fender flare backing plate xj
09-03-2005, 09:58 AM
#1
Guest
Posts: n/a
fender flare backing plate xj
Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
antenna I already broke off a few of the bolts that hold the flares on.
Beforer i rip into the flares to get at rocker panels does anyone know where
to get the backing plate with studs? Or has anyone just broke them off and
put a bolt in and weld in place to repair?
Thanks
Tom
antenna I already broke off a few of the bolts that hold the flares on.
Beforer i rip into the flares to get at rocker panels does anyone know where
to get the backing plate with studs? Or has anyone just broke them off and
put a bolt in and weld in place to repair?
Thanks
Tom
09-04-2005, 09:55 PM
#2
Guest
Posts: n/a
Re: fender flare backing plate xj
I tried welding them but no luck with a stick. Plates are galvanized as
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
09-04-2005, 09:55 PM
#3
Guest
Posts: n/a
Re: fender flare backing plate xj
I tried welding them but no luck with a stick. Plates are galvanized as
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
09-04-2005, 09:55 PM
#4
Guest
Posts: n/a
Re: fender flare backing plate xj
I tried welding them but no luck with a stick. Plates are galvanized as
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
09-04-2005, 09:55 PM
#5
Guest
Posts: n/a
Re: fender flare backing plate xj
I tried welding them but no luck with a stick. Plates are galvanized as
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
well. I ended up replacing mine from the dealer at a great price (thanks
Wayne) but they are scarce.
-Brian
"TF" <flannery16@insightbb.com> wrote in message
news:QZhSe.325112$xm3.253557@attbi_s21...
> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
> antenna I already broke off a few of the bolts that hold the flares on.
> Beforer i rip into the flares to get at rocker panels does anyone know
> where to get the backing plate with studs? Or has anyone just broke them
> off and put a bolt in and weld in place to repair?
>
> Thanks
> Tom
>
09-08-2005, 07:34 PM
#6
Guest
Posts: n/a
Re: fender flare backing plate xj
I just hacked mine off with a body saw and called it done.
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
09-08-2005, 07:34 PM
#7
Guest
Posts: n/a
Re: fender flare backing plate xj
I just hacked mine off with a body saw and called it done.
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
09-08-2005, 07:34 PM
#8
Guest
Posts: n/a
Re: fender flare backing plate xj
I just hacked mine off with a body saw and called it done.
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
09-08-2005, 07:34 PM
#9
Guest
Posts: n/a
Re: fender flare backing plate xj
I just hacked mine off with a body saw and called it done.
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
KH
"Cherokee-Ltd" <nospam@home.com> wrote in message
news:VNydnXT1h9BROIbeRVn-iQ@rogers.com...
>I tried welding them but no luck with a stick. Plates are galvanized as
>well. I ended up replacing mine from the dealer at a great price (thanks
>Wayne) but they are scarce.
>
> -Brian
>
> "TF" <flannery16@insightbb.com> wrote in message
> news:QZhSe.325112$xm3.253557@attbi_s21...
>> Replacing / repairing rusted rocker panels on 95 cherokee. Replacing the
>> antenna I already broke off a few of the bolts that hold the flares on.
>> Beforer i rip into the flares to get at rocker panels does anyone know
>> where to get the backing plate with studs? Or has anyone just broke them
>> off and put a bolt in and weld in place to repair?
>>
>> Thanks
>> Tom
>>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
