edelbrock intake question
07-07-2004, 10:25 PM
#11
Guest
Posts: n/a
Re: edelbrock intake question
The dual plane refers to the plenum of the intake (big hole where the carb
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-07-2004, 10:25 PM
#12
Guest
Posts: n/a
Re: edelbrock intake question
The dual plane refers to the plenum of the intake (big hole where the carb
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-07-2004, 10:25 PM
#13
Guest
Posts: n/a
Re: edelbrock intake question
The dual plane refers to the plenum of the intake (big hole where the carb
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
mounts). A dual plane intake has a divider that splits the hole into two
sections. Edelbrock has several (Dual plane, Single plane, and air gap).
They all make your engine produce hp and torque at different rpm ranges.
The one you want for your Jeep is most likely the Edelbrock Performer Dual
Plane. It should produce the best hp and torque from idle to 4000rpm like
you stated. That's the one I have and I really like it. I also purchased
the cam that goes with it. I've just recently installed the Holley
Projection Fuel Injection kit in my CJ and would highly recommend it. The
carb setup I had before gave me all kinds of problems when off road. I
don't have to worry about stalling anymore. The fuel injection combined
with the Edelbrock intake and cam are a great combination.
Hope I answered your question. I'm pretty sure this is correct info. I'm
sure someone will chime in if I've made a mistake.
Casey Teague
www.justjeepz.com
"HomeBrewer" <t3e871XXX@earthlink.net> wrote in message
news:2l3m64F8cq4sU1@uni-berlin.de...
> While shopping for a intake for my jeep I keep seeing this info along with
> the edelbrock ads: Dual Plane, single four barrel - off idle to 4000 RPM
>
> What exactly does the dual plane and the rpm range mean?
>
> --
> _____________________
> HomeBrewer
> 85CJ7 (in Progress)
> http://85cj7.blogspot.com/
> 99XJ Sport
> Remove the xxx to reply!
>
>
07-07-2004, 10:27 PM
#14
Guest
Posts: n/a
Re: edelbrock intake question
Thanks for the info!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-07-2004, 10:27 PM
#15
Guest
Posts: n/a
Re: edelbrock intake question
Thanks for the info!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-07-2004, 10:27 PM
#16
Guest
Posts: n/a
Re: edelbrock intake question
Thanks for the info!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-07-2004, 10:27 PM
#17
Guest
Posts: n/a
Re: edelbrock intake question
Thanks for the info!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:17 AM
#18
Guest
Posts: n/a
Re: edelbrock intake question
> you stated. That's the one I have and I really like it. I also purchased
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:17 AM
#19
Guest
Posts: n/a
Re: edelbrock intake question
> you stated. That's the one I have and I really like it. I also purchased
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
07-08-2004, 07:17 AM
#20
Guest
Posts: n/a
Re: edelbrock intake question
> you stated. That's the one I have and I really like it. I also purchased
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!
> the cam that goes with it. I've just recently installed the Holley
> Projection Fuel Injection kit in my CJ and would highly recommend it.
I have a Mild edelbrock carb, and it recommends the EDL 2131 (performer)
intake. It is a dual plane, idle to 5500 rpm. Where did you get the holley
kit and how much was it?
--
_____________________
HomeBrewer
85CJ7 (in Progress)
http://85cj7.blogspot.com/
99XJ Sport
Remove the xxx to reply!