fuel sender wiring question
11-16-2003, 12:11 PM
#1
Guest
Posts: n/a
fuel sender wiring question
Please see this picture:
http://jeepadventures.dyndns.org/tem...fuelsender.jpg
See the one wire soldered to the top? Where should that connect to on
the other end? See the threaded stud where another wire connects?
Where should that be hooked to. I suspect the soldered-on wire should
go to ground and the threaded stud should have a wire attached to it
that leads to the fuel gauge. Is that right? Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
http://jeepadventures.dyndns.org/tem...fuelsender.jpg
See the one wire soldered to the top? Where should that connect to on
the other end? See the threaded stud where another wire connects?
Where should that be hooked to. I suspect the soldered-on wire should
go to ground and the threaded stud should have a wire attached to it
that leads to the fuel gauge. Is that right? Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
11-16-2003, 12:50 PM
#2
Guest
Posts: n/a
Re: fuel sender wiring question
The threaded plug is the power line, the spade is the ground.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
11-16-2003, 12:50 PM
#3
Guest
Posts: n/a
Re: fuel sender wiring question
The threaded plug is the power line, the spade is the ground.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
11-16-2003, 12:50 PM
#4
Guest
Posts: n/a
Re: fuel sender wiring question
The threaded plug is the power line, the spade is the ground.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
travis wrote:
>
> Please see this picture:
> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> See the one wire soldered to the top? Where should that connect to on
> the other end? See the threaded stud where another wire connects?
> Where should that be hooked to. I suspect the soldered-on wire should
> go to ground and the threaded stud should have a wire attached to it
> that leads to the fuel gauge. Is that right? Thank you.
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
11-16-2003, 01:08 PM
#5
Guest
Posts: n/a
Re: fuel sender wiring question
On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
11-16-2003, 01:08 PM
#6
Guest
Posts: n/a
Re: fuel sender wiring question
On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
11-16-2003, 01:08 PM
#7
Guest
Posts: n/a
Re: fuel sender wiring question
On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
<romainm@sympatico.ca> shared the following:
>The threaded plug is the power line, the spade is the ground.
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
By "power line" you mean that it should connect to the back of the
fuel gauge, right? Thanks.
>travis wrote:
>>
>> Please see this picture:
>> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
>> See the one wire soldered to the top? Where should that connect to on
>> the other end? See the threaded stud where another wire connects?
>> Where should that be hooked to. I suspect the soldered-on wire should
>> go to ground and the threaded stud should have a wire attached to it
>> that leads to the fuel gauge. Is that right? Thank you.
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> The meek shall inherit the earth. After I'm finished with it.
>> :wq!
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
11-16-2003, 01:55 PM
#8
Guest
Posts: n/a
Re: fuel sender wiring question
Yes, it is a pink wire if stock.
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
11-16-2003, 01:55 PM
#9
Guest
Posts: n/a
Re: fuel sender wiring question
Yes, it is a pink wire if stock.
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
11-16-2003, 01:55 PM
#10
Guest
Posts: n/a
Re: fuel sender wiring question
Yes, it is a pink wire if stock.
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!
Mike
travis wrote:
>
> On Sun, 16 Nov 2003 12:50:03 -0500, Mike Romain
> <romainm@sympatico.ca> shared the following:
>
> >The threaded plug is the power line, the spade is the ground.
> >
> >Mike
> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >88 Cherokee 235 BFG AT's
> >
>
> By "power line" you mean that it should connect to the back of the
> fuel gauge, right? Thanks.
>
> >travis wrote:
> >>
> >> Please see this picture:
> >> http://jeepadventures.dyndns.org/tem...fuelsender.jpg
> >> See the one wire soldered to the top? Where should that connect to on
> >> the other end? See the threaded stud where another wire connects?
> >> Where should that be hooked to. I suspect the soldered-on wire should
> >> go to ground and the threaded stud should have a wire attached to it
> >> that leads to the fuel gauge. Is that right? Thank you.
> >>
> >> --
> >> Travis
> >> http://jeepadventures.dyndns.org/jeep.html
> >> The meek shall inherit the earth. After I'm finished with it.
> >> :wq!
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!