Driveshaft Shop in Raleigh, NC
04-19-2004, 08:31 AM
#2
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
That can't be right... you just had that one re-built! Are you sure your
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
04-19-2004, 08:31 AM
#3
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
That can't be right... you just had that one re-built! Are you sure your
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
04-19-2004, 08:31 AM
#4
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
That can't be right... you just had that one re-built! Are you sure your
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
04-19-2004, 08:31 AM
#5
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
That can't be right... you just had that one re-built! Are you sure your
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
angles are correct?
--
JimG
80' CJ-7, 258 CID, HEI
35" BFG MT's on 15x10 Centerlines
4.56 D30-D44 SOA
D300 w/4:1 & Currie twin sticks
Warn 8000i w/dual batteries
LockRight F&R
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:M9Ggc.22752$6m4.767750@twister.southeast.rr.c om...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
>
>
>
04-19-2004, 08:36 AM
#6
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
04-19-2004, 08:36 AM
#7
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
04-19-2004, 08:36 AM
#8
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
04-19-2004, 08:36 AM
#9
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
"Daren McMorris" <dmcmorris@nc.rr.com> wrote in message news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
> I've trashed yet another Rear CV Driveshaft. (usually one a year with the
> steep angle) Does anyone know where I can get one rebuilt in the Raleigh
> area. Thanks.
>
> Daren
You might want to call one of the guys at Cricket Four Wheel Drive in
Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
know if anyone local can rebuild it.
tim
04-19-2004, 08:16 PM
#10
Guest
Posts: n/a
Re: Driveshaft Shop in Raleigh, NC
Angles are set according to what I've read. I think the last rebuild was
done very poorly. In the past it's been the buggy spring (since removed)
that would cause such severe axle wrap that the shaft would bind.
Daren
"tim collins" <colli037@mc.duke.edu> wrote in message
news:3cdfd602.0404190436.6a0f3da5@posting.google.c om...
> "Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> > I've trashed yet another Rear CV Driveshaft. (usually one a year with
the
> > steep angle) Does anyone know where I can get one rebuilt in the
Raleigh
> > area. Thanks.
> >
> > Daren
>
> You might want to call one of the guys at Cricket Four Wheel Drive in
> Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
> know if anyone local can rebuild it.
>
> tim
done very poorly. In the past it's been the buggy spring (since removed)
that would cause such severe axle wrap that the shaft would bind.
Daren
"tim collins" <colli037@mc.duke.edu> wrote in message
news:3cdfd602.0404190436.6a0f3da5@posting.google.c om...
> "Daren McMorris" <dmcmorris@nc.rr.com> wrote in message
news:<M9Ggc.22752$6m4.767750@twister.southeast.rr. com>...
> > I've trashed yet another Rear CV Driveshaft. (usually one a year with
the
> > steep angle) Does anyone know where I can get one rebuilt in the
Raleigh
> > area. Thanks.
> >
> > Daren
>
> You might want to call one of the guys at Cricket Four Wheel Drive in
> Cary ((919) 467-5510)--they do a lot of work on jeeps, and would prob.
> know if anyone local can rebuild it.
>
> tim
