DOH brakes!
09-07-2007, 10:40 AM
#71
Guest
Posts: n/a
Re: DOH brakes!
DougW wrote:
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
09-07-2007, 10:40 AM
#72
Guest
Posts: n/a
Re: DOH brakes!
DougW wrote:
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
09-07-2007, 10:40 AM
#73
Guest
Posts: n/a
Re: DOH brakes!
DougW wrote:
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
> Old Crow wrote:
>
>>"DougW"> wrote:
>
>
>>>The Cup is used to take the spring clips off the "nails" and to
>>>install them back on. I use a purpose built driver for that.
>>
>>Hate to tell you, but you're using them wrong. The"cup" is for taking
>>the top springs off the anchor pin. Put the cup over the pin, rotate
>>the pliers and the little tab on the cup hooks the spring and lifts it
>>over the end of the anchor pin.
>
>
> doh, your correct. That's why I had to buy one of these for the clips.
> http://us.st11.yimg.com/us.st.yimg.c...1964_483072023
>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
They all have legs, that's why you put leashes on them. Give them an
inch.....
tw
09-07-2007, 06:22 PM
#74
Guest
Posts: n/a
Re: DOH brakes!
http://revbeergoggles.com/temp/dabrakes-doh.jpg
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
09-07-2007, 06:22 PM
#75
Guest
Posts: n/a
Re: DOH brakes!
http://revbeergoggles.com/temp/dabrakes-doh.jpg
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
09-07-2007, 06:22 PM
#76
Guest
Posts: n/a
Re: DOH brakes!
http://revbeergoggles.com/temp/dabrakes-doh.jpg
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
09-07-2007, 06:22 PM
#77
Guest
Posts: n/a
Re: DOH brakes!
http://revbeergoggles.com/temp/dabrakes-doh.jpg
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
Heh. The lower left is the worst point.
Of course at this thickness if they were
rivited the rivits would be grinding.
--
DougW
09-07-2007, 07:05 PM
#78
Guest
Posts: n/a
Re: DOH brakes!
Hi Doug,
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com
09-07-2007, 07:05 PM
#79
Guest
Posts: n/a
Re: DOH brakes!
Hi Doug,
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com
09-07-2007, 07:05 PM
#80
Guest
Posts: n/a
Re: DOH brakes!
Hi Doug,
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com
And your kids grow up, and move away, and you lose that excuse.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"DougW" <I.only.read.usenet@invalid.address> wrote in message
news:1kdEi.31414$L_7.28730@newsfe16.phx...
><snip>
> And I still can't find my brake pliars. :( Don't ya hate it when tools
> grow legs.....
>
> --
> DougW
>
>
--
Posted via a free Usenet account from http://www.teranews.com