Yeah it was two separate shops, one for the ball joint and one for the
alignment. Had the truck inspected prior to the ball joint being replaced
(thats how I found out) then they inspected it again when I had it aligned.
\

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460928bd$0$18166$9a6e19ea@unlimited.newshosti ng.com...
> That's what they told you eh....
>
> Maybe they changed the wrong one?
>
> If the bearing is indeed loose after a job like that, then maybe the
> forgot to put the axle nut on or maybe they are just plain incompetent.
>
> Mike
>
> abomb69 wrote:
>> No I had the ball joint fixed a day before the alignment.
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46082b18$0$5683$9a6e19ea@unlimited.newshostin g.com...
>>> abomb69 wrote:
>>>> I have a 93 jeep cherokee, I have had the front end inspected, the
>>>> upper driver side ball join replaced. I got the front end aligned. Now
>>>> the right front wheel toes out at the bottom, I do have a broken
>>>> stabilizer bar bushing on the right side. What would cause the wheel to
>>>> appear to be toed out?
>>> The alignment could have been set with the bad ball joint. Having the
>>> new one in changes the length across the front.
>>>
>>> If it is only out at the bottom, you have a bad ball joint.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>

 

Yeah it was two separate shops, one for the ball joint and one for the
alignment. Had the truck inspected prior to the ball joint being replaced
(thats how I found out) then they inspected it again when I had it aligned.
\

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:460928bd$0$18166$9a6e19ea@unlimited.newshosti ng.com...
> That's what they told you eh....
>
> Maybe they changed the wrong one?
>
> If the bearing is indeed loose after a job like that, then maybe the
> forgot to put the axle nut on or maybe they are just plain incompetent.
>
> Mike
>
> abomb69 wrote:
>> No I had the ball joint fixed a day before the alignment.
>>
>> "Mike Romain" <romainm@sympatico.ca> wrote in message
>> news:46082b18$0$5683$9a6e19ea@unlimited.newshostin g.com...
>>> abomb69 wrote:
>>>> I have a 93 jeep cherokee, I have had the front end inspected, the
>>>> upper driver side ball join replaced. I got the front end aligned. Now
>>>> the right front wheel toes out at the bottom, I do have a broken
>>>> stabilizer bar bushing on the right side. What would cause the wheel to
>>>> appear to be toed out?
>>> The alignment could have been set with the bad ball joint. Having the
>>> new one in changes the length across the front.
>>>
>>> If it is only out at the bottom, you have a bad ball joint.
>>>
>>> Mike
>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>> 88 Cherokee 235 BFG AT's
>>> Canadian Off Road Trips Photos: Non members can still view!
>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>> (More Off Road album links at bottom of the view page)
>>>
>>