Fan Belt ?'s
04-23-2005, 04:43 PM
#11
Guest
Posts: n/a
Re: Fan Belt ?'s
Mike Romain did pass the time by typing:
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
04-23-2005, 04:43 PM
#12
Guest
Posts: n/a
Re: Fan Belt ?'s
Mike Romain did pass the time by typing:
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
04-23-2005, 04:43 PM
#13
Guest
Posts: n/a
Re: Fan Belt ?'s
Mike Romain did pass the time by typing:
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
> Idler pulley.
>
> Maybe check out the local wreckers for one.
My ZJ uses a belt routing.
http://www.revbeergoggles.com/temp/beltroute.jpg
> dcollivier wrote:
>>
>> Putting a new Alternator and belt on a 90 Cherokee this weekend, and want to
>> bypass the A/C comp. My parts guy said that there was only one listing for
>> belt's regardless of A/C or not. Do the 4.0's use an idler pulley in the
>> compressors place if non A/C? Anyone here bypass the compressor before? Any
>> help would be appreciated,
04-23-2005, 07:51 PM
#14
Guest
Posts: n/a
Re: Fan Belt ?'s
Thanks for the replies, I am trying to bypass to save fuel, but if I need
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
04-23-2005, 07:51 PM
#15
Guest
Posts: n/a
Re: Fan Belt ?'s
Thanks for the replies, I am trying to bypass to save fuel, but if I need
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
04-23-2005, 07:51 PM
#16
Guest
Posts: n/a
Re: Fan Belt ?'s
Thanks for the replies, I am trying to bypass to save fuel, but if I need
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
04-23-2005, 07:51 PM
#17
Guest
Posts: n/a
Re: Fan Belt ?'s
Thanks for the replies, I am trying to bypass to save fuel, but if I need
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
an idler it may not be worth it.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:426AABCF.3D40D884@***.net...
> Hi Dave,
> Yup, I've never seen that before, using the same belt with or
> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
> you have to replace the pulley bearing it's be far cheaper than running
> down the idler and brackets.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> dcollivier wrote:
> >
> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
want to
> > bypass the A/C comp. My parts guy said that there was only one listing
for
> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
the
> > compressors place if non A/C? Anyone here bypass the compressor before?
Any
> > help would be appreciated,
> >
> > Dave
04-25-2005, 07:42 AM
#18
Guest
Posts: n/a
Re: Fan Belt ?'s
Pull your AC fuse, then your AC compressor magically becomes an idler....
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>
04-25-2005, 07:42 AM
#19
Guest
Posts: n/a
Re: Fan Belt ?'s
Pull your AC fuse, then your AC compressor magically becomes an idler....
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>
04-25-2005, 07:42 AM
#20
Guest
Posts: n/a
Re: Fan Belt ?'s
Pull your AC fuse, then your AC compressor magically becomes an idler....
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>
"dcollivier" <dc.ollivier@sympatico.ca> wrote in message
news:bcBae.29052$Jg5.1510474@news20.bellglobal.com ...
> Thanks for the replies, I am trying to bypass to save fuel, but if I need
> an idler it may not be worth it.
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:426AABCF.3D40D884@***.net...
>> Hi Dave,
>> Yup, I've never seen that before, using the same belt with or
>> without A/C: http://www.----------.com/91XJBelts.pdf I'll bet even if
>> you have to replace the pulley bearing it's be far cheaper than running
>> down the idler and brackets.
>> God Bless America, ßill O|||||||O
>> mailto:--------------------
>>
>> dcollivier wrote:
>> >
>> > Putting a new Alternator and belt on a 90 Cherokee this weekend, and
> want to
>> > bypass the A/C comp. My parts guy said that there was only one listing
> for
>> > belt's regardless of A/C or not. Do the 4.0's use an idler pulley in
> the
>> > compressors place if non A/C? Anyone here bypass the compressor
>> > before?
> Any
>> > help would be appreciated,
>> >
>> > Dave
>
>