Flitz, any opinions?
01-09-2006, 05:39 PM
#21
Guest
Posts: n/a
Re: Flitz, any opinions?
You use Fram filters? <gasp>
"DougW" <post.replies@invalid.address> wrote in message
news:HfAwf.41727$---.15466@dukeread07...
> Ok..
> I've used this stuff on lots of things.. Just wish I would have
> taken some before picks. :/ Oh well.
>
> On the wheel (manually rubbing) Still have yet to get a buff-ball thingy.
> The two spokes closer to you vs the one on the left. In the sun it's more
> apparent that the yellow tinge is also missing.
> http://www.revbeergoggles.com/temp/flitz-wheel.jpg
>
> Here is an interesting bit. I did the pulley on the supercharger
> just to see what this stuff would do to a basically unprepared surface.
> Not too shabby.
> http://www.revbeergoggles.com/temp/flitz-pre-pulley.jpg
> http://www.revbeergoggles.com/temp/flitz-pulley.jpg
>
> And this is BLING baby!
> http://www.revbeergoggles.com/temp/filtz-radcap.jpg
>
> ok.. Jeep bling.. :) shiny parts, and not just the top of my noggin
> either. :]
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
"DougW" <post.replies@invalid.address> wrote in message
news:HfAwf.41727$---.15466@dukeread07...
> Ok..
> I've used this stuff on lots of things.. Just wish I would have
> taken some before picks. :/ Oh well.
>
> On the wheel (manually rubbing) Still have yet to get a buff-ball thingy.
> The two spokes closer to you vs the one on the left. In the sun it's more
> apparent that the yellow tinge is also missing.
> http://www.revbeergoggles.com/temp/flitz-wheel.jpg
>
> Here is an interesting bit. I did the pulley on the supercharger
> just to see what this stuff would do to a basically unprepared surface.
> Not too shabby.
> http://www.revbeergoggles.com/temp/flitz-pre-pulley.jpg
> http://www.revbeergoggles.com/temp/flitz-pulley.jpg
>
> And this is BLING baby!
> http://www.revbeergoggles.com/temp/filtz-radcap.jpg
>
> ok.. Jeep bling.. :) shiny parts, and not just the top of my noggin
> either. :]
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
01-09-2006, 05:39 PM
#22
Guest
Posts: n/a
Re: Flitz, any opinions?
You use Fram filters? <gasp>
"DougW" <post.replies@invalid.address> wrote in message
news:HfAwf.41727$---.15466@dukeread07...
> Ok..
> I've used this stuff on lots of things.. Just wish I would have
> taken some before picks. :/ Oh well.
>
> On the wheel (manually rubbing) Still have yet to get a buff-ball thingy.
> The two spokes closer to you vs the one on the left. In the sun it's more
> apparent that the yellow tinge is also missing.
> http://www.revbeergoggles.com/temp/flitz-wheel.jpg
>
> Here is an interesting bit. I did the pulley on the supercharger
> just to see what this stuff would do to a basically unprepared surface.
> Not too shabby.
> http://www.revbeergoggles.com/temp/flitz-pre-pulley.jpg
> http://www.revbeergoggles.com/temp/flitz-pulley.jpg
>
> And this is BLING baby!
> http://www.revbeergoggles.com/temp/filtz-radcap.jpg
>
> ok.. Jeep bling.. :) shiny parts, and not just the top of my noggin
> either. :]
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
"DougW" <post.replies@invalid.address> wrote in message
news:HfAwf.41727$---.15466@dukeread07...
> Ok..
> I've used this stuff on lots of things.. Just wish I would have
> taken some before picks. :/ Oh well.
>
> On the wheel (manually rubbing) Still have yet to get a buff-ball thingy.
> The two spokes closer to you vs the one on the left. In the sun it's more
> apparent that the yellow tinge is also missing.
> http://www.revbeergoggles.com/temp/flitz-wheel.jpg
>
> Here is an interesting bit. I did the pulley on the supercharger
> just to see what this stuff would do to a basically unprepared surface.
> Not too shabby.
> http://www.revbeergoggles.com/temp/flitz-pre-pulley.jpg
> http://www.revbeergoggles.com/temp/flitz-pulley.jpg
>
> And this is BLING baby!
> http://www.revbeergoggles.com/temp/filtz-radcap.jpg
>
> ok.. Jeep bling.. :) shiny parts, and not just the top of my noggin
> either. :]
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
>
01-09-2006, 06:04 PM
#26
Guest
Posts: n/a
Re: Flitz, any opinions?
I used them regularly up till a few years ago. There are a couple reports
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
01-09-2006, 06:04 PM
#27
Guest
Posts: n/a
Re: Flitz, any opinions?
I used them regularly up till a few years ago. There are a couple reports
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
01-09-2006, 06:04 PM
#28
Guest
Posts: n/a
Re: Flitz, any opinions?
I used them regularly up till a few years ago. There are a couple reports
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
that indicate a drop in filter area but if you change filters often (3k) it
may not be significant.
"DougW" <post.replies@invalid.address> wrote in message
news:9QBwf.41742$---.10007@dukeread07...
> billy ray did pass the time by typing:
>> You use Fram filters? <gasp>
>
> I've used fram air filters for a long time.
> Don't see any dirt/dust in the intake so they
> must work.
>
> --
> DougW
>
01-09-2006, 06:31 PM
#29
Guest
Posts: n/a
Re: Flitz, any opinions?
billy ray did pass the time by typing:
> I used them regularly up till a few years ago. There are a couple reports
> that indicate a drop in filter area but if you change filters often (3k) it
> may not be significant.
Yea.. I blow the filters out every week and replace them at about 3k. Generally
pick up a case of filters every so often. It's cheaper than buying them one at a time.
rockauto.com has good prices and every so often I can get a deal with NAPA.
Down to my last four filters.
--
DougW
> I used them regularly up till a few years ago. There are a couple reports
> that indicate a drop in filter area but if you change filters often (3k) it
> may not be significant.
Yea.. I blow the filters out every week and replace them at about 3k. Generally
pick up a case of filters every so often. It's cheaper than buying them one at a time.
rockauto.com has good prices and every so often I can get a deal with NAPA.
Down to my last four filters.
--
DougW
01-09-2006, 06:31 PM
#30
Guest
Posts: n/a
Re: Flitz, any opinions?
billy ray did pass the time by typing:
> I used them regularly up till a few years ago. There are a couple reports
> that indicate a drop in filter area but if you change filters often (3k) it
> may not be significant.
Yea.. I blow the filters out every week and replace them at about 3k. Generally
pick up a case of filters every so often. It's cheaper than buying them one at a time.
rockauto.com has good prices and every so often I can get a deal with NAPA.
Down to my last four filters.
--
DougW
> I used them regularly up till a few years ago. There are a couple reports
> that indicate a drop in filter area but if you change filters often (3k) it
> may not be significant.
Yea.. I blow the filters out every week and replace them at about 3k. Generally
pick up a case of filters every so often. It's cheaper than buying them one at a time.
rockauto.com has good prices and every so often I can get a deal with NAPA.
Down to my last four filters.
--
DougW
