Dumb question of Jeep Lift..
#21
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
So I should remove the body lift kit (which seems fun since I didn't
install it or know all the parts to take off), which I'll have to find
some instructions for... but if I do that then I would probably go
with the 3.5 - 4" suspension lift kit.... by doing that is it going to
look dumb with the 31" wheels or will i need to go with the 33"
wheels?..... yep money solves problems but i don't want to spend it
all on the jeep... i have another project going on soon... a 1964
Mercury Parklane... yep a big ol' boat....
#22
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
So I should remove the body lift kit (which seems fun since I didn't
install it or know all the parts to take off), which I'll have to find
some instructions for... but if I do that then I would probably go
with the 3.5 - 4" suspension lift kit.... by doing that is it going to
look dumb with the 31" wheels or will i need to go with the 33"
wheels?..... yep money solves problems but i don't want to spend it
all on the jeep... i have another project going on soon... a 1964
Mercury Parklane... yep a big ol' boat....
#23
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
Generally speaking body lifts, especially more than 1 inch, are renown for
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
#24
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
Generally speaking body lifts, especially more than 1 inch, are renown for
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
#25
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
Generally speaking body lifts, especially more than 1 inch, are renown for
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
causing a lot of problems.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
#26
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
I haven't been following this thread very closely but I think that what they
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
#27
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
I haven't been following this thread very closely but I think that what they
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
#28
Guest
Posts: n/a
Re: Dumb question of Jeep Lift..
I haven't been following this thread very closely but I think that what they
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
want to tell you is generally speaking body lifts, especially more than 1
inch, are renown for
causing a lot of problems. If you want or need a lift there are better ways
to do it.
Especially by a newbie.
"NewbieJeepGuy" <ndittoo@yahoo.com> wrote in message
news:1160631359.939448.322320@k70g2000cwa.googlegr oups.com...
>
> So I should remove the body lift kit (which seems fun since I didn't
> install it or know all the parts to take off), which I'll have to find
> some instructions for... but if I do that then I would probably go
> with the 3.5 - 4" suspension lift kit.... by doing that is it going to
> look dumb with the 31" wheels or will i need to go with the 33"
> wheels?..... yep money solves problems but i don't want to spend it
> all on the jeep... i have another project going on soon... a 1964
> Mercury Parklane... yep a big ol' boat....
>
Thread
Thread Starter
Forum
Replies
Last Post
lanceandrew@aol.com
Jeep Mailing List
3
01-30-2005 12:26 PM
Chuck Bremer
Jeep Mailing List
12
05-19-2004 09:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)