Mike Romain

That's what I am wondering too.... I do have a small wire feed welder
and am 'half' decent with it...

Mike

"L.W.(ßill) ------ III" wrote:
>
> Be a far better welder than I.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Mike Romain wrote:
> >
> > When you say 'welded a nut on', do you mean on the spot where the old
> > bolt snapped?
> >
> > A friend just snapped one bolt trying to remove the shock and it sure
> > looks like the other is going to snap.
> >
> > Welding a nut on and using a short bolt would sure beat trying to drill
> > out and tap that sucker, hmm.....
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's

aGraham

How about that British guy who sold everything, including his clothes, I
think he ended up with $112K and put it on one bet and won.

In article <40BE3707.2C4A22D@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:

> We watch someone put his home on it a couple of months ago, and
> double it. I bet he's lost them by now.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ISellJeeps wrote:
> >
> > congrats!
> > Have a safe trip & put 20 on red for me!
> >
> > --
> > Jarod Sprauer
> > www.sprauermotorsports.com
> > 281-807-JEEP (5337)

--
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)

aGraham

How about that British guy who sold everything, including his clothes, I
think he ended up with $112K and put it on one bet and won.

In article <40BE3707.2C4A22D@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:

> We watch someone put his home on it a couple of months ago, and
> double it. I bet he's lost them by now.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ISellJeeps wrote:
> >
> > congrats!
> > Have a safe trip & put 20 on red for me!
> >
> > --
> > Jarod Sprauer
> > www.sprauermotorsports.com
> > 281-807-JEEP (5337)

--
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)

aGraham

How about that British guy who sold everything, including his clothes, I
think he ended up with $112K and put it on one bet and won.

In article <40BE3707.2C4A22D@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:

> We watch someone put his home on it a couple of months ago, and
> double it. I bet he's lost them by now.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ISellJeeps wrote:
> >
> > congrats!
> > Have a safe trip & put 20 on red for me!
> >
> > --
> > Jarod Sprauer
> > www.sprauermotorsports.com
> > 281-807-JEEP (5337)

--
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)

aGraham

How about that British guy who sold everything, including his clothes, I
think he ended up with $112K and put it on one bet and won.

In article <40BE3707.2C4A22D@***.net>,
L.W.(ßill) ------ III <----------@***.net> wrote:

> We watch someone put his home on it a couple of months ago, and
> double it. I bet he's lost them by now.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ISellJeeps wrote:
> >
> > congrats!
> > Have a safe trip & put 20 on red for me!
> >
> > --
> > Jarod Sprauer
> > www.sprauermotorsports.com
> > 281-807-JEEP (5337)

--
o_o_o_o
/| ,[_____],
|¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)

Bob

While I don't know for sure what he meant, either, I thought he meant
he welded a nut onto the sheared bolt stud in order to be able to put
a socket on it and back it out. Not that he welded a nut onto the
mount location. I didn't get the idea that his threads were screwed
up, just that the bolt was sheered.

/Bob


Mike Romain <romainm@sympatico.ca> wrote in message news:<40BE3498.5DBB28B8@sympatico.ca>...
> When you say 'welded a nut on', do you mean on the spot where the old
> bolt snapped?
>
> A friend just snapped one bolt trying to remove the shock and it sure
> looks like the other is going to snap.
>
> Welding a nut on and using a short bolt would sure beat trying to drill
> out and tap that sucker, hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Kevin S." wrote:
> >
> > OK I haven't posted anything on here about this problem, but it was making
> > me crazy the week or so. And since I'm driving it 500 miles to Vegas
> > tomorrow, I figured I better figure it out before it drove me batty. 00 XJ
> > BTW
> >
> > Had a banging/clanking noise coming from the rear everytime I hit a bump.
> >
> > I tightened my spare tire carier (it had been loose in the past and made a
> > similar noise)... didn't fix the problem
> >
> > Found that the rear grab handle for shutting the hatch was loose...
> > tightened it... didn't fix the problem
> >
> > Got a friend to drive while I sat in back to better pinpoint the location of
> > the noise.... sounded as if it was actually coming from under the
> > floorboard. Got under there and looked, didn't see anything wrong at first,
> > until my friend bounced on the bumper..... rear DS shock was moving a few
> > inches and hitting the floor board. One of the two bolts holding it had
> > broken off.
> >
> > Welded a nut on, backed the old bolt out, and put a new one in... NO MORE
> > NOISE!
> >
> > Just had to share.... sometimes it feels good to fix something thats been
> > making you crazy.

Bob

While I don't know for sure what he meant, either, I thought he meant
he welded a nut onto the sheared bolt stud in order to be able to put
a socket on it and back it out. Not that he welded a nut onto the
mount location. I didn't get the idea that his threads were screwed
up, just that the bolt was sheered.

/Bob


Mike Romain <romainm@sympatico.ca> wrote in message news:<40BE3498.5DBB28B8@sympatico.ca>...
> When you say 'welded a nut on', do you mean on the spot where the old
> bolt snapped?
>
> A friend just snapped one bolt trying to remove the shock and it sure
> looks like the other is going to snap.
>
> Welding a nut on and using a short bolt would sure beat trying to drill
> out and tap that sucker, hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Kevin S." wrote:
> >
> > OK I haven't posted anything on here about this problem, but it was making
> > me crazy the week or so. And since I'm driving it 500 miles to Vegas
> > tomorrow, I figured I better figure it out before it drove me batty. 00 XJ
> > BTW
> >
> > Had a banging/clanking noise coming from the rear everytime I hit a bump.
> >
> > I tightened my spare tire carier (it had been loose in the past and made a
> > similar noise)... didn't fix the problem
> >
> > Found that the rear grab handle for shutting the hatch was loose...
> > tightened it... didn't fix the problem
> >
> > Got a friend to drive while I sat in back to better pinpoint the location of
> > the noise.... sounded as if it was actually coming from under the
> > floorboard. Got under there and looked, didn't see anything wrong at first,
> > until my friend bounced on the bumper..... rear DS shock was moving a few
> > inches and hitting the floor board. One of the two bolts holding it had
> > broken off.
> >
> > Welded a nut on, backed the old bolt out, and put a new one in... NO MORE
> > NOISE!
> >
> > Just had to share.... sometimes it feels good to fix something thats been
> > making you crazy.

Bob

While I don't know for sure what he meant, either, I thought he meant
he welded a nut onto the sheared bolt stud in order to be able to put
a socket on it and back it out. Not that he welded a nut onto the
mount location. I didn't get the idea that his threads were screwed
up, just that the bolt was sheered.

/Bob


Mike Romain <romainm@sympatico.ca> wrote in message news:<40BE3498.5DBB28B8@sympatico.ca>...
> When you say 'welded a nut on', do you mean on the spot where the old
> bolt snapped?
>
> A friend just snapped one bolt trying to remove the shock and it sure
> looks like the other is going to snap.
>
> Welding a nut on and using a short bolt would sure beat trying to drill
> out and tap that sucker, hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Kevin S." wrote:
> >
> > OK I haven't posted anything on here about this problem, but it was making
> > me crazy the week or so. And since I'm driving it 500 miles to Vegas
> > tomorrow, I figured I better figure it out before it drove me batty. 00 XJ
> > BTW
> >
> > Had a banging/clanking noise coming from the rear everytime I hit a bump.
> >
> > I tightened my spare tire carier (it had been loose in the past and made a
> > similar noise)... didn't fix the problem
> >
> > Found that the rear grab handle for shutting the hatch was loose...
> > tightened it... didn't fix the problem
> >
> > Got a friend to drive while I sat in back to better pinpoint the location of
> > the noise.... sounded as if it was actually coming from under the
> > floorboard. Got under there and looked, didn't see anything wrong at first,
> > until my friend bounced on the bumper..... rear DS shock was moving a few
> > inches and hitting the floor board. One of the two bolts holding it had
> > broken off.
> >
> > Welded a nut on, backed the old bolt out, and put a new one in... NO MORE
> > NOISE!
> >
> > Just had to share.... sometimes it feels good to fix something thats been
> > making you crazy.

Bob

While I don't know for sure what he meant, either, I thought he meant
he welded a nut onto the sheared bolt stud in order to be able to put
a socket on it and back it out. Not that he welded a nut onto the
mount location. I didn't get the idea that his threads were screwed
up, just that the bolt was sheered.

/Bob


Mike Romain <romainm@sympatico.ca> wrote in message news:<40BE3498.5DBB28B8@sympatico.ca>...
> When you say 'welded a nut on', do you mean on the spot where the old
> bolt snapped?
>
> A friend just snapped one bolt trying to remove the shock and it sure
> looks like the other is going to snap.
>
> Welding a nut on and using a short bolt would sure beat trying to drill
> out and tap that sucker, hmm.....
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> "Kevin S." wrote:
> >
> > OK I haven't posted anything on here about this problem, but it was making
> > me crazy the week or so. And since I'm driving it 500 miles to Vegas
> > tomorrow, I figured I better figure it out before it drove me batty. 00 XJ
> > BTW
> >
> > Had a banging/clanking noise coming from the rear everytime I hit a bump.
> >
> > I tightened my spare tire carier (it had been loose in the past and made a
> > similar noise)... didn't fix the problem
> >
> > Found that the rear grab handle for shutting the hatch was loose...
> > tightened it... didn't fix the problem
> >
> > Got a friend to drive while I sat in back to better pinpoint the location of
> > the noise.... sounded as if it was actually coming from under the
> > floorboard. Got under there and looked, didn't see anything wrong at first,
> > until my friend bounced on the bumper..... rear DS shock was moving a few
> > inches and hitting the floor board. One of the two bolts holding it had
> > broken off.
> >
> > Welded a nut on, backed the old bolt out, and put a new one in... NO MORE
> > NOISE!
> >
> > Just had to share.... sometimes it feels good to fix something thats been
> > making you crazy.