Final exhaust system solution
#71
Guest
Posts: n/a
Re: Final exhaust system solution
Damn, I didn't notice that either.
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
#72
Guest
Posts: n/a
Re: Final exhaust system solution
Damn, I didn't notice that either.
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
#73
Guest
Posts: n/a
Re: Final exhaust system solution
Damn, I didn't notice that either.
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
Chris
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:3FB937A3.5B57113D@***.net...
> Except they run two ports into one, I wouldn't wish that on my
> worst enemy.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
#74
Guest
Posts: n/a
Re: Final exhaust system solution
On Mon, 17 Nov 2003 16:48:09 -0600, "c" <c@me.org> shared the
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#75
Guest
Posts: n/a
Re: Final exhaust system solution
On Mon, 17 Nov 2003 16:48:09 -0600, "c" <c@me.org> shared the
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#76
Guest
Posts: n/a
Re: Final exhaust system solution
On Mon, 17 Nov 2003 16:48:09 -0600, "c" <c@me.org> shared the
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
following:
>Damn, I didn't notice that either.
>
>Chris
Hey, thanks for trying to help, anyway. I'll bet if they make those
that exit between the frame-rails that they make some that have all 4
tubes that exit between the frame rails. I've already got about $500
in the exhaust so I think I'll run with what I have for right now. I
can't think of a good way to explain to my wife that I'm going to
replace the headers that have about 150 miles on them with another set
and then pay someone to do the tube bending for me again to hook them
into the next set. ;-) Let's just hope that CRWLR isn't right about
my tubes getting all smashed up and bent up. Hey, I know! I'll just
make sure I only drive the Jeep on paved roads and I should be safe!
*retarded grin* Think again, Batman. :-D
>
>
>"L.W. (ßill) ------ III" <----------@***.net> wrote in message
>news:3FB937A3.5B57113D@***.net...
>> Except they run two ports into one, I wouldn't wish that on my
>> worst enemy.
>> God Bless America, ßill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> c wrote:
>> >
>> > Hey Travis,
>> >
>> > Hedman makes the under chassis headers for your Jeep. The part number is
>> > 99200 and they are available from Summit for $120. There are some
>footnotes
>> > about installation and fit, so you'll have to read those to make sure
>that
>> > they are going to work for you should you go that route in the future.
>> >
>> > http://store.summitracing.com/partde...rt=HED%2D99200
>> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
>> >
>> > Fitment footnotes:
>> > http://www.hedman.com/pages/footnotes.html
>> >
>> > Chris
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!
#77
Guest
Posts: n/a
Re: Final exhaust system solution
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
#78
Guest
Posts: n/a
Re: Final exhaust system solution
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
#79
Guest
Posts: n/a
Re: Final exhaust system solution
> c wrote:
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
> >
> > Hey Travis,
> >
> > Hedman makes the under chassis headers for your Jeep. The part number is
> > 99200 and they are available from Summit for $120. There are some
footnotes
> > about installation and fit, so you'll have to read those to make sure
that
> > they are going to work for you should you go that route in the future.
> >
> > http://store.summitracing.com/partde...rt=HED%2D99200
> > http://www.hedman.com/pages/hedders/truk4wd-jeep.html
> >
> > Fitment footnotes:
> > http://www.hedman.com/pages/footnotes.html
> >
> > Chris
OK here are some other options for what its worth:
http://www.thorleyheaders.com/jeep_headers.html
http://www.holley.com/HiOctn/ProdLin.../Comp.html#AMC (9403
is the chassis version)
http://www.pacesetterexhaust.com/jeep.htm (not sure if these are fenderwell
or not)
Chris
#80
Guest
Posts: n/a
Re: Final exhaust system solution
In article <3FB94783.3E98D353@***.net>,
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> Me thinks you're turning green with envy.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>CRWLR wrote:
>>
>> I hate to be so negative on you Travis, but your pipes are well exposed and
>> ripe for getting torn to shreds, or smashed flat.
Or purple with all those responses. I would be out of breath. :)
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> Me thinks you're turning green with envy.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>CRWLR wrote:
>>
>> I hate to be so negative on you Travis, but your pipes are well exposed and
>> ripe for getting torn to shreds, or smashed flat.
Or purple with all those responses. I would be out of breath. :)
--
<html><form><input type crash></form></html>
nospam@zero.com Replace nospam with jetta to reply via e-mail