Direct Induction Fuel Injection Cleaning Instructions
02-12-2004, 01:42 PM
#11
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Not yet, coming..... By this weekend all tests will be in.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
02-12-2004, 01:42 PM
#12
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Not yet, coming..... By this weekend all tests will be in.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
02-12-2004, 01:42 PM
#13
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Not yet, coming..... By this weekend all tests will be in.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:402BBF3D.36E5F52C@sympatico.ca...
> Did you do the leak down test on the fuel pressure?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I was looking at this:
> >
> > http://www.storesonline.com/site/598452/product/SMI001
> >
> > Can anyone let me know how this is done? Is it just a vacuum tube
connected
> > to the intake manifold and it sucks it out of the can like a straw?
> >
> > Thanks,
> >
> > Bill
02-12-2004, 08:11 PM
#14
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
William Oliveri did pass the time by typing:
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
02-12-2004, 08:11 PM
#15
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
William Oliveri did pass the time by typing:
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
02-12-2004, 08:11 PM
#16
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
William Oliveri did pass the time by typing:
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
Eech.. save your money. At that rate this newsgroup should
cost $50 a day. At least this group has more information than
some huxter selling instructions.
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
For fuel injection the can is actually under about 30-40 psi of pressure
and the cleaner gets pushed into the rail.
It goes like this:
1) disable or bypass stock fuel pump (connect hoses so the gas just
flows back to fool the computer)
2) plug the fuel rail ports
3) screw in a pressurized can of heavy duty injector cleaner/fuel into
the rail pressure port.
4) start car and run till it quits
5) put every thing back and run car for a few miles.
The injector cleaner used is not safe for the fuel pump or hoses, that's why
you have to feed it directly into the rail.
The remainder of servicing includes replacing the fuel filter and maby
cleaning/checking the injectors and replacing O rings if there are leaks.
Adding a bottle of fuel injector cleaner (NOS brand or Valvoline etc) to
the fuel tank with a fill-up is about all you need to do. And then only
once a year or so. The exception being if you get a tank of crapoline
that requires draining and flushing.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
diesel fuel injection
Jeep Mailing List
0
09-18-2006 06:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
