Fuel Supply line fitting difficult to remove
#11
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
Brian Moga did pass the time by typing:
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
#12
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
Brian Moga did pass the time by typing:
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
#13
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
Brian Moga did pass the time by typing:
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
> Can you cut off these fittling and use some hose or a different connection
> type that is not so damn hard to get apart or put together?
Generaly, no.
Your talking high pressure fuel lines and it's best to stick with the
factory connectors and use the proper tools to get them apart.
The job savings most often pays for the tools.
--
DougW
#14
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
If it's like a Ford: http://www.obd-codes.com/howto/fuelfilter.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
#15
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
If it's like a Ford: http://www.obd-codes.com/howto/fuelfilter.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
#16
Guest
Posts: n/a
Re: Fuel Supply line fitting difficult to remove
If it's like a Ford: http://www.obd-codes.com/howto/fuelfilter.php
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
jnm007a wrote:
>
> I'm trying to change my fuel pressure regulator for a 1999 jeep grand
> cherokee. I've removed 2 of the fittings; however the fitting on the
> fuel supply line has a plastic retainer. I've tried to remove it by
> looking at the instructions in the quick connect chart on the service
> manual; however I'm unable to get that sucker off. Am I suppose to use
> some special tool?
Thread
Thread Starter
Forum
Replies
Last Post
beerswillinplaidman
Jeep & 4x4 Items Wanted
1
03-23-2009 06:31 PM
William Oliveri
Jeep Mailing List
16
09-17-2003 03:27 PM
C. & J.
Jeep Mailing List
0
09-01-2003 05:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)