FS: small wire feed 120v welder
 

I'm upgrading to a larger welder for my CJ7 project and have put my little
crapsman wire feed on ebay. If you're interested: http://tinyurl.com/6fl3j

---or----

http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

Re: FS: small wire feed 120v welder
 

So you aren't really selling it at all, you are auctioning it off eh?

I won't call you names for misleading people because I might offend some
tender ears here, but....

The proper way to post is FA which means 'for auction' seeing as the
sucker ain't 'for sale'.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

HomeBrewer wrote:
>
> I'm upgrading to a larger welder for my CJ7 project and have put my little
> crapsman wire feed on ebay. If you're interested: http://tinyurl.com/6fl3j
>
> ---or----
>
> http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!

Re: FS: small wire feed 120v welder
 

So you aren't really selling it at all, you are auctioning it off eh?

I won't call you names for misleading people because I might offend some
tender ears here, but....

The proper way to post is FA which means 'for auction' seeing as the
sucker ain't 'for sale'.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

HomeBrewer wrote:
>
> I'm upgrading to a larger welder for my CJ7 project and have put my little
> crapsman wire feed on ebay. If you're interested: http://tinyurl.com/6fl3j
>
> ---or----
>
> http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!

Re: FS: small wire feed 120v welder
 

So you aren't really selling it at all, you are auctioning it off eh?

I won't call you names for misleading people because I might offend some
tender ears here, but....

The proper way to post is FA which means 'for auction' seeing as the
sucker ain't 'for sale'.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

HomeBrewer wrote:
>
> I'm upgrading to a larger welder for my CJ7 project and have put my little
> crapsman wire feed on ebay. If you're interested: http://tinyurl.com/6fl3j
>
> ---or----
>
> http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!

Re: FS: small wire feed 120v welder
 

So you aren't really selling it at all, you are auctioning it off eh?

I won't call you names for misleading people because I might offend some
tender ears here, but....

The proper way to post is FA which means 'for auction' seeing as the
sucker ain't 'for sale'.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

HomeBrewer wrote:
>
> I'm upgrading to a larger welder for my CJ7 project and have put my little
> crapsman wire feed on ebay. If you're interested: http://tinyurl.com/6fl3j
>
> ---or----
>
> http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!

For Auction: small wire feed 120v welder
 

ahh, I've seen FA before, didn't even cross my mind that it would make a
difference. sorry for misleading anyone.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

For Auction: small wire feed 120v welder
 

ahh, I've seen FA before, didn't even cross my mind that it would make a
difference. sorry for misleading anyone.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

For Auction: small wire feed 120v welder
 

ahh, I've seen FA before, didn't even cross my mind that it would make a
difference. sorry for misleading anyone.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

For Auction: small wire feed 120v welder
 

ahh, I've seen FA before, didn't even cross my mind that it would make a
difference. sorry for misleading anyone.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

Re: FS: small wire feed 120v welder
 

when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

I was looking at this one: http://tinyurl.com/4t5us


--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"MontanaJeeper" <montanajeeper@aol.com> wrote in message
news:20040715020839.05845.00001101@mb-m27.aol.com...
> when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

I was looking at this one: http://tinyurl.com/4t5us


--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"MontanaJeeper" <montanajeeper@aol.com> wrote in message
news:20040715020839.05845.00001101@mb-m27.aol.com...
> when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

I was looking at this one: http://tinyurl.com/4t5us


--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"MontanaJeeper" <montanajeeper@aol.com> wrote in message
news:20040715020839.05845.00001101@mb-m27.aol.com...
> when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

I was looking at this one: http://tinyurl.com/4t5us


--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"MontanaJeeper" <montanajeeper@aol.com> wrote in message
news:20040715020839.05845.00001101@mb-m27.aol.com...
> when you get ready to buy, see http://tinyurl.com/4p4t2

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>I was looking at this one: http://tinyurl.com/4t5us

hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>I was looking at this one: http://tinyurl.com/4t5us

hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>I was looking at this one: http://tinyurl.com/4t5us

hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>I was looking at this one: http://tinyurl.com/4t5us

hobart is a fine welder, built by miller and sharing many common components. i
was under the impression you were going 220v?

Re: FS: small wire feed 120v welder
 

> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?

I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

>

Re: FS: small wire feed 120v welder
 

> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?

I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

>

Re: FS: small wire feed 120v welder
 

> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?

I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

>

Re: FS: small wire feed 120v welder
 

> hobart is a fine welder, built by miller and sharing many common
components. i
> was under the impression you were going 220v?

I have a small shop that I work on my jeep in and it isn't wired for 220.
Plus, I'm not a big welder, I've had that craftsman for 2 years and only
used it once. What are some of the pro/cons with the 110v/220v?

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport

>

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>What are some of the pro/cons with the 110v/220v?

although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>What are some of the pro/cons with the 110v/220v?

although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>What are some of the pro/cons with the 110v/220v?

although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "HomeBrewer"

>What are some of the pro/cons with the 110v/220v?

although you can weld thicker base metals with the larger welder, the biggest
advantage of going big is that it gives you room to grow as a welder.

Re: FS: small wire feed 120v welder
 

MontanaJeeper did pass the time by typing:
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.

That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ass. You need the largest wall box you can
fit.

Always run the primary outlet (220) first then sister off for any 110 outlets.

http://tinyurl.com/7ya2c

Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.

In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.

--
DougW

Re: FS: small wire feed 120v welder
 

MontanaJeeper did pass the time by typing:
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.

That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ass. You need the largest wall box you can
fit.

Always run the primary outlet (220) first then sister off for any 110 outlets.

http://tinyurl.com/7ya2c

Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.

In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.

--
DougW

Re: FS: small wire feed 120v welder
 

MontanaJeeper did pass the time by typing:
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.

That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ass. You need the largest wall box you can
fit.

Always run the primary outlet (220) first then sister off for any 110 outlets.

http://tinyurl.com/7ya2c

Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.

In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.

--
DougW

Re: FS: small wire feed 120v welder
 

MontanaJeeper did pass the time by typing:
>> Subject: Re: FS: small wire feed 120v welder
>> From: "HomeBrewer"
>
>> What are some of the pro/cons with the 110v/220v?
>
> although you can weld thicker base metals with the larger welder, the biggest
> advantage of going big is that it gives you room to grow as a welder.

That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
give you a service max of 30A. If your going to weld super heavy metal with
a stick you probably would want a 40A service (8 Gauge). Running, bending, and
connecting 8ga is a real pain in the ass. You need the largest wall box you can
fit.

Always run the primary outlet (220) first then sister off for any 110 outlets.

http://tinyurl.com/7ya2c

Installed one in the garage just in case I get a welder and paired it up with a
20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
weed wacker, leaf blower.

In all cases you should either get a construction permit (with inspection) or
have a licensed electrician do the work. I had an electrician I know pull the
permit and do the inspection.

--
DougW

Re: FS: small wire feed 120v welder
 

I like that little disclaimer you tacked on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
> some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
> equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
> give you a service max of 30A. If your going to weld super heavy metal with
> a stick you probably would want a 40A service (8 Gauge). Running, bending, and
> connecting 8ga is a real pain in the ass. You need the largest wall box you can
> fit.
>
> Always run the primary outlet (220) first then sister off for any 110 outlets.
>
> http://tinyurl.com/7ya2c
>
> Installed one in the garage just in case I get a welder and paired it up with a
> 20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
> weed wacker, leaf blower.
>
> In all cases you should either get a construction permit (with inspection) or
> have a licensed electrician do the work. I had an electrician I know pull the
> permit and do the inspection.
>
> --
> DougW

Re: FS: small wire feed 120v welder
 

I like that little disclaimer you tacked on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
> some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
> equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
> give you a service max of 30A. If your going to weld super heavy metal with
> a stick you probably would want a 40A service (8 Gauge). Running, bending, and
> connecting 8ga is a real pain in the ass. You need the largest wall box you can
> fit.
>
> Always run the primary outlet (220) first then sister off for any 110 outlets.
>
> http://tinyurl.com/7ya2c
>
> Installed one in the garage just in case I get a welder and paired it up with a
> 20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
> weed wacker, leaf blower.
>
> In all cases you should either get a construction permit (with inspection) or
> have a licensed electrician do the work. I had an electrician I know pull the
> permit and do the inspection.
>
> --
> DougW

Re: FS: small wire feed 120v welder
 

I like that little disclaimer you tacked on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
> some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
> equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
> give you a service max of 30A. If your going to weld super heavy metal with
> a stick you probably would want a 40A service (8 Gauge). Running, bending, and
> connecting 8ga is a real pain in the ass. You need the largest wall box you can
> fit.
>
> Always run the primary outlet (220) first then sister off for any 110 outlets.
>
> http://tinyurl.com/7ya2c
>
> Installed one in the garage just in case I get a welder and paired it up with a
> 20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
> weed wacker, leaf blower.
>
> In all cases you should either get a construction permit (with inspection) or
> have a licensed electrician do the work. I had an electrician I know pull the
> permit and do the inspection.
>
> --
> DougW

Re: FS: small wire feed 120v welder
 

I like that little disclaimer you tacked on.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

DougW wrote:
>
> That and a 220 outlet isn't hard to install. It's just one double or ganged breaker,
> some 10-3 romex (red, black, white, ground), and a 220 outlet that will match your
> equipment. Some go with the standard dryer 220 then adapt. 10gauge wire will
> give you a service max of 30A. If your going to weld super heavy metal with
> a stick you probably would want a 40A service (8 Gauge). Running, bending, and
> connecting 8ga is a real pain in the ass. You need the largest wall box you can
> fit.
>
> Always run the primary outlet (220) first then sister off for any 110 outlets.
>
> http://tinyurl.com/7ya2c
>
> Installed one in the garage just in case I get a welder and paired it up with a
> 20A 110 outlet for the central heat and a 20A 110 GFCI outlet for running lamps,
> weed wacker, leaf blower.
>
> In all cases you should either get a construction permit (with inspection) or
> have a licensed electrician do the work. I had an electrician I know pull the
> permit and do the inspection.
>
> --
> DougW

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "DougW"

>Some go with the standard dryer 220 then adapt.

http://tinyurl.com/6csxz

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "DougW"

>Some go with the standard dryer 220 then adapt.

http://tinyurl.com/6csxz

Re: FS: small wire feed 120v welder
 

>Subject: Re: FS: small wire feed 120v welder
>From: "DougW"

>Some go with the standard dryer 220 then adapt.

http://tinyurl.com/6csxz