remove the drive shaft?
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
John in Vegas
"L.W. (Bill) ------ III" wrote:
> I think I would go ahead and remove the driveshaft. Remember it's inch
> pounds.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461E1D20.4A41275B@yahoo.com...
> > Thanks Bill.
> > Jeff, Im not too concerned that I got the right one because the code
> reading
> > says its the output sensor. When I bought the sensor, the dealer gave me
> a
> > copy of the manual that explained the troubleshooting procedure for the
> whole
> > circuit, but of course I cant find it. I guess I will crawl under it
> tonight
> > and change it and hope the fault is in the sensor itself.
> >
> > Thanks guys.
> >
> > John in Vegas
>
> --
> Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:33 PM
#17
Guest
Posts: n/a
Re: GC check engine trouble
More room for a BMFH!
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:33 PM
#18
Guest
Posts: n/a
Re: GC check engine trouble
More room for a BMFH!
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 08:33 PM
#19
Guest
Posts: n/a
Re: GC check engine trouble
More room for a BMFH!
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"John in Vegas" <tj0llll0@yahoo.com> wrote in message
news:461ECE12.C747ACAA@yahoo.com...
> OK you got me here. Why would I have to remove the drive shaft?
>
> John in Vegas
--
Posted via a free Usenet account from http://www.teranews.com
04-12-2007, 10:23 PM
#20
Guest
Posts: n/a
Re: GC check engine trouble
What Bill, does he administer the inch pounds one blow at a time? What's the
BMFH for, the stuff isn't supposed to be tight.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461ec3eb$0$16399$88260bb3@free.teranews.com.. .
> More room for a BMFH!
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461ECE12.C747ACAA@yahoo.com...
>> OK you got me here. Why would I have to remove the drive shaft?
>>
>> John in Vegas
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
BMFH for, the stuff isn't supposed to be tight.
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:461ec3eb$0$16399$88260bb3@free.teranews.com.. .
> More room for a BMFH!
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
>
> "John in Vegas" <tj0llll0@yahoo.com> wrote in message
> news:461ECE12.C747ACAA@yahoo.com...
>> OK you got me here. Why would I have to remove the drive shaft?
>>
>> John in Vegas
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
