Frame repair pics
10-29-2004, 06:22 PM
#1
Guest
Posts: n/a
Frame repair pics
Well I finally cut and repaired the rusted area of my frame. Take a look at
the pics and let me know if I screwed anything up!
I decided not to put the crossmember "over" the ends of the frame, and
instead built it between. I hoped leaving it open would help it drain in the
future. Mistake?... thoughts....?
Now I will make my rear body mounts out of some thick angle iron or
something along those lines. I'm doing a YJ tub, so the holes had to be
moved anyway.
This was my first "real" project with my welder. Thanksfully I had a friend
helping out.
A few before and after pics...
http://www.geocities.com/co_big_cheese/misc/
the pics and let me know if I screwed anything up!
I decided not to put the crossmember "over" the ends of the frame, and
instead built it between. I hoped leaving it open would help it drain in the
future. Mistake?... thoughts....?
Now I will make my rear body mounts out of some thick angle iron or
something along those lines. I'm doing a YJ tub, so the holes had to be
moved anyway.
This was my first "real" project with my welder. Thanksfully I had a friend
helping out.
A few before and after pics...
http://www.geocities.com/co_big_cheese/misc/
10-29-2004, 06:32 PM
#2
Guest
Posts: n/a
Re: Frame repair pics
Wanna come do mine?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
10-29-2004, 06:32 PM
#3
Guest
Posts: n/a
Re: Frame repair pics
Wanna come do mine?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
10-29-2004, 06:32 PM
#4
Guest
Posts: n/a
Re: Frame repair pics
Wanna come do mine?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Kevin S wrote:
>
> Well I finally cut and repaired the rusted area of my frame. Take a look at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
10-30-2004, 09:31 AM
#5
Guest
Posts: n/a
Re: Frame repair pics
If mine had looked that good before I started I wouldn't of done mine.
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
10-30-2004, 09:31 AM
#6
Guest
Posts: n/a
Re: Frame repair pics
If mine had looked that good before I started I wouldn't of done mine.
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
10-30-2004, 09:31 AM
#7
Guest
Posts: n/a
Re: Frame repair pics
If mine had looked that good before I started I wouldn't of done mine.
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:pmzgd.11$Ki7.3950@news.uswest.net...
> Well I finally cut and repaired the rusted area of my frame. Take a look
> at
> the pics and let me know if I screwed anything up!
>
> I decided not to put the crossmember "over" the ends of the frame, and
> instead built it between. I hoped leaving it open would help it drain in
> the
> future. Mistake?... thoughts....?
>
> Now I will make my rear body mounts out of some thick angle iron or
> something along those lines. I'm doing a YJ tub, so the holes had to be
> moved anyway.
>
> This was my first "real" project with my welder. Thanksfully I had a
> friend
> helping out.
>
> A few before and after pics...
> http://www.geocities.com/co_big_cheese/misc/
>
>
10-30-2004, 09:55 AM
#8
Guest
Posts: n/a
Re: Frame repair pics
Not bad for a first project...career change?
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
10-30-2004, 09:55 AM
#9
Guest
Posts: n/a
Re: Frame repair pics
Not bad for a first project...career change?
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
10-30-2004, 09:55 AM
#10
Guest
Posts: n/a
Re: Frame repair pics
Not bad for a first project...career change?
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
Mike Romain wrote:
> Wanna come do mine?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Kevin S wrote:
>
>>Well I finally cut and repaired the rusted area of my frame. Take a look at
>>the pics and let me know if I screwed anything up!
>>
>>I decided not to put the crossmember "over" the ends of the frame, and
>>instead built it between. I hoped leaving it open would help it drain in the
>>future. Mistake?... thoughts....?
>>
>>Now I will make my rear body mounts out of some thick angle iron or
>>something along those lines. I'm doing a YJ tub, so the holes had to be
>>moved anyway.
>>
>>This was my first "real" project with my welder. Thanksfully I had a friend
>>helping out.
>>
>>A few before and after pics...
>>http://www.geocities.com/co_big_cheese/misc/
--
__________________________________________________ _________
tw
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport
There is a very fine line between "hobby" and "mental illness."
-- Dave Barry
Pronunciation: 'jEp
Function: noun
Date: 1940
Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________
