Exhaust system recommendations?
06-11-2007, 09:53 PM
#1
Guest
Posts: n/a
Exhaust system recommendations?
One other question. Since moving here to Rude Island, my exhaust has been
quickly rotting away and now needs replacement so I can pass inspection.
I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
Deltaflow 40 series muffler with a stainless custom pipe.
Any recomendations?
--
Rich Harris
1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits F/R,
33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
shackles, and a couple more fun tricks.
quickly rotting away and now needs replacement so I can pass inspection.
I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
Deltaflow 40 series muffler with a stainless custom pipe.
Any recomendations?
--
Rich Harris
1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits F/R,
33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
shackles, and a couple more fun tricks.
06-11-2007, 09:57 PM
#2
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich wrote:
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
06-11-2007, 09:57 PM
#3
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich wrote:
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
06-11-2007, 09:57 PM
#4
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich wrote:
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
06-11-2007, 09:57 PM
#5
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich wrote:
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> One other question. Since moving here to Rude Island, my exhaust
> has been quickly rotting away and now needs replacement so I can pass
> inspection. I'm leaning towards a Boorla catback system, OR a
> Flowmaster Stainless Deltaflow 40 series muffler with a stainless
> custom pipe. Any recomendations?
I've been happy with the gibson, but I did aluminized not stainless.
(tornado alley, not rust belt) :/
There is an avi (sound only) on my site that has the gibson with
a stock header. Still need to do one with the Banks header. :)
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
06-11-2007, 10:47 PM
#6
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich,
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
06-11-2007, 10:47 PM
#7
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich,
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
06-11-2007, 10:47 PM
#8
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich,
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
06-11-2007, 10:47 PM
#9
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich,
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
I have the Flowmaster 40 series mufflers (2) on my chevy 350 setup (dual
exhaust). I really like these mufflers. They have been on for three years
now with no problem. Now, it's not Rhode Island (slated roads) but they
were on a Hawaii (lot's of salt air) CJ-7.
So how do you like RI? I was thinking of moving there.
"Rich" <harrisfam1988@verizon.net> wrote in message
news:l0nbi.4051$Mo5.125@trndny08...
> One other question. Since moving here to Rude Island, my exhaust has
> been quickly rotting away and now needs replacement so I can pass
> inspection.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
> Any recomendations?
> --
> Rich Harris
> 1986 CJ7 4.0l head w/MOPAR MPFI, Tom Woods driveshaft, 4:10 w/Detroits
> F/R, 33" BFG MT's, Rubicon Express springs, ProComp MX6 shocks, revolver
> shackles, and a couple more fun tricks.
>
06-11-2007, 11:58 PM
#10
Guest
Posts: n/a
Re: Exhaust system recommendations?
Rich writes:
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
Flowmaster is wonderful, IF that's the sound you want. Solid construction
in every way.
> I'm leaning towards a Boorla catback system, OR a Flowmaster Stainless
> Deltaflow 40 series muffler with a stainless custom pipe.
Flowmaster is wonderful, IF that's the sound you want. Solid construction
in every way.
