FS: small wire feed 120v welder
#21
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"
>I was looking at this one: http://tinyurl.com/4t5us
hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?
>From: "HomeBrewer"
>I was looking at this one: http://tinyurl.com/4t5us
hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?
#22
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
#23
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
#24
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
#25
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
components. i
> was under the impression you were going 220v?
I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
>
#26
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
#27
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
#28
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
#29
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
>From: "HomeBrewer"
>What are some of the pro/cons with the 110v/220v?
although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.
#30
Guest
Posts: n/a
Re: FS: small wire feed 120v welder
MontanaJeeper did pass the time by typing:
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.
That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ***. You need the largest wall box you can
fit.
Always run the primary outlet (220) first then sister off for any 110 outlets.
http://tinyurl.com/7ya2c
Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.
In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.
--
DougW
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.
That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ***. You need the largest wall box you can
fit.
Always run the primary outlet (220) first then sister off for any 110 outlets.
http://tinyurl.com/7ya2c
Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.
In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.
--
DougW