Direct Induction Fuel Injection Cleaning Instructions
02-12-2004, 11:56 AM
#1
Guest
Posts: n/a
Direct Induction Fuel Injection Cleaning Instructions
I was looking at this:
http://www.storesonline.com/site/598452/product/SMI001
Can anyone let me know how this is done? Is it just a vacuum tube connected
to the intake manifold and it sucks it out of the can like a straw?
Thanks,
Bill
http://www.storesonline.com/site/598452/product/SMI001
Can anyone let me know how this is done? Is it just a vacuum tube connected
to the intake manifold and it sucks it out of the can like a straw?
Thanks,
Bill
02-12-2004, 12:27 PM
#2
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Total bull ---- snake oil.
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
02-12-2004, 12:27 PM
#3
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Total bull ---- snake oil.
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
02-12-2004, 12:27 PM
#4
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Total bull ---- snake oil.
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
They refuse to tell you on the site how it works so it is a total rip
off product in my opinion.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
02-12-2004, 12:43 PM
#5
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Most injection cleaning kits tap into the fuel line, if it doesn't go thru
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
02-12-2004, 12:43 PM
#6
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Most injection cleaning kits tap into the fuel line, if it doesn't go thru
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
02-12-2004, 12:43 PM
#7
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Most injection cleaning kits tap into the fuel line, if it doesn't go thru
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
the injector it does nothing. Of course, cleaning injectors by this method
is usually a waste of time and money. Dumping a can of Berrymans Chemtool in
the fuel tank will accomplish the same result over a longer period, and it
works for carbs, too. An injector clogged by deposits is really not a common
occurrence. Chemical salesmen lie worse than politicians.
--
Paul Calman, Hathaway Pines, California
02-12-2004, 01:00 PM
#8
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Did you do the leak down test on the fuel pressure?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
02-12-2004, 01:00 PM
#9
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Did you do the leak down test on the fuel pressure?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
02-12-2004, 01:00 PM
#10
Guest
Posts: n/a
Re: Direct Induction Fuel Injection Cleaning Instructions
Did you do the leak down test on the fuel pressure?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I was looking at this:
>
> http://www.storesonline.com/site/598452/product/SMI001
>
> Can anyone let me know how this is done? Is it just a vacuum tube connected
> to the intake manifold and it sucks it out of the can like a straw?
>
> Thanks,
>
> Bill
