Electical Wiring Kits
09-01-2003, 06:14 PM
#1
Guest
Posts: n/a
Electical Wiring Kits
I have an 81 CJ7. I want to redo all of the electrical switches etc that run
into the panel (light switch, radio etc) 1) Is there a kit that would give
me a complete harness 2) Is there one someone would recommend.
BTW.. The beast is running and the tranny and gears are in good shape...
Brakes this week, road certification and its ready for some real world
testing.
--
Cannon
'81 258 CJ7
http://www.moir.com/cj7/cjhome.htm
into the panel (light switch, radio etc) 1) Is there a kit that would give
me a complete harness 2) Is there one someone would recommend.
BTW.. The beast is running and the tranny and gears are in good shape...
Brakes this week, road certification and its ready for some real world
testing.
--
Cannon
'81 258 CJ7
http://www.moir.com/cj7/cjhome.htm
09-01-2003, 06:18 PM
#2
Guest
Posts: n/a
Re: Electical Wiring Kits
http://www.painlessperformance.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Cannon (O|||||||O)" wrote:
>
> I have an 81 CJ7. I want to redo all of the electrical switches etc that run
> into the panel (light switch, radio etc) 1) Is there a kit that would give
> me a complete harness 2) Is there one someone would recommend.
>
> BTW.. The beast is running and the tranny and gears are in good shape...
> Brakes this week, road certification and its ready for some real world
> testing.
>
> --
> Cannon
> '81 258 CJ7
> http://www.moir.com/cj7/cjhome.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Cannon (O|||||||O)" wrote:
>
> I have an 81 CJ7. I want to redo all of the electrical switches etc that run
> into the panel (light switch, radio etc) 1) Is there a kit that would give
> me a complete harness 2) Is there one someone would recommend.
>
> BTW.. The beast is running and the tranny and gears are in good shape...
> Brakes this week, road certification and its ready for some real world
> testing.
>
> --
> Cannon
> '81 258 CJ7
> http://www.moir.com/cj7/cjhome.htm
09-01-2003, 06:18 PM
#3
Guest
Posts: n/a
Re: Electical Wiring Kits
http://www.painlessperformance.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Cannon (O|||||||O)" wrote:
>
> I have an 81 CJ7. I want to redo all of the electrical switches etc that run
> into the panel (light switch, radio etc) 1) Is there a kit that would give
> me a complete harness 2) Is there one someone would recommend.
>
> BTW.. The beast is running and the tranny and gears are in good shape...
> Brakes this week, road certification and its ready for some real world
> testing.
>
> --
> Cannon
> '81 258 CJ7
> http://www.moir.com/cj7/cjhome.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
"Cannon (O|||||||O)" wrote:
>
> I have an 81 CJ7. I want to redo all of the electrical switches etc that run
> into the panel (light switch, radio etc) 1) Is there a kit that would give
> me a complete harness 2) Is there one someone would recommend.
>
> BTW.. The beast is running and the tranny and gears are in good shape...
> Brakes this week, road certification and its ready for some real world
> testing.
>
> --
> Cannon
> '81 258 CJ7
> http://www.moir.com/cj7/cjhome.htm
09-02-2003, 01:18 PM
#4
Guest
Posts: n/a
Re: Electical Wiring Kits
On or about Mon, 1 Sep 2003, Cannon (O|||||||O) of youcantspamme@dumbbot.co...:
> I have an 81 CJ7. I want to redo all of the electrical switches etc that
> run into the panel (light switch, radio etc) 1) Is there a kit that
> would give me a complete harness 2) Is there one someone would
> recommend.
Yep, Painless makes a factory-replacement bumper-to-bumper wiring harness
for your Jeep. They ain't cheap, and I'm not sure why -- there must be a
whopping amount of hand-work in these or they're too used to megabuck
babyboomers building hotrods. Whitney, 4WD.com and Essentials for Jeep
all carry them. Google on _"Painless wiring" Jeep_ for other suppliers.
> I have an 81 CJ7. I want to redo all of the electrical switches etc that
> run into the panel (light switch, radio etc) 1) Is there a kit that
> would give me a complete harness 2) Is there one someone would
> recommend.
Yep, Painless makes a factory-replacement bumper-to-bumper wiring harness
for your Jeep. They ain't cheap, and I'm not sure why -- there must be a
whopping amount of hand-work in these or they're too used to megabuck
babyboomers building hotrods. Whitney, 4WD.com and Essentials for Jeep
all carry them. Google on _"Painless wiring" Jeep_ for other suppliers.
09-02-2003, 01:18 PM
#5
Guest
Posts: n/a
Re: Electical Wiring Kits
On or about Mon, 1 Sep 2003, Cannon (O|||||||O) of youcantspamme@dumbbot.co...:
> I have an 81 CJ7. I want to redo all of the electrical switches etc that
> run into the panel (light switch, radio etc) 1) Is there a kit that
> would give me a complete harness 2) Is there one someone would
> recommend.
Yep, Painless makes a factory-replacement bumper-to-bumper wiring harness
for your Jeep. They ain't cheap, and I'm not sure why -- there must be a
whopping amount of hand-work in these or they're too used to megabuck
babyboomers building hotrods. Whitney, 4WD.com and Essentials for Jeep
all carry them. Google on _"Painless wiring" Jeep_ for other suppliers.
> I have an 81 CJ7. I want to redo all of the electrical switches etc that
> run into the panel (light switch, radio etc) 1) Is there a kit that
> would give me a complete harness 2) Is there one someone would
> recommend.
Yep, Painless makes a factory-replacement bumper-to-bumper wiring harness
for your Jeep. They ain't cheap, and I'm not sure why -- there must be a
whopping amount of hand-work in these or they're too used to megabuck
babyboomers building hotrods. Whitney, 4WD.com and Essentials for Jeep
all carry them. Google on _"Painless wiring" Jeep_ for other suppliers.
09-03-2003, 01:15 PM
#6
Guest
Posts: n/a
Re: Electical Wiring Kits
Hey Bill,
Do you know if anybody makes just portions of the harness? Ex. dash vs.
engine bay, etc.? Don't want to do the whole thing and costs too much for
one fell swoop.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Do you know if anybody makes just portions of the harness? Ex. dash vs.
engine bay, etc.? Don't want to do the whole thing and costs too much for
one fell swoop.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
09-03-2003, 01:15 PM
#7
Guest
Posts: n/a
Re: Electical Wiring Kits
Hey Bill,
Do you know if anybody makes just portions of the harness? Ex. dash vs.
engine bay, etc.? Don't want to do the whole thing and costs too much for
one fell swoop.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Do you know if anybody makes just portions of the harness? Ex. dash vs.
engine bay, etc.? Don't want to do the whole thing and costs too much for
one fell swoop.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
09-03-2003, 03:08 PM
#8
Guest
Posts: n/a
Re: Electical Wiring Kits
Thanks Bill. I've considered fabricating my own circuits. Tell if this
is a really bonehead thing to do. What if I were to rewire the individual
harness portions as independent circuits? My father was an electronics
technician for 23 years and followed on with some simple engineering with
the phone company and finally quality assurance inspections for DoD
communications contracts. So, he was teaching me Ohm's law before the cub
scouts. I'm not an engineer, but... would it be a dumb idea to basically
rewire the different systems instead of all the splices and crossovers,
straying from the original schematic?
My initial thought would be, "bonehead". But, it would be simpler. What
do you think?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
is a really bonehead thing to do. What if I were to rewire the individual
harness portions as independent circuits? My father was an electronics
technician for 23 years and followed on with some simple engineering with
the phone company and finally quality assurance inspections for DoD
communications contracts. So, he was teaching me Ohm's law before the cub
scouts. I'm not an engineer, but... would it be a dumb idea to basically
rewire the different systems instead of all the splices and crossovers,
straying from the original schematic?
My initial thought would be, "bonehead". But, it would be simpler. What
do you think?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
09-03-2003, 03:08 PM
#9
Guest
Posts: n/a
Re: Electical Wiring Kits
Thanks Bill. I've considered fabricating my own circuits. Tell if this
is a really bonehead thing to do. What if I were to rewire the individual
harness portions as independent circuits? My father was an electronics
technician for 23 years and followed on with some simple engineering with
the phone company and finally quality assurance inspections for DoD
communications contracts. So, he was teaching me Ohm's law before the cub
scouts. I'm not an engineer, but... would it be a dumb idea to basically
rewire the different systems instead of all the splices and crossovers,
straying from the original schematic?
My initial thought would be, "bonehead". But, it would be simpler. What
do you think?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
is a really bonehead thing to do. What if I were to rewire the individual
harness portions as independent circuits? My father was an electronics
technician for 23 years and followed on with some simple engineering with
the phone company and finally quality assurance inspections for DoD
communications contracts. So, he was teaching me Ohm's law before the cub
scouts. I'm not an engineer, but... would it be a dumb idea to basically
rewire the different systems instead of all the splices and crossovers,
straying from the original schematic?
My initial thought would be, "bonehead". But, it would be simpler. What
do you think?
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻŻŻ )_)
EM60qk 30.447439N 086.628959W
Thread
Thread Starter
Forum
Replies
Last Post
Neumann Group International
Jeep Mailing List
0
04-04-2004 11:22 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)