When my TJ started doing that, it was the Dana 35 rear end self-destructing.
One of the carrier bearings spun and then wore down the spacers allowing the
carrier to contact the bearing caps. The noise was more apparent when
cornering. Once it was at this point the only thing to do was replace the
axle as the case was too chewed up for rebuild. Luckily some moron totalled
an '05 ****** at only 500 miles so I have a nice new axle now. Too bad it's
another crappy D35 :(

Shawn


"americanbuyer" <rcmiller0412@hotmail.com> wrote in message
news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> my differential makes a grinding sound when I make A Right hand turn, I
> know that is not good.
> My question is how to fix it.
>

 

When my TJ started doing that, it was the Dana 35 rear end self-destructing.
One of the carrier bearings spun and then wore down the spacers allowing the
carrier to contact the bearing caps. The noise was more apparent when
cornering. Once it was at this point the only thing to do was replace the
axle as the case was too chewed up for rebuild. Luckily some moron totalled
an '05 ****** at only 500 miles so I have a nice new axle now. Too bad it's
another crappy D35 :(

Shawn


"americanbuyer" <rcmiller0412@hotmail.com> wrote in message
news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> my differential makes a grinding sound when I make A Right hand turn, I
> know that is not good.
> My question is how to fix it.
>

 

>Luckily some moron totalled an '05 ******

John North ****** began production with the ******-Knight in 1908, and
****** Corp. was sold to Kaiser in 1953.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

 

>Luckily some moron totalled an '05 ******

John North ****** began production with the ******-Knight in 1908, and
****** Corp. was sold to Kaiser in 1953.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

 

>Luckily some moron totalled an '05 ******

John North ****** began production with the ******-Knight in 1908, and
****** Corp. was sold to Kaiser in 1953.
--
Stupendous Man,
Defender of Freedom, Advocate of Liberty

 

front or rear??????

Jeff Strickland wrote:

> You have to start by opening the diff.
>
> "americanbuyer" <rcmiller0412@hotmail.com> wrote in message
> news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> > my differential makes a grinding sound when I make A Right hand turn, I
> > know that is not good.
> > My question is how to fix it.
> >

 

front or rear??????

Jeff Strickland wrote:

> You have to start by opening the diff.
>
> "americanbuyer" <rcmiller0412@hotmail.com> wrote in message
> news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> > my differential makes a grinding sound when I make A Right hand turn, I
> > know that is not good.
> > My question is how to fix it.
> >

 

front or rear??????

Jeff Strickland wrote:

> You have to start by opening the diff.
>
> "americanbuyer" <rcmiller0412@hotmail.com> wrote in message
> news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> > my differential makes a grinding sound when I make A Right hand turn, I
> > know that is not good.
> > My question is how to fix it.
> >

 

i have same thing, finally just found out it's not diff, it is u-joints on
front shaft one on front and two at back in house
hth
"americanbuyer" <rcmiller0412@hotmail.com> wrote in message
news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> my differential makes a grinding sound when I make A Right hand turn, I
> know that is not good.
> My question is how to fix it.
>

 

i have same thing, finally just found out it's not diff, it is u-joints on
front shaft one on front and two at back in house
hth
"americanbuyer" <rcmiller0412@hotmail.com> wrote in message
news:598fc48fb61a6dbe01347de01fdbfd30@localhost.ta lkaboutautos.com...
> my differential makes a grinding sound when I make A Right hand turn, I
> know that is not good.
> My question is how to fix it.
>