engine now making noise
01-29-2004, 09:14 AM
#11
Guest
Posts: n/a
Re: engine now making noise
You 'really' need to be very careful about the parts!!
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-29-2004, 09:14 AM
#12
Guest
Posts: n/a
Re: engine now making noise
You 'really' need to be very careful about the parts!!
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-29-2004, 09:14 AM
#13
Guest
Posts: n/a
Re: engine now making noise
You 'really' need to be very careful about the parts!!
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
You cannot mix and match worn parts, they have to go back the same place
or the engine will fast destroy itself.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I completed one cylinder replacing the valve seals and decided to put the
> valve cover back on after torqueing down the rocker arms on my 4.2L engine.
> I wanted to see if I could tell a difference in this cylinder spark plug
> wise after the change.
>
> Anyway, I'm now hearing a clacking noise when the engine is running. I
> remembered what someone said about replacing the right components back in
> the right place so I took the valve cover back off and changed the rocker
> arms around. This seemed to make the sound better but it's still not
> sounding good.
>
> Any ideas on this?
>
> Thank you,
>
> Bill
01-29-2004, 01:22 PM
#14
Guest
Posts: n/a
Re: engine now making noise
You bought longer push rods?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 01:22 PM
#15
Guest
Posts: n/a
Re: engine now making noise
You bought longer push rods?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 01:22 PM
#16
Guest
Posts: n/a
Re: engine now making noise
You bought longer push rods?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> Ok, when I posted this I then had to run out for a class. When I came back 3
> hours later I took out and changed the push rods around. Torqued it back
> down and it sounded lots better. Either it had time to get the oil in the
> lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 01:55 PM
#17
Guest
Posts: n/a
Re: engine now making noise
No, just changed position from what they previously were.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 01:55 PM
#18
Guest
Posts: n/a
Re: engine now making noise
No, just changed position from what they previously were.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 01:55 PM
#19
Guest
Posts: n/a
Re: engine now making noise
No, just changed position from what they previously were.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40194F6F.5DBCFC4B@***.net...
> You bought longer push rods?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> William Oliveri wrote:
> >
> > Ok, when I posted this I then had to run out for a class. When I came
back 3
> > hours later I took out and changed the push rods around. Torqued it back
> > down and it sounded lots better. Either it had time to get the oil in
the
> > lifters or the push rod swap worked. Either way I'm feeling better.
01-29-2004, 02:34 PM
#20
Guest
Posts: n/a
Re: engine now making noise
Sounds like you mixed them up. More than likely they will fail. Buy
a new set.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> No, just changed position from what they previously were.
a new set.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> No, just changed position from what they previously were.