It lined up and mine is off to the passenger side also. It all looks right
now, thanks for the help. Now for my next question - see my new post.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >

 

It lined up and mine is off to the passenger side also. It all looks right
now, thanks for the help. Now for my next question - see my new post.

--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4186A5EE.E1A191E0@sympatico.ca...
> So is mine, but we both have 258's.
>
> His motor mount frame pieces look 'nothing' like ours and are not the
> same lengths so those could set his engine anywhere in there, maybe in
> the center with the other bolt hole?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> JimG wrote:
>>
>> Mine was off to the passenger side using 2 bolts into the tranny.
>>
>> --
>> JimG
>> 80' CJ-7 258 CID, HEI
>> 4.56 Gears, Lock-Right F&R
>> 35" BFG MT on 15x10 Centerlines
>> D44 Rear, D30 Front. SOA
>> Dana 300 w/4:1 & Currie twin sticks
>> Warn X8000i w/ dual batteries
>>
>> 00' TJ Sport 4.0L, 5sp
>> 4.56 Gears, TrueTrac rear
>> 33" BFG AT on 15x8 Eagle Alloys
>> D35 Rear, D30 Front. 3" Suspension Lift
>>
>> "HomeBrewer" wrote in message ...
>> > Thanks for the info - greatly appreciated....Now for the tranny mount.
>> > I
>> > have tthree bolt holes in the bottom of the transmission - does the
>> > tranny
>> > mount get centered on the three holes or is it off to one side?
>> > --
>> > _____________________
>> > HomeBrewer
>> > 85CJ7 (in Progress)
>> > http://85cj7.blogspot.com/
>> > 99XJ Sport
>> > Remove the xxx to reply!
>> >

 

It only fits one way. Back up, mine only fits one way.




"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>

 

It only fits one way. Back up, mine only fits one way.




"HomeBrewer" <85cj7XXX@***.net> wrote in message
news:2uiuqhF2b8fpiU1@uni-berlin.de...
> Thanks for the info - greatly appreciated....Now for the tranny mount. I
> have tthree bolt holes in the bottom of the transmission - does the tranny
> mount get centered on the three holes or is it off to one side?
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
> "Jeff Strickland" <crwlr@yahoo.com> wrote in message
> news:10o7gtk1ti8g590@corp.supernews.com...
> >I just looked through my FSM, and could not find the illustration. Let me
> >try from memory.
> >
> > The long bolt has flats in the middle that are off center. The shorter
end
> > is the bottom, it points at the ground. One of the rubber cushions fits
on
> > top of the flats and below the bracket on the transmission. The other
> > cushion goes above the bracket. The cushions are each sandwiched by a
> > large washer, and they in turn sandwich the bracket on the transmission.
> > The bolt is tightened by a nut that is exposed below the skid plate, and
> > the cushions are tightened against the bracket by a nut that fits on top
> > of the bolt..
> >
> > From the top of the large bolt the stacking order is nut, washer,
cushion,
> > transmission bracket, cushion, washer, flats in the middle of the bolt,
> > skid plate, washer, nut.
> >
> >
> >
> >
> >
> > "HomeBrewer" <85cj7XXX@***.net> wrote in message
> > news:2uhpqnF29s1kvU1@uni-berlin.de...
> >> Can someone point me to an exploded view of a transmission torque arm
and
> >> mount in a 76-86 CJ7? My pictures upon disassembly are not quite enough
> >> for me to reassemble.
> >>
> >> --
> >> _____________________
> >> HomeBrewer
> >> 85CJ7 (in Progress)
> >> http://85cj7.blogspot.com/
> >> 99XJ Sport
> >> Remove the xxx to reply!
> >>
> >>
> >
> >
>
>