FS 76 CJ5 in Colorado
08-11-2003, 10:52 AM
#1
Guest
Posts: n/a
FS 76 CJ5 in Colorado
Hey All,
Looking to sell my 76 CJ5 that has 75,000 miles on it.
It needs a top and seats, I have the rods/pipes for the soft top and
the original floor mats. I also have an extra rim for the spare tire.
It is not rusted other than surface rust and the floor boards and
body mounts are fine.
Asking $2500 USD.
Here's a couple pictures I put up: http://www.grandshelters.com/jeep
Ed Huesers
http://www.grandshelters.com
Looking to sell my 76 CJ5 that has 75,000 miles on it.
It needs a top and seats, I have the rods/pipes for the soft top and
the original floor mats. I also have an extra rim for the spare tire.
It is not rusted other than surface rust and the floor boards and
body mounts are fine.
Asking $2500 USD.
Here's a couple pictures I put up: http://www.grandshelters.com/jeep
Ed Huesers
http://www.grandshelters.com
08-27-2003, 12:31 AM
#2
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
What engine does this have? Also, what is the condition of major running
gear?
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F37ADAE.42D8BECD@grandshelters.com...
> Hey All,
> Looking to sell my 76 CJ5 that has 75,000 miles on it.
> It needs a top and seats, I have the rods/pipes for the soft top and
> the original floor mats. I also have an extra rim for the spare tire.
> It is not rusted other than surface rust and the floor boards and
> body mounts are fine.
> Asking $2500 USD.
> Here's a couple pictures I put up: http://www.grandshelters.com/jeep
>
> Ed Huesers
> http://www.grandshelters.com
gear?
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F37ADAE.42D8BECD@grandshelters.com...
> Hey All,
> Looking to sell my 76 CJ5 that has 75,000 miles on it.
> It needs a top and seats, I have the rods/pipes for the soft top and
> the original floor mats. I also have an extra rim for the spare tire.
> It is not rusted other than surface rust and the floor boards and
> body mounts are fine.
> Asking $2500 USD.
> Here's a couple pictures I put up: http://www.grandshelters.com/jeep
>
> Ed Huesers
> http://www.grandshelters.com
08-27-2003, 12:31 AM
#3
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
What engine does this have? Also, what is the condition of major running
gear?
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F37ADAE.42D8BECD@grandshelters.com...
> Hey All,
> Looking to sell my 76 CJ5 that has 75,000 miles on it.
> It needs a top and seats, I have the rods/pipes for the soft top and
> the original floor mats. I also have an extra rim for the spare tire.
> It is not rusted other than surface rust and the floor boards and
> body mounts are fine.
> Asking $2500 USD.
> Here's a couple pictures I put up: http://www.grandshelters.com/jeep
>
> Ed Huesers
> http://www.grandshelters.com
gear?
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F37ADAE.42D8BECD@grandshelters.com...
> Hey All,
> Looking to sell my 76 CJ5 that has 75,000 miles on it.
> It needs a top and seats, I have the rods/pipes for the soft top and
> the original floor mats. I also have an extra rim for the spare tire.
> It is not rusted other than surface rust and the floor boards and
> body mounts are fine.
> Asking $2500 USD.
> Here's a couple pictures I put up: http://www.grandshelters.com/jeep
>
> Ed Huesers
> http://www.grandshelters.com
09-02-2003, 12:11 PM
#4
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
"Gerald G. McGeorge" wrote:
> What engine does this have? Also, what is the condition of major running
> gear?
The engine is the strait six [258 cu.in. I think] and the running
gear is nice and tight. The trany is one of those heavy ones with the
syncros that take a while for the gears to match up.
It's been long enough now that I'll drop the price to $2000 USD. Any
less than that and It's to good a toy and I'll keep it myself.
Ed Huesers
http://www.grandshelters.com
> Ed Huesers wrote:
> > Looking to sell my 76 CJ5 that has 75,000 miles on it.
> > It needs a top and seats, I have the rods/pipes for the soft top and
> > the original floor mats. I also have an extra rim for the spare tire.
> > It is not rusted other than surface rust and the floor boards and
> > body mounts are fine.
> > Asking $2500 USD.
> > Here's a couple pictures I put up: http://www.grandshelters.com/jeep
> >
> > Ed Huesers
> > http://www.grandshelters.com
09-02-2003, 12:11 PM
#5
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
"Gerald G. McGeorge" wrote:
> What engine does this have? Also, what is the condition of major running
> gear?
The engine is the strait six [258 cu.in. I think] and the running
gear is nice and tight. The trany is one of those heavy ones with the
syncros that take a while for the gears to match up.
It's been long enough now that I'll drop the price to $2000 USD. Any
less than that and It's to good a toy and I'll keep it myself.
Ed Huesers
http://www.grandshelters.com
> Ed Huesers wrote:
> > Looking to sell my 76 CJ5 that has 75,000 miles on it.
> > It needs a top and seats, I have the rods/pipes for the soft top and
> > the original floor mats. I also have an extra rim for the spare tire.
> > It is not rusted other than surface rust and the floor boards and
> > body mounts are fine.
> > Asking $2500 USD.
> > Here's a couple pictures I put up: http://www.grandshelters.com/jeep
> >
> > Ed Huesers
> > http://www.grandshelters.com
09-02-2003, 06:09 PM
#6
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
This vehicle is starting to look interesting. Unfortunately, other
commitments prevent me from buying it at this time. If it has a T18
transmission, somebody here ought to snap it up...
Earle
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F5513EF.8A2738FA@grandshelters.com...
> > > "Gerald G. McGeorge" wrote:
> > > > What engine does this have?
>
> > Ed Huesers wrote:
> > > The engine is the strait six [258 cu.in. I think]
>
> Lee Ayrton wrote:
> > There's an easy way to tell. Take a look at the machined pad on the
right
> > side of the block, between the #2 and #3 spark plugs. There should be a
> > 6-character "Engine Day Build Code" stamped there. If it is the
original
> > engine and the 4th character is a C, it is a 258. If it is an E it is a
> > 232 (same block, shorter stroke).
> > See: 2. AMC Engine codes
> > <URL:http://home.att.net/~farna/amtech/amcengcodes.htm>
>
> Thanks Lee,
> The number is 809E23. So looks like it's a 232 cu.in.
>
> Ed Huesers
> http://www.grandshelters.com
commitments prevent me from buying it at this time. If it has a T18
transmission, somebody here ought to snap it up...
Earle
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F5513EF.8A2738FA@grandshelters.com...
> > > "Gerald G. McGeorge" wrote:
> > > > What engine does this have?
>
> > Ed Huesers wrote:
> > > The engine is the strait six [258 cu.in. I think]
>
> Lee Ayrton wrote:
> > There's an easy way to tell. Take a look at the machined pad on the
right
> > side of the block, between the #2 and #3 spark plugs. There should be a
> > 6-character "Engine Day Build Code" stamped there. If it is the
original
> > engine and the 4th character is a C, it is a 258. If it is an E it is a
> > 232 (same block, shorter stroke).
> > See: 2. AMC Engine codes
> > <URL:http://home.att.net/~farna/amtech/amcengcodes.htm>
>
> Thanks Lee,
> The number is 809E23. So looks like it's a 232 cu.in.
>
> Ed Huesers
> http://www.grandshelters.com
09-02-2003, 06:09 PM
#7
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
This vehicle is starting to look interesting. Unfortunately, other
commitments prevent me from buying it at this time. If it has a T18
transmission, somebody here ought to snap it up...
Earle
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F5513EF.8A2738FA@grandshelters.com...
> > > "Gerald G. McGeorge" wrote:
> > > > What engine does this have?
>
> > Ed Huesers wrote:
> > > The engine is the strait six [258 cu.in. I think]
>
> Lee Ayrton wrote:
> > There's an easy way to tell. Take a look at the machined pad on the
right
> > side of the block, between the #2 and #3 spark plugs. There should be a
> > 6-character "Engine Day Build Code" stamped there. If it is the
original
> > engine and the 4th character is a C, it is a 258. If it is an E it is a
> > 232 (same block, shorter stroke).
> > See: 2. AMC Engine codes
> > <URL:http://home.att.net/~farna/amtech/amcengcodes.htm>
>
> Thanks Lee,
> The number is 809E23. So looks like it's a 232 cu.in.
>
> Ed Huesers
> http://www.grandshelters.com
commitments prevent me from buying it at this time. If it has a T18
transmission, somebody here ought to snap it up...
Earle
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F5513EF.8A2738FA@grandshelters.com...
> > > "Gerald G. McGeorge" wrote:
> > > > What engine does this have?
>
> > Ed Huesers wrote:
> > > The engine is the strait six [258 cu.in. I think]
>
> Lee Ayrton wrote:
> > There's an easy way to tell. Take a look at the machined pad on the
right
> > side of the block, between the #2 and #3 spark plugs. There should be a
> > 6-character "Engine Day Build Code" stamped there. If it is the
original
> > engine and the 4th character is a C, it is a 258. If it is an E it is a
> > 232 (same block, shorter stroke).
> > See: 2. AMC Engine codes
> > <URL:http://home.att.net/~farna/amtech/amcengcodes.htm>
>
> Thanks Lee,
> The number is 809E23. So looks like it's a 232 cu.in.
>
> Ed Huesers
> http://www.grandshelters.com
09-03-2003, 09:28 AM
#8
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
Earle Horton wrote:
> This vehicle is starting to look interesting. Unfortunately, other
> commitments prevent me from buying it at this time. If it has a T18
> transmission, somebody here ought to snap it up...
I don't know this one [trany] for sure either, it shifts like the
grain trucks I used to drive as a kid is all I know. It's heavy duty.
Ed Huesers
http://www.grandshelters.com
09-03-2003, 09:28 AM
#9
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
Earle Horton wrote:
> This vehicle is starting to look interesting. Unfortunately, other
> commitments prevent me from buying it at this time. If it has a T18
> transmission, somebody here ought to snap it up...
I don't know this one [trany] for sure either, it shifts like the
grain trucks I used to drive as a kid is all I know. It's heavy duty.
Ed Huesers
http://www.grandshelters.com
09-03-2003, 10:17 AM
#10
Guest
Posts: n/a
Re: FS 76 CJ5 in Colorado
"Ed Huesers" <ed@grandshelters.com> wrote in message
news:3F55EC78.A488588D@grandshelters.com...
>
>
> Earle Horton wrote:
> > This vehicle is starting to look interesting. Unfortunately, other
> > commitments prevent me from buying it at this time. If it has a T18
> > transmission, somebody here ought to snap it up...
>
> I don't know this one [trany] for sure either, it shifts like the
> grain trucks I used to drive as a kid is all I know. It's heavy duty.
>
Cut that out! I want it. :o(
Earle
news:3F55EC78.A488588D@grandshelters.com...
>
>
> Earle Horton wrote:
> > This vehicle is starting to look interesting. Unfortunately, other
> > commitments prevent me from buying it at this time. If it has a T18
> > transmission, somebody here ought to snap it up...
>
> I don't know this one [trany] for sure either, it shifts like the
> grain trucks I used to drive as a kid is all I know. It's heavy duty.
>
Cut that out! I want it. :o(
Earle