dipstick tube question
12-01-2003, 01:40 PM
#1
Guest
Posts: n/a
dipstick tube question
OK, this will sound like a stupid question but I just went to check my
oil level. I pulled on the dipstick and the whole dipstick *and* the
tube it goes into came right out. I looked at the tube and don't see
anything that looks like would keep it in place. When I reinserted
the tube, it goes waaaaay down inside of the hole, like there's
nothing to keep it in about the position it needs to be in. So now
since I don't know how deep the tube goes in the hole, any dipstick
reading is meaningless. Anybody ever had this happen to them? It's a
304. Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
oil level. I pulled on the dipstick and the whole dipstick *and* the
tube it goes into came right out. I looked at the tube and don't see
anything that looks like would keep it in place. When I reinserted
the tube, it goes waaaaay down inside of the hole, like there's
nothing to keep it in about the position it needs to be in. So now
since I don't know how deep the tube goes in the hole, any dipstick
reading is meaningless. Anybody ever had this happen to them? It's a
304. Thank you.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:38 PM
#2
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 01 Dec 2003 13:40:57 -0500, travis
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:38 PM
#3
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 01 Dec 2003 13:40:57 -0500, travis
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:38 PM
#4
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 01 Dec 2003 13:40:57 -0500, travis
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
<travist34removethis@hotmail.com> shared the following:
>OK, this will sound like a stupid question but I just went to check my
>oil level. I pulled on the dipstick and the whole dipstick *and* the
>tube it goes into came right out. I looked at the tube and don't see
>anything that looks like would keep it in place. When I reinserted
>the tube, it goes waaaaay down inside of the hole, like there's
>nothing to keep it in about the position it needs to be in. So now
>since I don't know how deep the tube goes in the hole, any dipstick
>reading is meaningless. Anybody ever had this happen to them? It's a
>304. Thank you.
I guess what I need is the exact measurement of how many inches the
dipstick tube protrudes out of the block so that I can fashion
something to hold my dipstick tube in the right place. Thanks so much
to anyone who could provide me with this measurement.
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:46 PM
#5
Guest
Posts: n/a
Re: dipstick tube question
Just checked out your link... did you update your site? I see you use a
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
12-01-2003, 04:46 PM
#6
Guest
Posts: n/a
Re: dipstick tube question
Just checked out your link... did you update your site? I see you use a
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
12-01-2003, 04:46 PM
#7
Guest
Posts: n/a
Re: dipstick tube question
Just checked out your link... did you update your site? I see you use a
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
smiley face with beard stubble... you may want to be carefull! You might
**** off the DC gods (see "More Threats" by Nathan). LOL
"travis" <travist34removethis@hotmail.com> wrote in message
news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com...
> On Mon, 01 Dec 2003 13:40:57 -0500, travis
> <travist34removethis@hotmail.com> shared the following:
>
> >OK, this will sound like a stupid question but I just went to check my
> >oil level. I pulled on the dipstick and the whole dipstick *and* the
> >tube it goes into came right out. I looked at the tube and don't see
> >anything that looks like would keep it in place. When I reinserted
> >the tube, it goes waaaaay down inside of the hole, like there's
> >nothing to keep it in about the position it needs to be in. So now
> >since I don't know how deep the tube goes in the hole, any dipstick
> >reading is meaningless. Anybody ever had this happen to them? It's a
> >304. Thank you.
>
> I guess what I need is the exact measurement of how many inches the
> dipstick tube protrudes out of the block so that I can fashion
> something to hold my dipstick tube in the right place. Thanks so much
> to anyone who could provide me with this measurement.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> Happy trails!!!
> :wq!
12-01-2003, 04:50 PM
#8
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 1 Dec 2003 16:46:04 -0500, "Joe" <me@privacy.net
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:50 PM
#9
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 1 Dec 2003 16:46:04 -0500, "Joe" <me@privacy.net
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
12-01-2003, 04:50 PM
#10
Guest
Posts: n/a
Re: dipstick tube question
On Mon, 1 Dec 2003 16:46:04 -0500, "Joe" <me@privacy.net
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!
(jo_ratner@yahoo.com)> shared the following:
>Just checked out your link... did you update your site? I see you use a
>smiley face with beard stubble... you may want to be carefull! You might
>**** off the DC gods (see "More Threats" by Nathan). LOL
heh heh
That'd be just what I need. A good laugh, that is. ;-)
>
>"travis" <travist34removethis@hotmail.com> wrote in message
>news:f3dnsvg6umi6jq6tjm6g4igp2s9k6f73e1@4ax.com.. .
>> On Mon, 01 Dec 2003 13:40:57 -0500, travis
>> <travist34removethis@hotmail.com> shared the following:
>>
>> >OK, this will sound like a stupid question but I just went to check my
>> >oil level. I pulled on the dipstick and the whole dipstick *and* the
>> >tube it goes into came right out. I looked at the tube and don't see
>> >anything that looks like would keep it in place. When I reinserted
>> >the tube, it goes waaaaay down inside of the hole, like there's
>> >nothing to keep it in about the position it needs to be in. So now
>> >since I don't know how deep the tube goes in the hole, any dipstick
>> >reading is meaningless. Anybody ever had this happen to them? It's a
>> >304. Thank you.
>>
>> I guess what I need is the exact measurement of how many inches the
>> dipstick tube protrudes out of the block so that I can fashion
>> something to hold my dipstick tube in the right place. Thanks so much
>> to anyone who could provide me with this measurement.
>>
>>
>>
>> --
>> Travis
>> http://jeepadventures.dyndns.org/jeep.html
>> Happy trails!!!
>> :wq!
>
--
Travis
http://jeepadventures.dyndns.org/jeep.html
Happy trails!!!
:wq!