Ford 8.8 Dino Gear and not Synth
Guest
Posts: n/a
Ford 8.8 Dino Gear and not Synth
Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
I found a tag that had broken off that says to use Synth 75w-140 only on
it.. I only put 200 miles on the rear diff... When I had opened it up
everything looked fine.. The ring gear didn't even show any signs of wear...
I am just wondering about the bearings or seals... Did I totally mess up
this rear diff or am I ok.... Would it be ok to run reg dino lube or should
I use the synth stuff...
Thanks,
Ben
95 YJ 2.5L
I found a tag that had broken off that says to use Synth 75w-140 only on
it.. I only put 200 miles on the rear diff... When I had opened it up
everything looked fine.. The ring gear didn't even show any signs of wear...
I am just wondering about the bearings or seals... Did I totally mess up
this rear diff or am I ok.... Would it be ok to run reg dino lube or should
I use the synth stuff...
Thanks,
Ben
95 YJ 2.5L
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
I would use what is called for. They might have the tolerances really
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
I would use what is called for. They might have the tolerances really
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
I would use what is called for. They might have the tolerances really
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
I would use what is called for. They might have the tolerances really
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
tight and need the lighter fluid.
At least it isn't something that needs changing often.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Ben wrote:
>
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
warmed up. That it ran with 85W when it was warming up instead of the
very slightly thinner 75W viscosity is no big deal unless the weather
where you live has been below zero and even then, it would not be
anything to worry about. No problem, they're not as fussy on their
viscosities as engines are.
Jerry
Ben wrote:
> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8 when
> I found a tag that had broken off that says to use Synth 75w-140 only on
> it.. I only put 200 miles on the rear diff... When I had opened it up
> everything looked fine.. The ring gear didn't even show any signs of wear...
> I am just wondering about the bearings or seals... Did I totally mess up
> this rear diff or am I ok.... Would it be ok to run reg dino lube or should
> I use the synth stuff...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ford 8.8 Dino Gear and not Synth
Yeah.. I live in South Carolina so if it gets that cold here.. people would
freeze to death.. LOL.. Yeah.. I didn't think it would have hurt anything..
But I just wanted to make sure... I am going to put what it calls for back
in it just to be on the safe side..
Thanks for the info
Ben
95 YJ 2.5L
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:30uke.2732$tp.28@fed1read05...
> Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
> warmed up. That it ran with 85W when it was warming up instead of the
> very slightly thinner 75W viscosity is no big deal unless the weather
> where you live has been below zero and even then, it would not be anything
> to worry about. No problem, they're not as fussy on their viscosities as
> engines are.
>
> Jerry
>
> Ben wrote:
>> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8
>> when I found a tag that had broken off that says to use Synth 75w-140
>> only on it.. I only put 200 miles on the rear diff... When I had opened
>> it up everything looked fine.. The ring gear didn't even show any signs
>> of wear... I am just wondering about the bearings or seals... Did I
>> totally mess up this rear diff or am I ok.... Would it be ok to run reg
>> dino lube or should I use the synth stuff...
>>
>> Thanks,
>>
>> Ben
>> 95 YJ 2.5L
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
freeze to death.. LOL.. Yeah.. I didn't think it would have hurt anything..
But I just wanted to make sure... I am going to put what it calls for back
in it just to be on the safe side..
Thanks for the info
Ben
95 YJ 2.5L
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:30uke.2732$tp.28@fed1read05...
> Both 85W-140 and 75W-140 run at the same exact 140 viscosity when when
> warmed up. That it ran with 85W when it was warming up instead of the
> very slightly thinner 75W viscosity is no big deal unless the weather
> where you live has been below zero and even then, it would not be anything
> to worry about. No problem, they're not as fussy on their viscosities as
> engines are.
>
> Jerry
>
> Ben wrote:
>> Well.. I found out today that I had put 85w-140 gear oil in my Ford 8.8
>> when I found a tag that had broken off that says to use Synth 75w-140
>> only on it.. I only put 200 miles on the rear diff... When I had opened
>> it up everything looked fine.. The ring gear didn't even show any signs
>> of wear... I am just wondering about the bearings or seals... Did I
>> totally mess up this rear diff or am I ok.... Would it be ok to run reg
>> dino lube or should I use the synth stuff...
>>
>> Thanks,
>>
>> Ben
>> 95 YJ 2.5L
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
