Differential gear change question
12-13-2006, 08:54 PM
#41
Guest
Posts: n/a
Re: Differential gear change question
Jeff Strickland writes:
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
12-13-2006, 08:54 PM
#42
Guest
Posts: n/a
Re: Differential gear change question
Jeff Strickland writes:
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
12-13-2006, 08:54 PM
#43
Guest
Posts: n/a
Re: Differential gear change question
Jeff Strickland writes:
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
> You can swap the 3.07 carrier and ring gear into the pumpkin that
> now houses the 3.73 carrier and gear.
That's what I'm trying to confirm.
I think the Chrysler manual calls it the "differential case", not the
"carrier". The pumpkin they call the "axle housing".
12-13-2006, 08:57 PM
#44
Guest
Posts: n/a
Re: Differential gear change question
Earle Horton writes:
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
12-13-2006, 08:57 PM
#45
Guest
Posts: n/a
Re: Differential gear change question
Earle Horton writes:
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
12-13-2006, 08:57 PM
#46
Guest
Posts: n/a
Re: Differential gear change question
Earle Horton writes:
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
> 3.73 is one of the "good" ratios. Almost as good as 4.10, which is
> the "best" stock ratio you can get. My advice is to drive the vehicle
> some, to see how you like the new gear ratio.
I am inclined to agree with you, but then I hafta buy a bunch more parts.
12-13-2006, 09:29 PM
#47
Guest
Posts: n/a
Re: Differential gear change question
I'm not convinced this guy understands what is involved in gear set-up (no
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
12-13-2006, 09:29 PM
#48
Guest
Posts: n/a
Re: Differential gear change question
I'm not convinced this guy understands what is involved in gear set-up (no
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
12-13-2006, 09:29 PM
#49
Guest
Posts: n/a
Re: Differential gear change question
I'm not convinced this guy understands what is involved in gear set-up (no
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
insult intended Richard). One with that ability would not be asking some of
these questions (difference between carriers, housings, and bearings).
"Jeff Strickland" wrote in message...
>Since you are convinced you can do the work yourself, then you have no
>labor cost.
12-13-2006, 09:51 PM
#50
Guest
Posts: n/a
Re: Differential gear change question
Just buy the 3.73's for the front. Yes, it is more expensive. BUT, if you
screw up the install, the TJ is still driveable, and its an upgrade. Don't
do a bunch of extra work for no improvement! Keep the LSD and the 3.73's,
upgrade the front gears and be happy.
Carl
"Richard J Kinch" <kinch@truetex.com> wrote in message
news:Xns9898D4AB84B84someconundrum@216.196.97.131. ..
> Jeff Strickland writes:
>
>> You can swap the 3.07 carrier and ring gear into the pumpkin that
>> now houses the 3.73 carrier and gear.
>
> That's what I'm trying to confirm.
>
> I think the Chrysler manual calls it the "differential case", not the
> "carrier". The pumpkin they call the "axle housing".
screw up the install, the TJ is still driveable, and its an upgrade. Don't
do a bunch of extra work for no improvement! Keep the LSD and the 3.73's,
upgrade the front gears and be happy.
Carl
"Richard J Kinch" <kinch@truetex.com> wrote in message
news:Xns9898D4AB84B84someconundrum@216.196.97.131. ..
> Jeff Strickland writes:
>
>> You can swap the 3.07 carrier and ring gear into the pumpkin that
>> now houses the 3.73 carrier and gear.
>
> That's what I'm trying to confirm.
>
> I think the Chrysler manual calls it the "differential case", not the
> "carrier". The pumpkin they call the "axle housing".