Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   Eliminating Niose on Ham Radio Jeep TJ? (https://www.jeepscanada.com/jeep-mailing-list-32/eliminating-niose-ham-radio-jeep-tj-30963/)

Nick Hughes 08-20-2005 08:46 PM

Eliminating Niose on Ham Radio Jeep TJ?
 
Hi Folks,

Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
2000 or later? I grounded the tail pipe to the frame, installed .1uF
bypass caps on the fuel pump lead (to ground) and am still experiencing
noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
still experiencing noise poportional to engine RPM.

Any insight appreciated.


Thanks,
Nick


Dick 08-20-2005 09:41 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Have you grounded the hood?
What kind of antenna/mount are you using?
Are you running both + and - directly from the radio to the battery?
Do you have a direct ground from the radio to the Jeep chassis?
Is the feedline coax grounded directly to the Jeep at the antenna end?
Do you know if the noise is from the ignition or the alternator?

----

On 20 Aug 2005 17:46:26 -0700, "Nick ------" <nixon8890@gmail.com>
wrote:

>Hi Folks,
>
>Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
>2000 or later? I grounded the tail pipe to the frame, installed .1uF
>bypass caps on the fuel pump lead (to ground) and am still experiencing
>noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
>still experiencing noise poportional to engine RPM.
>
>Any insight appreciated.
>
>
>Thanks,
>Nick



Dick 08-20-2005 09:41 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Have you grounded the hood?
What kind of antenna/mount are you using?
Are you running both + and - directly from the radio to the battery?
Do you have a direct ground from the radio to the Jeep chassis?
Is the feedline coax grounded directly to the Jeep at the antenna end?
Do you know if the noise is from the ignition or the alternator?

----

On 20 Aug 2005 17:46:26 -0700, "Nick ------" <nixon8890@gmail.com>
wrote:

>Hi Folks,
>
>Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
>2000 or later? I grounded the tail pipe to the frame, installed .1uF
>bypass caps on the fuel pump lead (to ground) and am still experiencing
>noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
>still experiencing noise poportional to engine RPM.
>
>Any insight appreciated.
>
>
>Thanks,
>Nick



Dick 08-20-2005 09:41 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Have you grounded the hood?
What kind of antenna/mount are you using?
Are you running both + and - directly from the radio to the battery?
Do you have a direct ground from the radio to the Jeep chassis?
Is the feedline coax grounded directly to the Jeep at the antenna end?
Do you know if the noise is from the ignition or the alternator?

----

On 20 Aug 2005 17:46:26 -0700, "Nick ------" <nixon8890@gmail.com>
wrote:

>Hi Folks,
>
>Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
>2000 or later? I grounded the tail pipe to the frame, installed .1uF
>bypass caps on the fuel pump lead (to ground) and am still experiencing
>noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
>still experiencing noise poportional to engine RPM.
>
>Any insight appreciated.
>
>
>Thanks,
>Nick



Dick 08-20-2005 09:41 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Have you grounded the hood?
What kind of antenna/mount are you using?
Are you running both + and - directly from the radio to the battery?
Do you have a direct ground from the radio to the Jeep chassis?
Is the feedline coax grounded directly to the Jeep at the antenna end?
Do you know if the noise is from the ignition or the alternator?

----

On 20 Aug 2005 17:46:26 -0700, "Nick ------" <nixon8890@gmail.com>
wrote:

>Hi Folks,
>
>Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
>2000 or later? I grounded the tail pipe to the frame, installed .1uF
>bypass caps on the fuel pump lead (to ground) and am still experiencing
>noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
>still experiencing noise poportional to engine RPM.
>
>Any insight appreciated.
>
>
>Thanks,
>Nick



Jerry Bransford 08-20-2005 11:52 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Nick, where is your radio getting its power from? Does the noise go
away when you disconnect the antenna? Have you replaced your spark
plugs with non-resistor plugs?

Jerry
N6TAY



Nick ------ wrote:
> Hi Folks,
>
> Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
> 2000 or later? I grounded the tail pipe to the frame, installed .1uF
> bypass caps on the fuel pump lead (to ground) and am still experiencing
> noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
> still experiencing noise poportional to engine RPM.
>
> Any insight appreciated.
>
>
> Thanks,
> Nick
>


--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Jerry Bransford 08-20-2005 11:52 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Nick, where is your radio getting its power from? Does the noise go
away when you disconnect the antenna? Have you replaced your spark
plugs with non-resistor plugs?

Jerry
N6TAY



Nick ------ wrote:
> Hi Folks,
>
> Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
> 2000 or later? I grounded the tail pipe to the frame, installed .1uF
> bypass caps on the fuel pump lead (to ground) and am still experiencing
> noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
> still experiencing noise poportional to engine RPM.
>
> Any insight appreciated.
>
>
> Thanks,
> Nick
>


--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Jerry Bransford 08-20-2005 11:52 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Nick, where is your radio getting its power from? Does the noise go
away when you disconnect the antenna? Have you replaced your spark
plugs with non-resistor plugs?

Jerry
N6TAY



Nick ------ wrote:
> Hi Folks,
>
> Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
> 2000 or later? I grounded the tail pipe to the frame, installed .1uF
> bypass caps on the fuel pump lead (to ground) and am still experiencing
> noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
> still experiencing noise poportional to engine RPM.
>
> Any insight appreciated.
>
>
> Thanks,
> Nick
>


--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Jerry Bransford 08-20-2005 11:52 PM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Nick, where is your radio getting its power from? Does the noise go
away when you disconnect the antenna? Have you replaced your spark
plugs with non-resistor plugs?

Jerry
N6TAY



Nick ------ wrote:
> Hi Folks,
>
> Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
> 2000 or later? I grounded the tail pipe to the frame, installed .1uF
> bypass caps on the fuel pump lead (to ground) and am still experiencing
> noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
> still experiencing noise poportional to engine RPM.
>
> Any insight appreciated.
>
>
> Thanks,
> Nick
>


--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.cox.net/jerrypb/

Scott in Baltimore 08-21-2005 01:31 AM

Re: Eliminating Niose on Ham Radio Jeep TJ?
 
Nick ------ wrote:
> Hi Folks,
>
> Has anyone had sucess eliminating Jeep TJ RF noise? Specifically, year
> 2000 or later? I grounded the tail pipe to the frame, installed .1uF
> bypass caps on the fuel pump lead (to ground) and am still experiencing
> noise on 2m/70cm. The bypass cap helped eliminate some noise, but I'm
> still experiencing noise poportional to engine RPM.
>
> Any insight appreciated.
>
>
> Thanks,
> Nick
>


Plus why the other guys said, try cleaning the battery terminals.
If you're using the chassis for your DC ground, run another wire
to your battery for it. Don't forget to fuse both sides.


All times are GMT -4. The time now is 06:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.07407 seconds with 5 queries