Error codes on Jeep Wrangler - Input needed
08-29-2004, 02:41 PM
#31
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
coming into the coil with key on or off. Replaced computer, crankshaft
sensor, camshaft sensor, coil, dist cap and rotor. TIA
2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
coming into the coil with key on or off. Replaced computer, crankshaft
sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-29-2004, 02:41 PM
#32
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
coming into the coil with key on or off. Replaced computer, crankshaft
sensor, camshaft sensor, coil, dist cap and rotor. TIA
2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
coming into the coil with key on or off. Replaced computer, crankshaft
sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-29-2004, 03:08 PM
#33
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
http://minimopar.knizefamily.net/fault/code11.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-29-2004, 03:08 PM
#34
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
http://minimopar.knizefamily.net/fault/code11.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-29-2004, 03:08 PM
#35
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
http://minimopar.knizefamily.net/fault/code11.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
JCraven wrote:
>
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-31-2004, 01:15 AM
#36
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
I'd double check the relays. I have a 94 XJ and I did all the same
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-31-2004, 01:15 AM
#37
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
I'd double check the relays. I have a 94 XJ and I did all the same
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
08-31-2004, 01:15 AM
#38
Guest
Posts: n/a
Re: Error codes on Jeep Wrangler - Input needed
I'd double check the relays. I have a 94 XJ and I did all the same
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
stuff you did. Mine was stalling all the time while driving down the
road. It turned out to be either the fuel pump relay or the auto shut
down relay. I replaced them both. If nothing else, you could swap them
in the relay box and see what happens.
Rob
"JCraven" <john@nospam.triad.rr.com> wrote in message news:<66a10f05424edd0d9e044e66cf00a086@localhost.t alkaboutautos.com>...
> Just wondered if this was ever fixed. I'm tearing my heair out :) 95 YJ
> 2.5L Manual. Code 11 (Ignition) on computer. Engine cut off while running.
> No fire from coil. Relays and fuses appear to be OK. 7 volts on two wires
> coming into the coil with key on or off. Replaced computer, crankshaft
> sensor, camshaft sensor, coil, dist cap and rotor. TIA
Thread
Thread Starter
Forum
Replies
Last Post
joe@dokes.com
Jeep Mailing List
16
06-06-2004 09:10 AM
Walt & Lynda Johnson
Jeep Mailing List
4
05-03-2004 05:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)